Premium Phenolic Router Table with R5 Plunge Lift
Premium Phenolic Router Table with R5 Plunge Lift
£899.99
inc. vat

Key Features

  • Lifetime Warranty
    If any part fails due to a material or manufacturing defect the component will be replaced free of charge
  • Premium Performance Router Table Package
    Including solid phenolic table top, table stand, phenolic fence, plunge router lift and two double feather boards
  • Premium Router Table Stand
    Box-section steel gives guaranteed strength and rigidity with each foot being fitted with a heavy-duty rubber pad for vibration dampening
  • Premium Phenolic Router Table Top
    Made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops
  • Premium Phenolic Router Table Fence
    Precision CNC machined from aircraft-grade aluminium with solid phenolic sub-fences
  • Premium Plunge Router Lift - R5
    Designed for use with plunge routers and has been meticulously engineered to ensure precise, ultra smooth raising and lowering of the router bit from above the table
  • Premium Double Feather Boards
    Allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers
  • Further Information
    More information about any of the components of this table can be found on the individual product pages

Show more +

Bundles

Total: £989.97
This Item: Premium Phenolic Router Table with R5 Plunge Lift
£899.99
Total: £969.98
This Item: Premium Phenolic Router Table with R5 Plunge Lift
£899.99

Product Details

This premium performance Rutlands® router table features the R5008 router table stand, R5134 phenolic router table top, R5137 phenolic router table fence, R5131 plunge router lift and two R5015 double feather boards.

Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.

Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.

Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning.

Premium Plunge Router Lift - R5 R5131
This premium router lift is designed for use with plunge routers and has been meticulously engineered to ensure precise, ultra smooth raising and lowering of the router bit from above the table. The height adjustment is controlled by inserting and rotating a crank handle, making adjustment fast, simple and extremely precise. The main drive spindle is precision machined with a fine-pitch metric thread that allows you to tune-in the height of the router bit to a resolution of 0.025mm, with one full revolution giving 2mm of movement. To lock off the height you simply insert the handle into the locking mechanism hole and rotate clockwise. The carriage of the lift travels on three steel guide posts, that are housed within sealed linear bearings to resist dust infiltration resulting in an ultra smooth rise and fall movement, with no side play. To mount your router, simply remove the router's sub-base and use it as a template to align and drill the 185mm diameter aluminium mounting plate. The insert plate is made from 10mm anodized aluminium which has an abrasion resistant finish and features a levelling system to ensure a flush fit to the table surface. The insert plate has a 90mm aperture and is supplied with two polycarbonate flush insert rings with centre holes of 50mm and 35mm.

Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.©
This premium performance Rutlands® router table features the R5008 router table stand, R5134 phenolic router table top, R5137 phenolic router table fence, R5131 plunge router lift and two R5015 double feather boards.

Premium Router Table Stand R5008
The legs and braces on this router table stand are made from 38mm wide x 2mm thick box-section steel for guaranteed strength and rigidity. The stand has been specifically designed to ensure that the legs and braces fit perfectly square to each other, via a series of pre-welded locking nuts and stainless-steel fixings. The feet have a large 45mm diameter footprint for optimum stability and have fine height adjustment when levelling on uneven workshop floors. Each foot is fitted with a heavy-duty rubber pad to offer excellent vibration dampening.

Premium Phenolic Router Table Top R5134
This table top is made from a 19mm premium-grade, low friction, solid phenolic that is extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat resulting in a table top that is exceptionally accurate, flat and level. The 800mm wide by 600mm deep table ensures excellent support and stability when routing large and long workpieces. Set flush in the top is an extruded aluminium, double T track which includes a standard 19mm track for use with mitre gauges and feather boards, and a 6.3mm T slot for use with stops and home made jigs.

Premium Phenolic Router Table Fence R5137
This router table fence is precision CNC machined from aircraft-grade aluminium with a black anodized finish and features two solid phenolic sub-fences . Made from a 19mm premium-grade, low friction, solid phenolic the sub-fences are extremely strong, hard wearing, scratch resistant and waterproof, eliminating the risk of warping or distortion when working in cold or damp workshops. Phenolic is produced under extreme high pressure and heat, resulting in fences that are exceptionally accurate, flat and level. The fences can be adjusted, tool free, to accommodate any router bit from 10mm to 115mm in diameter and the outfeed sub-fence can be off-set to allow for edge planning.

Premium Plunge Router Lift - R5 R5131
This premium router lift is designed for use with plunge routers and has been meticulously engineered to ensure precise, ultra smooth raising and lowering of the router bit from above the table. The height adjustment is controlled by inserting and rotating a crank handle, making adjustment fast, simple and extremely precise. The main drive spindle is precision machined with a fine-pitch metric thread that allows you to tune-in the height of the router bit to a resolution of 0.025mm, with one full revolution giving 2mm of movement. To lock off the height you simply insert the handle into the locking mechanism hole and rotate clockwise. The carriage of the lift travels on three steel guide posts, that are housed within sealed linear bearings to resist dust infiltration resulting in an ultra smooth rise and fall movement, with no side play. To mount your router, simply remove the router's sub-base and use it as a template to align and drill the 185mm diameter aluminium mounting plate. The insert plate is made from 10mm anodized aluminium which has an abrasion resistant finish and features a levelling system to ensure a flush fit to the table surface. The insert plate has a 90mm aperture and is supplied with two polycarbonate flush insert rings with centre holes of 50mm and 35mm.

Premium Double Feather Board R5015
These feather boards are an essential tool and provide even, consistent pressure on your workpiece up against the fence. They allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.©

Show more +

Specifications

Brand Rutlands®
R5134 Phenolic Table Top
Table Top Work Surface Material Solid phenolic
Overall Length 800mm
Overall Width 600mm
Overall Thickness 30mm
Insert Plate Opening 298x235mm
Table Top T Track Widths 19mm and 6.3mm
Table Top T Track Material Extruded aluminium
R5008 Premium Router Table Stand
Table Stand Material 38mm box section steel
Table Stand Length 660mm
Table Stand Width 560mm
Table Stand Height 870mm
R5137 Phenolic Table Fence
Fence Material Extruded aluminium
Sub-Fence Surface Material Solid phenolic
Overall Height 90mm
Sub-Fence Height 65mm
Length Adjustable from 910mm to 1150mm
Fence Opening Adjustable from 15mm to 115mm
Fence T Track Material Extruded aluminium
Fence T Track Widths 19mm and 8.3mm
Dust Port Diameter 63mm
R5131 Plunge Lift - R5
Insert Plate Size 298mm x 235mm
Insert Plate Material Aluminium
Insert Plate Thickness 10mm
Overall Lift Height 300mm
Insert Plate Aperture 90mm
Insert Rings 50mm, 35mm
Height Resolution 0.025mm
Height Change After One Revolution 2mm
R5015 Premium Double Feather Board
Feather Board Material High impact moulded plastic
Feather Board Width 130mm
Feather Board Length Up to 140mm
Feather Board Face Height 13mm
Stacked Face Height 37mm
Track Hardware Hex bolts for 6.35mm or 8.3mm T track and slot bar for 19mm T track

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

Don Marshall

I have mounted a Hitachi 1/2" router to this table. Fitting the router was straight forward - I removed the plastic base from the bottom of the router and used it as a template to drill the mounting plate on the lift. The overall quality of the router table is superb and it genuinely makes you want to carry out more challenging projects. The legs take some tome to assemble, especially if like me you don't read the instructions and have to set up all over again. I solid phenolic top is really wide and gives excellent support when routing long pieces of wood. 5 out of 5 from me.

Show more +

Premium Phenolic Router Table with R5 Plunge Lift

Rutlands®
Part No. R5223
£899.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >