Premium Phenolic Router Table GTS - with Insert Plate
Premium Phenolic Router Table GTS - with Insert Plate
£1099.99
inc. vat

Key Features

  • Lifetime Warranty
    If any part fails due to a material or manufacturing defect the component will be replaced free of charge
  • Premium Performance Router Table Package
    Including solid phenolic table top, table stand, phenolic fence, insert plate, two double feather boards, sliding carriage and two router bit holders
  • Premium Router Table Stand
    Box-section steel gives guaranteed strength and rigidity with each foot being fitted with a heavy-duty rubber pad for vibration dampening
  • Premium Phenolic Router Table Top
    Made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops
  • Premium Phenolic Router Table Fence
    Precision CNC machined from aircraft-grade aluminium with solid phenolic sub-fences
  • Premium Router Table Aluminium Insert Plate
    Made from 10mm anodized aluminium and is extremely strong, perfectly flat and features an abrasion resistant finish
  • Premium Sliding Carriage
    Engineered for precision to achieve superior end grain cuts compared to traditional track mounted mitre gauges
  • Premium Double Feather Boards
    Allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers
  • Premium Router Bit Holders
    Perfect solution to organise and store your router bits
  • Further Information
    More information about any of the components of this table can be found on the individual product pages

Show more +

Bundles

Total: £1,189.97
This Item: Premium Phenolic Router Table GTS - with Insert Plate
£1,099.99
Total: £1,169.98
This Item: Premium Phenolic Router Table GTS - with Insert Plate
£1,099.99

Product Details

This premium performance Rutlands® router table features the R5008 router table stand, R5134 phenolic router table top, R5137 phenolic router table fence, R5010 insert plate, two R5015 double feather boards, R5012 sliding carriage and a pack of two R5067 router bit holders.

Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.

Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.

Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning. . The two fence support brackets are mounted to each side of router table top, allowing the fence to be moved back and forth. An adjustable metric scale on the fence brackets allows you to precisely align, zero and set the position of the fence to the router bit.

Premium Router Table Aluminium Insert Plate R5010
This router table insert plate is made from 10mm anodized aluminium and is extremely strong, perfectly flat and features an abrasion resistant finish. The plate is compatible with all plunge routers with a maximum base diameter of 200mm. An 90mm aperture accommodates large router bits, whilst the two polycarbonate click-fit insert rings of 50mm and 35mm are used with smaller diameter bits. To mount a router, you use the router's sub-base as a template to drill the plate, having positioned the set-up ring and centering pin to ensure your router is centrally mounted. A series of fine-thread adjustment screws allow you to level the plate perfectly flush with the table. The insert plate is supplied with a top mounted guide pin, featuring a free-spinning plastic barrel to enables free hand and pattern shape routing.

Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.

Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.

Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
This premium performance Rutlands® router table features the R5008 router table stand, R5134 phenolic router table top, R5137 phenolic router table fence, R5010 insert plate, two R5015 double feather boards, R5012 sliding carriage and a pack of two R5067 router bit holders.

Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.

Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.

Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning. . The two fence support brackets are mounted to each side of router table top, allowing the fence to be moved back and forth. An adjustable metric scale on the fence brackets allows you to precisely align, zero and set the position of the fence to the router bit.

Premium Router Table Aluminium Insert Plate R5010
This router table insert plate is made from 10mm anodized aluminium and is extremely strong, perfectly flat and features an abrasion resistant finish. The plate is compatible with all plunge routers with a maximum base diameter of 200mm. An 90mm aperture accommodates large router bits, whilst the two polycarbonate click-fit insert rings of 50mm and 35mm are used with smaller diameter bits. To mount a router, you use the router's sub-base as a template to drill the plate, having positioned the set-up ring and centering pin to ensure your router is centrally mounted. A series of fine-thread adjustment screws allow you to level the plate perfectly flush with the table. The insert plate is supplied with a top mounted guide pin, featuring a free-spinning plastic barrel to enables free hand and pattern shape routing.

Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.

Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.

Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©

Show more +

Specifications

Brand Rutlands®
R5134 Phenolic Table Top
Tabletop Work Surface Material Solid Phenolic
Overall Length 800mm
Overall Width 600mm
Overall Thickness 30mm
Table Top Insert Plate Opening 298x235mm
T Track Widths 19mm and 6.3mm
T Track Material Extruded aluminium
R5008 Premium Router Table Stand
Table Stand Material 38mm box section steel
Table Stand Length 660mm
Table Stand Width 560mm
Table Stand Height 870mm
R5137 Phenolic Fence
Fence Material Extruded aluminium
Sub-Fence Surface Material Solid phenolic
Overall Height 90mm
Sub-Fence Height 65mm
Fence Length Adjustable from 910mm to 1150mm
Fence Opening Adjustable from 15mm to 115mm
Fence T Track Material Extruded aluminium
Fence T Track Widths 19mm and 8.3mm
Dust Port Diameter 63mm
R5010 Premium Aluminium Router Insert Plate
Insert Plate Material Aluminium
Insert Plate Length 298mm
Insert Plate Width 235mm
Insert Plate Thickness 10mm
Maximum Router Base Diameter 200mm
Insert Plate Opening 90mm
Insert Ring Openings 50mm and 35mm
R5012 Premium Router Sliding Carriage
Carriage Material 6061 aluminium alloy
Angle of Rotation 90°
Length of Travel 455mm
Carriage Sub-Fence Surface Material High pressure phenolic laminate
Carriage Sub-Fence Height 75mm
Carriage Sub-Fence Length 300mm
R5015 Premium Double Feather Board
Feather Board Material High impact moulded plastic
Feather Board Width 130mm
Feather Board Length Up to 140mm
Feather Board Face Height 13mm
Stacked Face Height 37mm
Track Hardware Hex bolts for 6.35mm or 8.3mm T track and slot bar for 19mm T track
R5067 Premium Router Bit Holders
Length 550mm
Depth 75mm
Height 80mm
1/4" Capacity 11
1/2" Capacity 24

Show more +
0 5

Customer Reviews

Reviews (0)
Write Review....

Show more +

Premium Phenolic Router Table GTS - with Insert Plate

Rutlands®
Part No. R5238
£1099.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >