Japanese Ryoba Universal Saw - 240mm - Power Grip
£34.99
inc. vat
Key Features
- Lifetime Warranty
If a saw should fail due to a material or manufacturing defect it will be replaced free of charge - Made Exclusively for Rutlands® by Gyokucho
World's leading Japanese saw manufacturer - Ryoba is the Most Versatile Saw for Cabinetmaking and Joinery
Two different tooth patterns for both crosscut and rip work - Trapezoidal Teeth
For cutting across and diagonal to the grain - Progressively Finer Triangular Rip Teeth
Makes starting the cut easier and uses less force as the stroke progresses - Cut on the Pull Stroke rather than Push Stroke
Allows the blade to be thinner for a much smoother and faster cut - Narrow Kerf
Saw removes less material and requires less energy for a super-fine, tear free cut - Impulse Hardened Teeth
Superior sharpness and stay sharper for longer - Symmetrically Set Teeth
Straight, drift free sawing - Electronically Surface Plated
To minimise friction and prevent resin build up and corrosion
Bundles
This Item: Japanese Ryoba Universal Saw - 240mm - Power Grip
£34.99
Product Details
Japanese Saws
Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.
Ryoba
The Ryoba is the most versatile Japanese saw for cabinetmaking and joinery as the blade has two different tooth patterns to allow for both crosscut and rip work. This Ryoba has a 240mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain on one side and triangular teeth for ripping along the grain on the opposite side. The trapezoidal teeth are sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The triangular rip teeth become progressively finer from tip to tang to make starting the cut easier and to use less force as the stroke progresses. Ryoba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces in hardwood, softwood and particle board.
Power Grip Handle
The blade is mounted on a handle made from TPE which is very robust and resilient material and features a hatched grip that is both slip-proof and extremely comfortable to hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.
Ryoba
The Ryoba is the most versatile Japanese saw for cabinetmaking and joinery as the blade has two different tooth patterns to allow for both crosscut and rip work. This Ryoba has a 240mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain on one side and triangular teeth for ripping along the grain on the opposite side. The trapezoidal teeth are sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The triangular rip teeth become progressively finer from tip to tang to make starting the cut easier and to use less force as the stroke progresses. Ryoba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces in hardwood, softwood and particle board.
Power Grip Handle
The blade is mounted on a handle made from TPE which is very robust and resilient material and features a hatched grip that is both slip-proof and extremely comfortable to hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Japanese Saws
Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.
Ryoba
The Ryoba is the most versatile Japanese saw for cabinetmaking and joinery as the blade has two different tooth patterns to allow for both crosscut and rip work. This Ryoba has a 240mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain on one side and triangular teeth for ripping along the grain on the opposite side. The trapezoidal teeth are sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The triangular rip teeth become progressively finer from tip to tang to make starting the cut easier and to use less force as the stroke progresses. Ryoba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces in hardwood, softwood and particle board.
Power Grip Handle
The blade is mounted on a handle made from TPE which is very robust and resilient material and features a hatched grip that is both slip-proof and extremely comfortable to hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.
Ryoba
The Ryoba is the most versatile Japanese saw for cabinetmaking and joinery as the blade has two different tooth patterns to allow for both crosscut and rip work. This Ryoba has a 240mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain on one side and triangular teeth for ripping along the grain on the opposite side. The trapezoidal teeth are sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The triangular rip teeth become progressively finer from tip to tang to make starting the cut easier and to use less force as the stroke progresses. Ryoba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces in hardwood, softwood and particle board.
Power Grip Handle
The blade is mounted on a handle made from TPE which is very robust and resilient material and features a hatched grip that is both slip-proof and extremely comfortable to hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Tooth Type
Crosscut & Rip
Blade Length
240mm
Overall Length
550mm
Blade Thickness
0.6mm
Tooth Pitch Crosscut
1.3mm
Tooth Pitch Rip
2.4mm-3.8mm
Show more +
5.000
3
5
Customer Reviews
Reviews (3)
Write Review....
Levi Martin
Awesome product. Very sharp. Zips through material like no tomorrow. Will be definitely buying from here again
Damian Miles
I've used Japanese saws for years and have had various experiences with them, some good some bad.
The grip on this saw allows for longer periods of use with less fatigue. It's also comfortable and easy to grip when covered in dust. It's a well balanced saw that makes it easy to use.
The crosscut side is amazing. I work mostly in Oak and it goes through leaving an almost planed finish. The set on these teeth is minimal meaning I've been able to use it as a flush cut saw with good results. The rip side isn't quite as good as the crosscut (but the crosscut is exceptional), but it should be much better with softer woods.
It's a great saw that is very versatile. I love the fact you can replace the blade if needed as I am trying to reduce waste in the workshop. My only regret is that I didn't buy the set of three and save some money.
Very highly recommended as a good all round saw.
The grip on this saw allows for longer periods of use with less fatigue. It's also comfortable and easy to grip when covered in dust. It's a well balanced saw that makes it easy to use.
The crosscut side is amazing. I work mostly in Oak and it goes through leaving an almost planed finish. The set on these teeth is minimal meaning I've been able to use it as a flush cut saw with good results. The rip side isn't quite as good as the crosscut (but the crosscut is exceptional), but it should be much better with softer woods.
It's a great saw that is very versatile. I love the fact you can replace the blade if needed as I am trying to reduce waste in the workshop. My only regret is that I didn't buy the set of three and save some money.
Very highly recommended as a good all round saw.
Chris Holister
Extremely sharp and great size saw. Fast delivery and good service as always.
Show more +
£34.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process