Router Table - R15 Lift and Motor
Router Table - R15 Lift and Motor
£899.99
inc. vat

Key Features

  • Lifetime Warranty
    If any router table or lift fails due to a material or manufacturing defect the component will be replaced free of charge
  • Premium Performance Router Table
    Including R5008 router table stand, R5007 router table top, R5009 router table fence, R5075 router lift and R5018 router motor
  • Premium Router Table Stand
    Box-section steel gives guaranteed strength and rigidity with each foot being fitted with a heavy-duty rubber pad for vibration dampening
  • Premium Router Table Top
    Laminated on both faces with a low friction premium-grade phenolic that prevents moisture absorption. supplied with an aluminium double t track
  • Premium Router Table Fence
    Precision CNC machined aluminium with low friction, phenolic laminate sub-fences
  • Premium Router Lift - R15
    Built with premium quality materials, to an exacting standard and meticulously engineered with router bit height adjustment controlled from above the table
  • Premium Router Lift Motor
    2400W variable speed motor that features a torque control system, soft start technology, air cool system and dust protection system
  • Premium Double Feather Boards
    Allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers
  • Further Information
    More information about any of the components of this table can be found on the individual product pages

Show more +

Bundles

Total: £1,012.47
This Item: Router Table - R15 Lift and Motor
£899.99

Product Details

This premium performance RutlandsŪ router table features the R5008 router table stand, R5007 router table top, R5009 router table fence, R5075 router lift and R5018 router motor.

Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.

Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.

Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with RutlandsŪ flip stops and on the front face there is another 8.3mm T Track for mounting RutlandsŪ featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing. The two fence support brackets are mounted to each side of router table top, allowing the fence to be moved back and forth. An adjustable metric scale on the fence brackets allows you to precisely align, zero and set the position of the fence to the router bit.

Premium Router Lift - R15 R5075
Built with premium quality materials to an exacting standard, the lift has been meticulously engineered to ensure precise, ultra smooth raising and lowering of the router bit. The height adjustment is controlled from above the table by inserting and rotating the removable crank handle, making adjustment fast, simple and extremely precise. The lift positions the router collet above the table surface when fully raised to allow for easy access and quick bit changes. The main drive spindle is precision CNC machined and features a fine pitch thread that allows you to tune-in the height of the router bit to a resolution of 0.025mm. Once the router bit is set to the cutting height, a special spindle-locking mechanism prevents the height setting from changing due to vibration. The carriage of the lift travels on two steel guide posts, that are housed within double-sealed linear bearings to resist dust infiltration resulting in an ultra smooth rise and fall movement, with no side play. To vary the size of the bit aperture the lift is supplied with three polycarbonate flush insert rings with centre holes of 10mm, 32mm and 50mm.

Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience. An air cool system ensures a constant flow of fresh air to prevent the risk of the motor overheating, when installed in the RutlandsŪ dust box or in a close-sided router table. The dust protection system prevents dust from causing damage to the motor to ensure a long trouble-free life and the precision machined spindle bearings are guaranteed for ultra smooth, vibration free rotation.

Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.
This premium performance RutlandsŪ router table features the R5008 router table stand, R5007 router table top, R5009 router table fence, R5075 router lift and R5018 router motor.

Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.

Premium Router Table Top R5007
This table top is laminated on both faces with a low friction, premium-grade, phenolic which is highly wear resistant and allows the workpiece to glide smoothly through the router bit. The 2mm phenolic laminate is sandwiched around a 30mm solid moisture-resistant composite core which prevents the absorption of atmospheric moisture, eliminating the risk of warping or distortion of the table surface when working in cold or damp workshops. Set into the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and featherboards, and a 6.3mm T slot for use with stops and homemade jigs.

Premium Router Table Fence R5009
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish. On the top face of the fence is a metric scale and an 8.3mm T Track for use with RutlandsŪ flip stops and on the front face there is another 8.3mm T Track for mounting RutlandsŪ featherboards and the height adjustable router bit guard. The two sub-fences are made from a solid composite with a low friction, phenolic laminate surface to ensure smooth movement of the workpiece. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planing. The two fence support brackets are mounted to each side of router table top, allowing the fence to be moved back and forth. An adjustable metric scale on the fence brackets allows you to precisely align, zero and set the position of the fence to the router bit.

Premium Router Lift - R15 R5075
Built with premium quality materials to an exacting standard, the lift has been meticulously engineered to ensure precise, ultra smooth raising and lowering of the router bit. The height adjustment is controlled from above the table by inserting and rotating the removable crank handle, making adjustment fast, simple and extremely precise. The lift positions the router collet above the table surface when fully raised to allow for easy access and quick bit changes. The main drive spindle is precision CNC machined and features a fine pitch thread that allows you to tune-in the height of the router bit to a resolution of 0.025mm. Once the router bit is set to the cutting height, a special spindle-locking mechanism prevents the height setting from changing due to vibration. The carriage of the lift travels on two steel guide posts, that are housed within double-sealed linear bearings to resist dust infiltration resulting in an ultra smooth rise and fall movement, with no side play. To vary the size of the bit aperture the lift is supplied with three polycarbonate flush insert rings with centre holes of 10mm, 32mm and 50mm.

Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience. An air cool system ensures a constant flow of fresh air to prevent the risk of the motor overheating, when installed in the RutlandsŪ dust box or in a close-sided router table. The dust protection system prevents dust from causing damage to the motor to ensure a long trouble-free life and the precision machined spindle bearings are guaranteed for ultra smooth, vibration free rotation.

Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.

Show more +

Specifications

Brand RutlandsŪ
R5046 Premium Router Table
Table Top Dimensions 800mm x 600mm
Work Surface Material High pressure phenolic laminate
Fence Height 90mm
Fence Material Extruded aluminium
Sub-Fence Height 65mm
Sub-Fence Surface Material High pressure phenolic laminate
Fence Length Adjustable from 910mm to 1150mm
Fence Travel 375mm
T Track Widths 19mm and 6.3mm
Overall Length 800mm
Overall Width 600mm
Overall Height 900mm
Dust Port Diameter 63mm
R5075 Premium Router Lift - R15
Insert Plate Size 298mm x 235mm
Insert Plate Material Aluminium
Insert Plate Thickness 10mm
Overall Lift Height 300mm
Insert Ring Diameter 90mm
Insert Rings 50mm, 32mm, 10mm
Weight 8kg
Motor Carriage Diameter 106mm
Height Resolution 0.025mm
Router Bit Travel 0 - 60mm
R5018 Premium Router Lift Motor
Voltage 230V
Power Input Rating 2400W
Power Output Rating 1800W
No Load Speed Between 10,000 and 22,000 rpm
Included Collets 1/2" and 1/4"
Motor Diameter 106mm
Cylindrical Length 130mm
Overall Motor Length 205mm
Power Cable Length 2m
Motor Weight 3.87kg

Show more +
5.000 12 5

Customer Reviews

Reviews (12)
Write Review....

John Morris

I have been looking for a router table for a while. This is a high quality table and operates superbly. Excellent quality and value.

Stuart

For the money, a cracking bit of kit.

Robert Bradshaw

All the bits and pieces went together without any problem or reaming out of holes and the result is a very sturdy piece of kit. I have fitted fully locking castors on mine and a no voltage off switch, which is located on the front rail, facilitating a quick emergency switch off. I have also linked an earth wire from the new switch back to the motor casing, as to my surprise, the motor is wired in twin flex, without earth.
I look forward to using my new "toy"; I have every confidence that it will perform well.
Robert.

Paul Withers

Absolutely delighted with this table and lift. I placed a click and collect order last Friday morning at 10am and collected it an hour later. The quality of the lift is exceptional. Two large brass bearings prevent any side play and the lift moves smoothly up and down and automatically locks off when you reach your working height. I routed a rebate on 8 metres of tulip wood and the cutting depth remained consistent all the way. The motor is a beast yet so much quieter than my Elu brush motor router. The top is true and large enough to support oversize workpieces. The legs weigh a ton to keep the table rock steady. I genuinely struggle to find an issue - it is exceptional. Need to order some feather boards and a NVR switch now.

Mark Chisholm

The router motor is a gem. The blurb says it is heavy and very smooth and to be honest I took that with a pinch of salt as I figured that the price would reduce the standard. How wrong I was. It is seriously smooth and vibration free. I have two professional Hitachi 1/2" routers and they are not as quiet and vibration free as this Xact router. I was quite surprised to be honest about that.

M McCaffrey

Just finished assembly of the R15 Router Lift and Motor. Overall my first impressions are very positive. Build quality appears very good.
Lift was delivered in very sturdy packaging. After about 20 minutes i had the router and lift dropped into my router table. I particularly like that they included a flush trim bit to help build your own router table for this lift to drop into.
I am unable to speak to how this lift and motor will hold up over time but my initial few few cuts with the machine were very smooth.
I only have 2 small gripes about this lift and motor. The first is that the zero clearance insert rings are pressed into the plate instead of attached via a bayonet fitting. This means that you will need to reach underneath the table to change out the insert ring. This is only a minor inconvenience but you may want to factor this in if you are building your own table.
Secondly, and this is even a smaller gripe but i would prefer if the router motor wasn't all black. As the speed control is on the head of the motor it can be hard to find if enclosed in a cabinet below your table. I may end up painting the speed control dial to make it easier to locate.
I don't think either of the above issues warrants removal of a star. This is definitely the best router lift i have ever owned

Paul Jenkinson

I am absolutely delighted with this new router table. The top is precise and level, the insert plate can be adjusted so it sits flush and the fence is a dream to slide back and forth. I made the mistake a couple of years ago of buying a similar size table of EBay that was 1/3rd of the price of this Rutlands one. I had nothing but issues with it - warped top, chipped edged around the insert plate and a fence that resembled a banana. You get what you pay for and I highly recommend this to any serious woodworker. When you are routing to make fine joints you need precision and this is what you get 10 out of 10. My advice like the other reviewer is to set up the stand with the bolts loose add then add the top before fully tightening the bolts. Routing just got better.

Glenn Newton

This is just great quality for the cost ! Its solid, nicely finished, and comes as a nice complete package. I didnt use the supplied legs but instead mounted mine to a kitchen cabinet carcass for a boxed in solution to dust control. Couldnt be happier, and you will be too if you choose to buy one.

Anthony Berryman

This is the best value piece of woodworking kit I've come across. The frame is very solid and well up to the job. The top is rigid and accurately machined...the fence moves easily etc. The insert also is very rigid and easily removable. Great product...really impressed.

Dan

Game changer. Love this should have bought one sooner. Easy to assemble, everything you could need in a table router. Well build, sturdy and precise. The lift is superb and smooth, the router motor is powerful and can cleanly cut end grain. The optional feather boards are well worth the money.

James Porter

I spent a lot of time comparing tables from different brands, this offering appealed to me as an all in one solution containing the router table, router lift and router motor. I also had confidence in the Rutlands brand from previous purchases of a dovetail jig and several router bits. The table is very well made, with the fence and top being especially impressive. The lift is smooth operating and the height of the router bit is easily adjusted from above the table. The motor has plenty of power. Very much recommend it.

Mark Jennings

Superbly built. Relatively easy to assemble. Very sturdy and stable to use. Great pleasure!!. On/Off switch slightly fiddly.

Show more +

Router Table - R15 Lift and Motor

RutlandsŪ
Part No. R5079
£899.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >