TCT Router Bit Set - 2 Piece - Tongue & Groove - 1/2" Shank
TCT Router Bit Set - 2 Piece - Tongue & Groove - 1/2" Shank
£39.99
inc. vat
Home > Routing > Router Bits > Router Bits > Tongue & Groove Bits > TCT Router Bit Set - 2 Piece - Tongue & Groove - 1/2" Shank

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • Tongue & Groove Bits
    Used for the fast and accurate production of strong, interlocking joints with an increased surface area for glue application
  • Diamond Ground Micro-Grain Tungsten Carbide Tips
    Micro-grain structure means the blades offer long lasting hardness and superior edge retention
  • Perfectly Balanced Machined Steel Bodies
    Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life
  • Brazed By Induction
    The tips are attached by induction creating an extremely strong joint between tip and body
  • Cutting Edge Shear Angle
    Gives a smoother, slicing cut to eliminate tear-out and give a superior finish
  • Anti Kick Back Design
    Allows you work safely in accordance with German DIN standards

Show more +

Product Details

TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

Tongue & Groove Bits
Tongue & groove bits are used for the fast and accurate production of strong, interlocking joints with an increased surface area for glue application. This 2 piece set contains one bit to groove the slot and a separate bit to produce the tongue. These bits are typically used for the construction of panelling, table tops and strip flooring. Minimum wood thickness for these bits is 9.53mm and the maximum thickness is 18.2mm. For router table use only.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

Tongue & Groove Bits
Tongue & groove bits are used for the fast and accurate production of strong, interlocking joints with an increased surface area for glue application. This 2 piece set contains one bit to groove the slot and a separate bit to produce the tongue. These bits are typically used for the construction of panelling, table tops and strip flooring. Minimum wood thickness for these bits is 9.53mm and the maximum thickness is 18.2mm. For router table use only.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
Tongue bit D=47.6mm H=19.1mm T=12.7mm
Groove bit D=47.6mm H=6.35mm T=12.7mm

Show more +
4.800 5 5

Customer Reviews

Reviews (5)
Write Review....

Adi Ruddle Mbe

Great packing for the bits including a quality box to keep the bits safe clean and tidy.
The cutters are extremely precise and have produced excellent results.
Very pleased and will continue to buy from Rutlands

Woody Woodman

Lovely bits & they come in a solid little box so great for storage without them getting damaged. They cut beautifully and I'll be finding more reasons to use them in future.

Raymond Howes

Very good quality. So simple to make your own tongue and groove to the width you want. A great addition to anyones kit. Should have bought a set years ago.

Alan Webb

Very nice little set. Good quality cutters. Solidly made and well presented in a storage case. Will definitely buy more in this range.

Harry Parrott

Quality set, has both cutters I need, stored away in a nice little box, the bits themselves are of a good quality, will get plenty of use out of them

Show more +

TCT Router Bit Set - 2 Piece - Tongue & Groove - 1/2" Shank

Rutlands®
Part No. TR23
£39.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >