TCT Router Bit Set - 2 Piece - Lapped Mitre - 1/2" Shank
£69.99
inc. vat
Home > Routing > Router Bits > Router Bits > Lapped Mitre Bits > TCT Router Bit Set - 2 Piece - Lapped Mitre - 1/2" Shank
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Lapped Mitre Bits
Produce a simple self-aligning joint, with plenty of surface area for gluing, ideal for plywood and MDF - Diamond Ground Micro-Grain Tungsten Carbide Tips
Micro-grain structure means the blades offer long lasting hardness and superior edge retention - Perfectly Balanced Machined Steel Bodies
Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life - Brazed By Induction
The tips are attached by induction creating an extremely strong joint between tip and body - Cutting Edge Shear Angle
Gives a smoother, slicing cut to eliminate tear-out and give a superior finish - Anti Kick Back Design
Allows you work safely in accordance with German DIN standards
Bundles
This Item: TCT Router Bit Set - 2 Piece - Lapped Mitre - 1/2" Shank
£69.99
Product Details
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Lapped Mitre Bits
This 2 piece lapped mitre router bit set has been designed to create strong and attractive joints in plywood and MDF but can also be used on softwoods and hardwoods. Conventional lock mitre bits create profiles with delicate fingers that can easily break when working with materials such as plywood and MDF. These lapped mitre bits work well with these materials as they produce a simple self-aligning joint with plenty of surface area for gluing. This set contains a half lap profile and a 45° mitre profile which combine to produce a secure joint that hides the edges of the plywood or MDF. Minimum wood thickness for these bits is 12.7mm and the maximum wood thickness is 19.1mm and they are designed for router table use only.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Lapped Mitre Bits
This 2 piece lapped mitre router bit set has been designed to create strong and attractive joints in plywood and MDF but can also be used on softwoods and hardwoods. Conventional lock mitre bits create profiles with delicate fingers that can easily break when working with materials such as plywood and MDF. These lapped mitre bits work well with these materials as they produce a simple self-aligning joint with plenty of surface area for gluing. This set contains a half lap profile and a 45° mitre profile which combine to produce a secure joint that hides the edges of the plywood or MDF. Minimum wood thickness for these bits is 12.7mm and the maximum wood thickness is 19.1mm and they are designed for router table use only.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Lapped Mitre Bits
This 2 piece lapped mitre router bit set has been designed to create strong and attractive joints in plywood and MDF but can also be used on softwoods and hardwoods. Conventional lock mitre bits create profiles with delicate fingers that can easily break when working with materials such as plywood and MDF. These lapped mitre bits work well with these materials as they produce a simple self-aligning joint with plenty of surface area for gluing. This set contains a half lap profile and a 45° mitre profile which combine to produce a secure joint that hides the edges of the plywood or MDF. Minimum wood thickness for these bits is 12.7mm and the maximum wood thickness is 19.1mm and they are designed for router table use only.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Lapped Mitre Bits
This 2 piece lapped mitre router bit set has been designed to create strong and attractive joints in plywood and MDF but can also be used on softwoods and hardwoods. Conventional lock mitre bits create profiles with delicate fingers that can easily break when working with materials such as plywood and MDF. These lapped mitre bits work well with these materials as they produce a simple self-aligning joint with plenty of surface area for gluing. This set contains a half lap profile and a 45° mitre profile which combine to produce a secure joint that hides the edges of the plywood or MDF. Minimum wood thickness for these bits is 12.7mm and the maximum wood thickness is 19.1mm and they are designed for router table use only.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
BIT 1
D=35mm H=22.2mm A=45° S=1/2"
BIT 2
D=50mm H=25.4mm A=45° S=1/2"
Show more +
5.000
1
5
Customer Reviews
Reviews (1)
Write Review....
Tim Stainsby
Great router bits if you need to create concealed mitre joints in plywood. The bits allow you create simple profiles that will not break, which are perfectly matching. As usual the quality of Rutlands router bits is suberb.
Show more +
Premium Right Angle and Flexible Bit Holders - Set of 3
Premium Tenon Saw - 300mm x 12 ppi
No 43 Plough Plane
Premium Biscuit Jointer
Premium Wood Carving No 12 V Parting Tool - 6mm
Premium Toolbox Hand Saw - 380mm x 12 ppi
200mm Planer Thicknesser
Premium Bevel Edge Chisels - Set of 6
No 5 Jack Plane
Aluminium Bench Dogs - 19mm - Pack of 2
Premium Wood Carving No 11 Veiner - 3mm
Premium Hand, Tenon and Toolbox Saws - Set of 3
No 4 Smoothing Plane
Premium Tool Roll
18v Brushless Cordless 1/4" Router with 1 x 4.0Ah Li-ion Battery and Trimming, Offset & Tilting Base
18v Brushless Cordless 1/4" Router with 1 x 4.0Ah Li-ion Battery
Oscillating Multi Tool
Premium Wood Carving No 9 Gouge - 10mm
Premium Wood Carving No 8A Spoon Gouge - 10mm
Premium Steel Triple Pocket Hole Jig
Premium Bench Planer
Wetstone Sharpener with Woodturning and Carving Jig Kit
Wetstone Sharpener with Master Jig Kit
Premium Roller Lifts - Pack of 2
Neodymium Magnetic Jig Block
Premium Aluminium Triple Pocket Hole Jig
Silicone Glue Brushes - Pack of 40
Premium Hand Saw - 550mm x 8 ppi
Digital Moisture Meter for Hardwoods & Softwoods
Premium HVLP Spray Gun
Silicone Glue Brush Kit
Precision Aluminium Magnetic Saw Guide - Set of 2
Premium Staples - 18 Gauge - Bumper Pack of 15,000 (16mm, 19mm and 25mm)
Precision Letter and Number Stamping Set - 36 Piece
Premium Apron
Premium Conical Japanese Water Stones - Set of 2
Planer Blade Setting Jig
Stainless Steel Bench Dogs - 20mm - Pack of 4
Premium Wood Carving No 5 Gouge - 8mm
Premium Wood Carving No 7 Gouge - 14mm
Mini Air Blower and Vacuum
Premium Wood Carving No 1S Skew Chisel - 8mm
Premium Wood Carving No 7 Gouge - 6mm
125mm Ceramic Multi Hole Abrasive Discs
Premium Wood Carving Tools - Set of 6
Precision Aluminium Fine Point Knife with 10 Blades
Mini Bench Grinder with Flexi Shaft
Premium Wood Carving No 7L Heavy Bent Gouge - 20mm
Premium Revolving Sander Abrasive Discs - Pack of 24
Premium Chuck Extender with Keyless Chuck
Precision Aluminium Knife with 10 Blades
Wetstone Sharpener with Reversible, Variable Speed, Permanent Magnet Motor
Bench Pillar Drill
Router Table with Lift & Motor
Utility Dowel Jig
Premium Forstner Sawtooth Drill Bits - Set of 22
Premium Woodthreading Kit
Premium Roller Bearings - Set of 10
Premium Bevel Edge Chisels - Set of 11
Aluminium Glue Brushes - Pack of 50
Rotary Multi-Tool Kit
Premium Wood Carving No 1 Straight Chisel - 8mm
150mm Ceramic Multi Hole Abrasive Discs
Premium Pen Press
Premium Aluminium 35mm Hinge Jig
Plunge Saw with 1.4m Guide Rail
Foam Brushes - Pack of 75
Premium Airbrush Kit
Precision Calliper & Divider Set
Precision Rule & Stop - 300mm
Premium Wood Carving No 8 Gouge - 4mm
Utility Butt Chisels - Set of 6
Precision Dovetail Marker
Engraving Tool
Precision Trammel Set
Premium Wood Carving Tools - Set of 12
Premium Aluminium Edge Trimmer
Premium Wood Carving No 5 Gouge - 20mm
Premium Wood Screws - Torx Head - 1,700 Piece
Premium Aluminium Drill Guide Block - 2mm to 6mm
£69.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £14.99
- Saturday Next Day UK - £14.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process