
Premium Router Table Top
£139.99
inc. vat
Key Features
- Lifetime Warranty
If any router table top fails due to a material or manufacturing defect it will be replaced free of charge - Thick 27mm Phenolic Laminate Top
Effortlessly smooth, hard wearing finish with great impact resistance that will stay perfectly flat during its lifetime - Strong Edge Banding
Provides a long lasting durable barrier to protect against those accidental collisions - Large 800 x 600mm Work Surface
Route all sizes of workpiece including long boards with complete confidence and ease - Frictionless Design
Gives you complete control when guiding your workpiece - 8.3mm and 19mm T Tracks
Inset across the length of the work surface, for the mounting of mitre gauges, feather boards, stops and other accessories
Bundles
Product Details
This premium quality router table top will expand your routing capabilities and allow you to use a wider variety of router bits, including larger diameter bits too big to control in a handheld router. Any router bit over 38mm in diameter is not recommended for use in a handheld router. Take full control of the workpiece rather than the heavy router and make working with material whether big or small safer and quicker.
Work across a large 800x600mm, 27mm thick phenolic laminated worktop that will give you the highest quality routing experience. Laminated on both sides for durability with a thick external grade high pressure laminate, which is sandwiched around a solid moisture resistant composite core. This moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. With strong edge banding for superior durability and impact resistance, this table top is tough enough to withstand the most demanding of users, whether you're a busy tradesman or budding enthusiast.
Set into the work surface is a full length extruded aluminium double T track, 19mm and 8.3mm in width for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time. This means whether clamping feather boards or sliding along mitre gauges, your track will stay smooth to operate every single time.
The table top is pre-cut to accept a 295x235mm sized router insert plate, such as the Rutlands R5010 premium aluminium insert plate or R5075 premium router lift and it has been pre-drilled to accept the Rutlands R5008 premium router table stand. This router table top has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect it will be replaced free of charge. ©
Work across a large 800x600mm, 27mm thick phenolic laminated worktop that will give you the highest quality routing experience. Laminated on both sides for durability with a thick external grade high pressure laminate, which is sandwiched around a solid moisture resistant composite core. This moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. With strong edge banding for superior durability and impact resistance, this table top is tough enough to withstand the most demanding of users, whether you're a busy tradesman or budding enthusiast.
Set into the work surface is a full length extruded aluminium double T track, 19mm and 8.3mm in width for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time. This means whether clamping feather boards or sliding along mitre gauges, your track will stay smooth to operate every single time.
The table top is pre-cut to accept a 295x235mm sized router insert plate, such as the Rutlands R5010 premium aluminium insert plate or R5075 premium router lift and it has been pre-drilled to accept the Rutlands R5008 premium router table stand. This router table top has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect it will be replaced free of charge. ©
This premium quality router table top will expand your routing capabilities and allow you to use a wider variety of router bits, including larger diameter bits too big to control in a handheld router. Any router bit over 38mm in diameter is not recommended for use in a handheld router. Take full control of the workpiece rather than the heavy router and make working with material whether big or small safer and quicker.
Work across a large 800x600mm, 27mm thick phenolic laminated worktop that will give you the highest quality routing experience. Laminated on both sides for durability with a thick external grade high pressure laminate, which is sandwiched around a solid moisture resistant composite core. This moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. With strong edge banding for superior durability and impact resistance, this table top is tough enough to withstand the most demanding of users, whether you're a busy tradesman or budding enthusiast.
Set into the work surface is a full length extruded aluminium double T track, 19mm and 8.3mm in width for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time. This means whether clamping feather boards or sliding along mitre gauges, your track will stay smooth to operate every single time.
The table top is pre-cut to accept a 295x235mm sized router insert plate, such as the Rutlands R5010 premium aluminium insert plate or R5075 premium router lift and it has been pre-drilled to accept the Rutlands R5008 premium router table stand. This router table top has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect it will be replaced free of charge. ©
Work across a large 800x600mm, 27mm thick phenolic laminated worktop that will give you the highest quality routing experience. Laminated on both sides for durability with a thick external grade high pressure laminate, which is sandwiched around a solid moisture resistant composite core. This moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. With strong edge banding for superior durability and impact resistance, this table top is tough enough to withstand the most demanding of users, whether you're a busy tradesman or budding enthusiast.
Set into the work surface is a full length extruded aluminium double T track, 19mm and 8.3mm in width for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time. This means whether clamping feather boards or sliding along mitre gauges, your track will stay smooth to operate every single time.
The table top is pre-cut to accept a 295x235mm sized router insert plate, such as the Rutlands R5010 premium aluminium insert plate or R5075 premium router lift and it has been pre-drilled to accept the Rutlands R5008 premium router table stand. This router table top has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands
Work Surface Material
High pressure phenolic laminate
Overall Length
800mm
Overall Width
600mm
Overall Thickness
27mm
Insert Plate Opening
295x235mm
T Track Widths
19mm and 8.3mm
T Track Material
Extruded aluminium
Show more +
5.000
2
5
Customer Reviews
Reviews (2)
Write Review....
Jonas Engström
Chris Heath
I though about making my own router table top but when I worked out the cost to make a similar top it was obvious that for a £20 more that this was the better option. Glad I decided to purchase this as it saved me the effort of making one. Good quality and well made. Well packed so not damaged in transit. I recommend this.
Show more +
£139.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process
Sturdy and gives a good quality impression. Worth the extra hassle with Swedish Vat and customs.