TCT Router Bit - V-Groove
TCT Router Bit - V-Groove
£15.99
inc. vat
Home > Routing > Router Bits > Router Bits > V-Groove Bits > TCT Router Bit - V-Groove

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • V-Groove Bits
    Used to produce clean, sharp, V shaped grooves in the surfaces of material, ideal for engraving, sign writing and lettering
  • Diamond Ground Micro-Grain Tungsten Carbide Tips
    Micro-grain structure means the blades offer long lasting hardness and superior edge retention
  • Perfectly Balanced Machined Steel Bodies
    Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life
  • Brazed By Induction
    The tips are attached by induction creating an extremely strong joint between tip and body
  • Cutting Edge Shear Angle
    Gives a smoother, slicing cut to eliminate tear-out and give a superior finish
  • Anti Kick Back Design
    Allows you work safely in accordance with German DIN standards

Show more +

Product Details

TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

V-Groove Bits
V-groove bits are used to produce clean, sharp, V shaped grooves in the surfaces of material. Commonly used for engraving, sign writing and lettering, these bits can also be used to make a series of vertical grooves, imitating the appearance of tongue and groove panels on large pieces of material. When used in a router table with a fence, a basic chamfered edge can also be produced.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

V-Groove Bits
V-groove bits are used to produce clean, sharp, V shaped grooves in the surfaces of material. Commonly used for engraving, sign writing and lettering, these bits can also be used to make a series of vertical grooves, imitating the appearance of tongue and groove panels on large pieces of material. When used in a router table with a fence, a basic chamfered edge can also be produced.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

R5803 D=12.7mm H=15.7mm A=60° L=50mm n.max=24,000 S=1/4"
R5804 D=12.7mm H=10.5mm A=90° L=44.5mm n.max=24,000 S=1/4"
R5805 D=19mm H=15mm A=90° L=49mm n.max=24,000 S=1/4"
R5806 D=31.8mm H=20mm A=90° L=65mm n.max=18,000 S=1/2"
R5807 D=38.1mm H=25mm A=90° L=70mm n.max=18,000 S=1/2"

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

Rob G

Usual great price/quality combination.

Show more +
Show more +

TCT Router Bit - V-Groove

Rutlands®
Part No. M_R5803
£15.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Parcelforce 24 - £6.99
  • UPS Next Working Day - £8.99
       (Order before 1pm)
  • International - Choose Destination


* Notice
Parcelforce and Royal Mail have upcoming strikes planned on the 9th and 11th December that could potentially cause a delay to the delivery of your order. Please allow additional time for your order to arrive. We apologise for any inconvenience caused.

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >