Router Table GTS - R20 Electronic Lift and Motor
£1599.99
inc. vat
Home > Routing > Router Tables & Lifts > Router Tables > Phenolic Laminate Router Tables > Phenolic Laminate Router Tables - GTS > Router Table GTS - R20 Electronic Lift and Motor
Key Features
- Lifetime Warranty
If any part fails due to a material or manufacturing defect the component will be replaced free of charge - Premium Performance Router Table Package
Including table top, table stand, fence, electronic router lift, motor, two double feather boards, sliding carriage and two router bit holders - Premium Router Table Stand
Box-section steel gives guaranteed strength and rigidity with each foot being fitted with a heavy-duty rubber pad for vibration dampening - Premium Router Table Top
Laminated on both faces with a low friction premium-grade phenolic that prevents moisture absorption. supplied with an aluminium double t track - Premium Router Table Fence
Precision CNC machined aluminium with low friction, phenolic laminate sub-fences - Premium Router Lift Motor
2400W variable speed motor that features a torque control system, soft start technology, air cool system and dust protection system - Premium Electronic Router Lift - R20
Significantly reduces set up time and ensures pin point accuracy when table routing with rise and fall operated by a digital control box with an LED display - Premium Sliding Carriage
Engineered for precision to achieve superior end grain cuts compared to traditional track mounted mitre gauges - Premium Double Feather Boards
Allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers - Premium Router Bit Holders
Perfect solution to organise and store your router bits - Further Information
More information about any of the components of this table can be found on the individual product pages
Bundles
This Item: Router Table GTS - R20 Electronic Lift and Motor
£1,599.99
This Item: Router Table GTS - R20 Electronic Lift and Motor
£1,599.99
Product Details
This premium performance Rutlands® router table features the R5008 router table stand, R5007 router table top, R5009 router table fence, R5063 electronic router lift, R5018 router motor, two R5015 double feather boards, R5012 sliding carriage and a pack of two R5067 router bit holders.
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.
Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.
Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with Rutlands® flip stops and on the front face there is another 8.3mm T Track for mounting Rutlands® featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing.
Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.
Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience. An air cool system ensures a constant flow of fresh air to prevent the risk of the motor overheating, when installed in the Rutlands® dust box or in a close-sided router table.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.
Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.
Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.
Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.
Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with Rutlands® flip stops and on the front face there is another 8.3mm T Track for mounting Rutlands® featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing.
Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.
Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience. An air cool system ensures a constant flow of fresh air to prevent the risk of the motor overheating, when installed in the Rutlands® dust box or in a close-sided router table.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.
Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.
Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
This premium performance Rutlands® router table features the R5008 router table stand, R5007 router table top, R5009 router table fence, R5063 electronic router lift, R5018 router motor, two R5015 double feather boards, R5012 sliding carriage and a pack of two R5067 router bit holders.
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.
Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.
Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with Rutlands® flip stops and on the front face there is another 8.3mm T Track for mounting Rutlands® featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing.
Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.
Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience. An air cool system ensures a constant flow of fresh air to prevent the risk of the motor overheating, when installed in the Rutlands® dust box or in a close-sided router table.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.
Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.
Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.
Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.
Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with Rutlands® flip stops and on the front face there is another 8.3mm T Track for mounting Rutlands® featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing.
Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.
Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience. An air cool system ensures a constant flow of fresh air to prevent the risk of the motor overheating, when installed in the Rutlands® dust box or in a close-sided router table.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.
Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.
Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
Show more +
Specifications
Brand
Rutlands®
R5046
Premium Router Table
Table Top Dimensions
800mm x 600mm
Work Surface Material
High pressure phenolic laminate
Fence Height
90mm
Fence Material
Extruded aluminium
Sub-Fence Height
65mm
Sub-Fence Surface Material
High pressure phenolic laminate
Fence Length
Adjustable from 910mm to 1150mm
Fence Travel
375mm
T Track Widths
19mm and 6.3mm
Overall Length
800mm
Overall Width
600mm
Overall Height
900mm
Dust Port Diameter
63mm
R5018
Premium Router Lift Motor
Voltage
230V
Power Input Rating
2400W
Power Output Rating
1800W
No Load Speed
Between 10,000 and 22,000 rpm
Included Collets
1/2" and 1/4"
Motor Diameter
106mm
Cylindrical Length
130mm
Overall Motor Length
205mm
Power Cable Length
2m
Motor Weight
3.87kg
R5063
Premium Router Lift - R20
Power
230V
Mounting Plate Size
298mm x 235mm x 10mm
Lift Total Height
330mm
Insert Ring Diameter
100mm
Insert Ring Supplied Diameter
50mm
Suits Motor Diameter
104mm to 110mm
Digital Display
Metric and Imperial
Digital Increments
0.1mm or 0.001"
Maximum Travel
75mm
Router Lift Weight
9kg
R5012
Premium Router Table Sliding Carriage
Material
6061 aluminium alloy
Angle of Rotation
90°
Length of Travel
455mm
Carriage Sub-Fence Surface Material
High pressure phenolic laminate
Carriage Sub-Fence Height
75mm
Carriage Sub-Fence Length
300mm
R5015
Premium Double Feather Board
Feather Board Material
High impact moulded plastic
Feather Board Width
130mm
Feather Board Length
Up to 140mm
Feather Board Face Height
13mm
Stacked Face Height
37mm
Track Hardware
Hex bolts for 6.35mm or 8.3mm T track and slot bar for 19mm T track
R5067
Premium Router Bit Holders
Bit Holder Length
550mm
Bit Holder Depth
75mm
Bit Holder Height
80mm
1/4" Capacity
11
1/2" Capacity
24
Show more +
0
5
Customer Reviews
Reviews (0)
Write Review....
£1599.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process