Router Bit - Drawer Lock
£26.99
inc. vat
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Drawer Lock Bits
Chosen for their speed and simplicity when joining drawer fronts to sides - Self-Aligning Joints
The wedge-shaped tenons produced will self-align the workpieces for strong, perfectly fitting and attractive joints - Diamond Ground Micro-Grain Tungsten Carbide Tips
Micro-grain structure means the blades offer long lasting hardness and superior edge retention - Perfectly Balanced Machined Steel Bodies
Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life - Brazed By Induction
The tips are attached by induction creating an extremely strong joint between tip and body - Cutting Edge Shear Angle
Gives a smoother, slicing cut to eliminate tear-out and give a superior finish - Anti Kick Back Design
Allows you work safely in accordance with German DIN standards
Product Details
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Drawer Lock Bits
Drawer lock bits are chosen for their speed and simplicity when joining drawer fronts to sides. These bits create an incredibly strong joint with increased surface area for glue application. The wedge-shaped tenons produced will self-align the workpieces for strong, perfectly fitting and attractive joints. To create a drawer lock joint, cut the drawer front flat on the router table with the outside facing upwards. The drawer side is then cut vertically, with the inside facing the fence. Minimum wood thickness for these bits is 12mm. For router table use only.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Drawer Lock Bits
Drawer lock bits are chosen for their speed and simplicity when joining drawer fronts to sides. These bits create an incredibly strong joint with increased surface area for glue application. The wedge-shaped tenons produced will self-align the workpieces for strong, perfectly fitting and attractive joints. To create a drawer lock joint, cut the drawer front flat on the router table with the outside facing upwards. The drawer side is then cut vertically, with the inside facing the fence. Minimum wood thickness for these bits is 12mm. For router table use only.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Drawer Lock Bits
Drawer lock bits are chosen for their speed and simplicity when joining drawer fronts to sides. These bits create an incredibly strong joint with increased surface area for glue application. The wedge-shaped tenons produced will self-align the workpieces for strong, perfectly fitting and attractive joints. To create a drawer lock joint, cut the drawer front flat on the router table with the outside facing upwards. The drawer side is then cut vertically, with the inside facing the fence. Minimum wood thickness for these bits is 12mm. For router table use only.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Drawer Lock Bits
Drawer lock bits are chosen for their speed and simplicity when joining drawer fronts to sides. These bits create an incredibly strong joint with increased surface area for glue application. The wedge-shaped tenons produced will self-align the workpieces for strong, perfectly fitting and attractive joints. To create a drawer lock joint, cut the drawer front flat on the router table with the outside facing upwards. The drawer side is then cut vertically, with the inside facing the fence. Minimum wood thickness for these bits is 12mm. For router table use only.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
R5782
D=31.8mm H=12.7mm A=15° L=46.8mm n.max=18,000 S=1/4"
R5783
D=50.8mm H=12.7mm A=15° L=54mm n.max=18,000 S=1/2"
Show more +
5.000
3
5
Customer Reviews
Reviews (3)
Write Review....
Mr Edgar
This router bit sped up my drawer assembly process, it was very easy to work with. I made my own set up jig which to help even further
David Wiggles
The bit is good quality and works as expected to create strong and secure joints with a neat finish. I only purchased the smaller size because my drawers were not very big, if I ever have a project that requires larger drawers I will be sure to buy the larger bit from Rutlands
Mark Webster
I have the TR430, which has been excellent for making drawers with 10mm or larger thicknesses. It needs a few goes to get a perfect fit, so make sure you have plenty of scraps of the same thickness. Once set, it is a very quick, accurate and strong way to build drawers. I made two chests of drawers with this bit, with 8 drawers in total and it took no more than an hour on the router table to get all the joints cut. The quality of the router bit is excellent , with no noticeable decline in performance during my use. Highly recommended.
Show more +
Router Bit - Drawer Lock - D=31.8mm H=12.7mm A=15° L=46.8mm S=1/4"
Router Bit - Drawer Lock - D=50.8mm H=12.7mm A=15° L=54mm S=1/2"
£26.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process