TCT Router Bit - Flush Trim with Central Bearing - D=18mm H1=15mm H2=9mm L=64.2mm S=1/4"
TCT Router Bit - Flush Trim with Central Bearing - D=18mm H1=15mm H2=9mm L=64.2mm S=1/4"
£49.99
inc. vat
Home > Router Bits > TCT Router Bits > TCT Router Bits > Flush Trim with Central Bearing > TCT Router Bit - Flush Trim with Central Bearing - D=18mm H1=15mm H2=9mm L=64.2mm S=1/4"

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • Flush Trim with Central Bearing Bits
    Used to trim both the top and bottom edges of boards in a single pass
  • Save Time and Increase Productivity
    Eliminating the need to turn the board over to trim the opposing side
  • Diamond Ground Micro-Grain Tungsten Carbide Tips
    Micro-grain structure means the blades offer long lasting hardness and superior edge retention
  • Perfectly Balanced Machined Steel Bodies
    Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life
  • Brazed By Induction
    The tips are attached by induction creating an extremely strong joint between tip and body
  • Cutting Edge Shear Angle
    Gives a smoother, slicing cut to eliminate tear-out and give a superior finish
  • Anti Kick Back Design
    Allows you work safely in accordance with German DIN standards

Show more +

Bundles

Total: £99.97
This Item: TCT Router Bit - Flush Trim with Central Bearing - D=18mm H1=15mm H2=9mm L=64.2mm S=1/4"
£49.99
Total: £54.98
This Item: TCT Router Bit - Flush Trim with Central Bearing - D=18mm H1=15mm H2=9mm L=64.2mm S=1/4"
£49.99

Product Details

TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

Flush Trim with Central Bearing Bits
Flush trim with central bearing bits are used to trim both the top and bottom edges of boards simultaneously, in a single pass. The central bearing follows the core material, saving time and increasing productivity by eliminating the need to turn the board over to trim the opposing side.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

Flush Trim with Central Bearing Bits
Flush trim with central bearing bits are used to trim both the top and bottom edges of boards simultaneously, in a single pass. The central bearing follows the core material, saving time and increasing productivity by eliminating the need to turn the board over to trim the opposing side.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
D 18mm
H1 15mm
H2 9mm
L 64.2mm
n.max 24,000
S 1/4"

Show more +
0 5

Customer Reviews

Reviews (0)
Write Review....

Show more +

TCT Router Bit - Flush Trim with Central Bearing - D=18mm H1=15mm H2=9mm L=64.2mm S=1/4"

Rutlands®
Part No. R5508
£49.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >