Premium Router Table GTS- with Insert Plate
£899.99
inc. vat
Home > Routing > Router Tables & Lifts > Router Tables > Phenolic Laminate Router Tables > Phenolic Laminate Router Tables - GTS > Premium Router Table GTS- with Insert Plate
Key Features
- Premium Performance Router Table Package
Including table top, table stand, fence, insert plate, two double feather boards, sliding carriage and two router bit holders - Lifetime Warranty
If any part fails due to a material or manufacturing defect the component will be replaced free of charge - Premium Router Table Stand
Box-section steel gives guaranteed strength and rigidity with each foot being fitted with a heavy-duty rubber pad for vibration dampening - Premium Router Table Top
Laminated on both faces with a low friction premium-grade phenolic that prevents moisture absorption. supplied with an aluminium double t track - Premium Router Table Fence
Precision CNC machined aluminium with low friction, phenolic laminate sub-fences - Premium Router Table Aluminium Insert Plate
Made from 10mm anodized aluminium and is extremely strong, perfectly flat and features an abrasion resistant finish - Premium Sliding Carriage
Engineered for precision to achieve superior end grain cuts compared to traditional track mounted mitre gauges - Premium Double Feather Boards
Allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers - Premium Router Bit Holders
Perfect solution to organise and store your router bits - Further Information
More information about any of the components of this table can be found on the individual product pages
Bundles
This Item: Premium Router Table GTS- with Insert Plate
£899.99
This Item: Premium Router Table GTS- with Insert Plate
£899.99
Product Details
This premium performance Rutlands® router table features the R5008 router table stand, R5007 router table top, R5009 router table fence, R5010 insert plate, two R5015 double feather boards, R5012 sliding carriage and a pack of two R5067 router bit holders.
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.
Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.
Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with Rutlands® flip stops and on the front face there is another 8.3mm T Track for mounting Rutlands® featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing. The two fence support brackets are mounted to each side of router table top, allowing the fence to be moved back and forth. An adjustable metric scale on the fence brackets allows you to precisely align, zero and set the position of the fence to the router bit.
Premium Router Table Aluminium Insert Plate R5010
This router table insert plate is made from 10mm anodized aluminium and is extremely strong, perfectly flat and features an abrasion resistant finish. The plate is compatible with all plunge routers with a maximum base diameter of 200mm. An 90mm aperture accommodates large router bits, whilst the two polycarbonate click-fit insert rings of 50mm and 35mm are used with smaller diameter bits. To mount a router, you use the router's sub-base as a template to drill the plate, having positioned the set-up ring and centering pin to ensure your router is centrally mounted. A series of fine-thread adjustment screws allow you to level the plate perfectly flush with the table. The insert plate is supplied with a top mounted guide pin, featuring a free-spinning plastic barrel to enables free hand and pattern shape routing.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.
Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.
Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. They can be attached to your router table stand or they can be wall mounted. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.
Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.
Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with Rutlands® flip stops and on the front face there is another 8.3mm T Track for mounting Rutlands® featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing. The two fence support brackets are mounted to each side of router table top, allowing the fence to be moved back and forth. An adjustable metric scale on the fence brackets allows you to precisely align, zero and set the position of the fence to the router bit.
Premium Router Table Aluminium Insert Plate R5010
This router table insert plate is made from 10mm anodized aluminium and is extremely strong, perfectly flat and features an abrasion resistant finish. The plate is compatible with all plunge routers with a maximum base diameter of 200mm. An 90mm aperture accommodates large router bits, whilst the two polycarbonate click-fit insert rings of 50mm and 35mm are used with smaller diameter bits. To mount a router, you use the router's sub-base as a template to drill the plate, having positioned the set-up ring and centering pin to ensure your router is centrally mounted. A series of fine-thread adjustment screws allow you to level the plate perfectly flush with the table. The insert plate is supplied with a top mounted guide pin, featuring a free-spinning plastic barrel to enables free hand and pattern shape routing.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.
Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.
Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. They can be attached to your router table stand or they can be wall mounted. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
This premium performance Rutlands® router table features the R5008 router table stand, R5007 router table top, R5009 router table fence, R5010 insert plate, two R5015 double feather boards, R5012 sliding carriage and a pack of two R5067 router bit holders.
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.
Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.
Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with Rutlands® flip stops and on the front face there is another 8.3mm T Track for mounting Rutlands® featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing. The two fence support brackets are mounted to each side of router table top, allowing the fence to be moved back and forth. An adjustable metric scale on the fence brackets allows you to precisely align, zero and set the position of the fence to the router bit.
Premium Router Table Aluminium Insert Plate R5010
This router table insert plate is made from 10mm anodized aluminium and is extremely strong, perfectly flat and features an abrasion resistant finish. The plate is compatible with all plunge routers with a maximum base diameter of 200mm. An 90mm aperture accommodates large router bits, whilst the two polycarbonate click-fit insert rings of 50mm and 35mm are used with smaller diameter bits. To mount a router, you use the router's sub-base as a template to drill the plate, having positioned the set-up ring and centering pin to ensure your router is centrally mounted. A series of fine-thread adjustment screws allow you to level the plate perfectly flush with the table. The insert plate is supplied with a top mounted guide pin, featuring a free-spinning plastic barrel to enables free hand and pattern shape routing.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.
Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.
Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. They can be attached to your router table stand or they can be wall mounted. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.
Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.
Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with Rutlands® flip stops and on the front face there is another 8.3mm T Track for mounting Rutlands® featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing. The two fence support brackets are mounted to each side of router table top, allowing the fence to be moved back and forth. An adjustable metric scale on the fence brackets allows you to precisely align, zero and set the position of the fence to the router bit.
Premium Router Table Aluminium Insert Plate R5010
This router table insert plate is made from 10mm anodized aluminium and is extremely strong, perfectly flat and features an abrasion resistant finish. The plate is compatible with all plunge routers with a maximum base diameter of 200mm. An 90mm aperture accommodates large router bits, whilst the two polycarbonate click-fit insert rings of 50mm and 35mm are used with smaller diameter bits. To mount a router, you use the router's sub-base as a template to drill the plate, having positioned the set-up ring and centering pin to ensure your router is centrally mounted. A series of fine-thread adjustment screws allow you to level the plate perfectly flush with the table. The insert plate is supplied with a top mounted guide pin, featuring a free-spinning plastic barrel to enables free hand and pattern shape routing.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.
Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.
Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. They can be attached to your router table stand or they can be wall mounted. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
Show more +
Specifications
Brand
Rutlands®
R5046
Premium Router Table
Table Top Dimensions
800mm x 600mm
Work Surface Material
High pressure phenolic laminate
Fence Height
90mm
Fence Material
Extruded aluminium
Sub-Fence Height
65mm
Sub-Fence Surface Material
High pressure phenolic laminate
Fence Length
Adjustable from 910mm to 1150mm
Fence Travel
375mm
T Track Widths
19mm and 6.3mm
Overall Length
800mm
Overall Width
600mm
Overall Height
900mm
Dust Port Diameter
63mm
R5010
Premium Router Table Aluminium Insert Plate
Insert Plate Material
Aluminium
Insert Plate Length
298mm
Insert Plate Width
235mm
Insert Plate Thickness
10mm
Maximum Router Base Diameter
200mm
Insert Plate Opening
90mm
Insert Ring Openings
50mm and 35mm
R5012
Premium Router Table Sliding Carriage
Carriage Material
6061 aluminium alloy
Angle of Rotation
90°
Length of Travel
455mm
Carriage Sub-Fence Surface Material
High pressure phenolic laminate
Carriage Sub-Fence Height
75mm
Carriage Sub-Fence Length
300mm
R5015
Premium Double Feather Board
Feather Board Material
High impact moulded plastic
Feather Board Width
130mm
Feather Board Length
Up to 140mm
Feather Board Face Height
13mm
Stacked Face Height
37mm
Track Hardware
Hex bolts for 6.35mm or 8.3mm T track and slot bar for 19mm T track
R5067
Premium Router Bit Holders
Length
550mm
Depth
75mm
Height
80mm
1/4" Capacity
11
1/2" Capacity
24
Show more +
0
5
Customer Reviews
Reviews (0)
Write Review....
£899.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process