Phenolic Router Table - R20 Electronic Lift and Motor
£1399.99
inc. vat
Home > Routing > Router Tables & Lifts > Router Tables > Solid Phenolic Router Tables > Solid Phenolic Router Tables > Phenolic Router Table - R20 Electronic Lift and Motor
Key Features
- Lifetime Warranty
If any part fails due to a material or manufacturing defect the component will be replaced free of charge - Premium Performance Router Table Package
Including solid phenolic table top, table stand, phenolic fence, electronic router lift, motor and two double feather boards - Premium Router Table Stand
Box-section steel gives guaranteed strength and rigidity with each foot being fitted with a heavy-duty rubber pad for vibration dampening - Premium Phenolic Router Table Top
Made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops - Premium Phenolic Router Table Fence
Precision CNC machined from aircraft-grade aluminium with solid phenolic sub-fences - Premium Router Lift Motor
2400W variable speed motor that features a torque control system, soft start technology, air cool system and dust protection system - Premium Electronic Router Lift - R20
Significantly reduces set up time and ensures pin point accuracy when table routing with rise and fall operated by a digital control box with an LED display - Premium Double Feather Boards
Allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers - Further Information
More information about any of the components of this table can be found on the individual product pages
Bundles
This Item: Phenolic Router Table - R20 Electronic Lift and Motor
£1,399.99
This Item: Phenolic Router Table - R20 Electronic Lift and Motor
£1,399.99
Product Details
This premium performance Rutlands® router table features the R5008 router table stand, R5134 phenolic router table top, R5137 phenolic router table fence, R5063 electronic router lift, R5018 router lift motor and two R5015 double feather boards..
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.
Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.
Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning.
Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.
Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.©
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.
Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.
Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning.
Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.
Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.©
This premium performance Rutlands® router table features the R5008 router table stand, R5134 phenolic router table top, R5137 phenolic router table fence, R5063 electronic router lift, R5018 router lift motor and two R5015 double feather boards..
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.
Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.
Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning.
Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.
Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.©
Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings.
Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.
Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning.
Premium Electronic Router Lift - R20 R5063
This electronic router lift significantly reduces set up time and ensures pin point accuracy when table routing. The rise and fall is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments. There are two operating modes, the first method is by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height. The lift will automatically lock in position after setting the cutting height, eliminating the risk of unwanted travel during routing. The carriage and threaded arms of the lift are CNC machined and feature sealed-for-life bearings to allow for smooth movement of the router motor.
Premium Router Lift Motor R5018
This powerful, 2400w variable speed motor features a torque control system that prevents the motor from slowing under load, ensuring that the rotational speed remains constant, no matter what diameter of router bit you are using or how hard the wood, resulting in a superior workpiece finish. A variable speed control dial, conveniently positioned on the bottom of the motor for easy-reach, allows you to select speeds from 10,000 to 22,000 rpm. With soft start technology, the router motor gradually increases the speed from zero to the desired level for a safer, more enjoyable routing experience.
Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.©
Show more +
Specifications
Brand
Rutlands®
R5134
Phenolic Table Top
Table Top Work Surface Material
Solid phenolic
Overall Length
800mm
Overall Width
600mm
Overall Thickness
30mm
Insert Plate Opening
298x235mm
Table Top T Track Widths
19mm and 6.3mm
Table Top T Track Material
Extruded aluminium
R5008
Premium Router Table Stand
Table Stand Material
38mm box section steel
Table Stand Length
660mm
Table Stand Width
560mm
Table Stand Height
870mm
R5137
Phenolic Table Fence
Fence Material
Extruded aluminium
Sub-Fence Surface Material
Solid phenolic
Overall Height
90mm
Sub-Fence Height
65mm
Fence Length
Adjustable from 910mm to 1150mm
Fence Opening
Adjustable from 15mm to 115mm
T Track Material
Extruded aluminium
T Track Widths
19mm and 8.3mm
Dust Port Diameter
63mm
R5018
Premium Router Lift Motor
Voltage
230V
Power Input Rating
2400W
Power Output Rating
1800W
No Load Speed
Between 10,000 and 22,000 rpm
Included Collets
1/2" and 1/4"
Motor Diameter
106mm
Cylindrical Length
130mm
Motor Overall Length
205mm
Power Cable Length
2m
Motor Weight
3.87kg
R5063
Premium Electronic Router Lift - R20
Router Lift Voltage
230V
Mounting Plate Size
298mm x 235mm x 10mm
Lift Total Height
330mm
Insert Ring Diameter
100mm
Insert Ring Supplied Diameter
50mm
Suits Motor Diameter
104mm to 110mm
Digital Display
Metric and Imperial
Digital Increments
0.1mm or 0.001"
Maximum Travel
75mm
Router Lift Weight
9kg
R5015
Premium Double Feather Board
Feather Board Material
High impact moulded plastic
Feather Board Width
130mm
Feather Board Length
Up to 140mm
Feather Board Face Height
13mm
Stacked Face Height
37mm
Track Hardware
Hex bolts for 6.35mm or 8.3mm T track and slot bar for 19mm T track
Show more +
5.000
1
5
Customer Reviews
Reviews (1)
Write Review....
Paul Rebbot
Arrived less than 24 hours from placing my order, with each module coming in its own well packaged outer box. Set up took less than two hours with the stand taking the longest, simply due to the number of fixings. The overall quality is exceptional and each component is very well finished. The electronic lift is simple to operate and requires no more than pressing a key pad screen. The collet protrudes the surface of the table to allow you to easily change bits from above. The motor is a beast and hasn't slowed down no matter what size of bit I've used. I've connected to a shop vac at the moment but I'm going to make a dust box from MDF to sit underneath the table an then connect to a proper dust extractor. Could not be more pleased and would recommend to any serious woodworker. Woodworking has just got more fun.
Show more +
£1399.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process