Premium Phenolic Router Table GTS - with R20 Electronic Lift and Motor
Premium Phenolic Router Table GTS - with R20 Electronic Lift and Motor
£1799.99
inc. vat
Home > Routing > Router Tables & Lifts > Router Tables > Solid Phenolic Router Tables > Solid Phenolic Router Tables - GTS > Premium Phenolic Router Table GTS - with R20 Electronic Lift and Motor

Key Features

  • Lifetime Warranty
    If any part fails due to a material or manufacturing defect the component will be replaced free of charge
  • Premium Performance Router Table Package
    Including solid phenolic table top, table stand, phenolic fence, electronic router lift, motor, two double feather boards, sliding carriage and two router bit holders
  • Premium Router Table Stand
    Box-section steel gives guaranteed strength and rigidity with each foot being fitted with a heavy-duty rubber pad for vibration dampening
  • Premium Phenolic Router Table Top
    Made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops
  • Premium Phenolic Router Table Fence
    Precision CNC machined from aircraft-grade aluminium with solid phenolic sub-fences
  • Premium Router Lift Motor
    2400W variable speed motor that features a torque control system, soft start technology, air cool system and dust protection system
  • Premium Electronic Router Lift - R20
    Significantly reduces set up time and ensures pin point accuracy when table routing with rise and fall operated by a digital control box with an LED display
  • Premium Sliding Carriage
    Engineered for precision to achieve superior end grain cuts compared to traditional track mounted mitre gauges
  • Premium Double Feather Boards
    Allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers
  • Premium Router Bit Holders
    Perfect solution to organise and store your router bits
  • Further Information
    More information about any of the components of this table can be found on the individual product pages

Show more +

Bundles

Total: £1,889.97
This Item: Premium Phenolic Router Table GTS - with R20 Electronic Lift and Motor
£1,799.99
Total: £1,869.98
This Item: Premium Phenolic Router Table GTS - with R20 Electronic Lift and Motor
£1,799.99

Product Details

This premium performance Rutlands® router table features the R5008 router table stand, R5134 phenolic router table top, R5137 phenolic router table fence, R5063 electronic router lift, R5018 router lift motor, two R5015 double feather boards, R5012 sliding carriage and a pack of two R5067 router bit holders.

Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.

Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.

Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning.

Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.

Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience.

Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.©

Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.

Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©
This premium performance Rutlands® router table features the R5008 router table stand, R5134 phenolic router table top, R5137 phenolic router table fence, R5063 electronic router lift, R5018 router lift motor, two R5015 double feather boards, R5012 sliding carriage and a pack of two R5067 router bit holders.

Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.

Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.

Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning.

Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.

Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience.

Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.©

Premium Router Table Sliding Carriage R5012
This premium router table sliding carriage takes the concept of traditional mitre gauges to the next level, giving you a higher level of accuracy when coping and cross-cutting end grain, producing tighter fitting joints.

Premium Router Bit Holders R5067
These premium router bit holders are the perfect solution to organise and store your router bits. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.©

Show more +

Specifications

Brand Rutlands®
R5134 Phenolic Table Top
Table Top Work Surface Material Solid phenolic
Overall Length 800mm
Overall Width 600mm
Overall Thickness 30mm
Insert Plate Opening 298x235mm
Table Top T Track Widths 19mm and 6.3mm
Table Top T Track Material Extruded aluminium
R5008 Premium Router Table Stand
Table Stand Material 38mm box section steel
Table Stand Length 660mm
Table Stand Width 560mm
Table Stand Height 870mm
R5137 Phenolic Table Fence
Fence Material Extruded aluminium
Sub-Fence Surface Material Solid phenolic
Overall Height 90mm
Sub-Fence Height 65mm
Length Adjustable from 910mm to 1150mm
Fence Opening Adjustable from 15mm to 115mm
Fence T Track Material Extruded aluminium
Fence T Track Widths 19mm and 8.3mm
Dust Port Diameter 63mm
R5018 Premium Router Lift Motor
Voltage 230V
Power Input Rating 2400W
Power Output Rating 1800W
No Load Speed Between 10,000 and 22,000 rpm
Included Collets 1/2" and 1/4"
Motor Diameter 106mm
Cylindrical Length 130mm
Motor Overall Length 205mm
Power Cable Length 2m
Motor Weight 3.87kg
R5063 Premium Electronic Router Lift - R20
Router Lift Voltage 230V
Mounting Plate Size 298mm x 235mm x 10mm
Lift Total Height 330mm
Insert Ring Diameter 100mm
Insert Ring Supplied Diameter 50mm
Suits Motor Diameter 104mm to 110mm
Digital Display Metric and Imperial
Digital Increments 0.1mm or 0.001"
Maximum Travel 75mm
Router Lift Weight 9kg
R5138 Phenolic Sliding Carriage
Carriage Material 6061 aluminium alloy
Angle of Rotation 90°
Length of Travel 455mm
Carriage Sub-Fence Surface Material Solid phenolic
Carriage Sub-Fence Height 75mm
Carriage Sub-Fence Length 300mm
R5015 Premium Double Feather Board
Feather Board Material High impact moulded plastic
Feather Board Width 130mm
Feather Board Length Up to 140mm
Feather Board Face Height 13mm
Stacked Face Height 37mm
Track Hardware Hex bolts for 6.35mm or 8.3mm T track and slot bar for 19mm T track
R5067 Premium Router Bit Holder
Bit Holder Length 550mm
Bit Holder Depth 75mm
Bit Holder Height 80mm
1/4" Capacity 11
1/2" Capacity 24

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

John Seftonal

The electronic lift makes height control so simple. You lower your router bit to be flush to the table surface, press the zero setting on the control box and then tap in the depth of cut you require. The bit raises to the correct height with no fiddly height gauges to content with. The sliding carriage ensures that you are always cutting at 90 degrees or and other angle you desire and can be flipped over the fence when not required - no tools needed. The build quality of the table is excellent. First class.

Show more +

Premium Phenolic Router Table GTS - with R20 Electronic Lift and Motor

Rutlands®
Part No. R5228
£1799.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >