Japanese Saws - 240mm - Rattan - Set of 3
Japanese Saws - 240mm - Rattan - Set of 3
£99.99
inc. vat
Home > Sawing > Japanese Saws > Sets of Saws > Japanese Saws - 240mm - Rattan - Set of 3

Key Features

  • Lifetime Warranty
    If a saw should fail due to a material or manufacturing defect it will be replaced free of charge
  • Made Exclusively for Rutlands by Gyokucho
    World's leading Japanese saw manufacturer
  • Dozuki Saw
    For fine dovetail joints and precise shoulder and crosscuts
  • Kataba Saw
    For deep cuts flush to the surface and long cuts on large workpieces
  • Ryoba Saw
    Two different tooth patterns for both crosscut and rip work
  • Cut on the Pull Stroke rather than Push Stroke
    Allows the blade to be thinner for a much smoother and faster cut
  • Narrow Kerf
    Saw removes less material and requires less energy for a super-fine, tear free cut
  • Impulse Hardened Teeth
    Superior sharpness and stay sharper for longer
  • Symmetrically Set Teeth
    Straight, drift free sawing
  • Electronically Surface Plated
    To minimise friction and prevent resin build up and corrosion

Show more +

Bundles

Total: £139.97
This Item: Japanese Saws - 240mm - Rattan - Set of 3
£99.99

Product Details

This set features the three most popular rattan handle Japanese saws, Dozuki (R1000), Kataba (R1003) and Ryoba (R1006).

Japanese Saws
Made exclusively for Rutlands by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.

Dozuki
This Dozuki saw features ultra-thin, universal teeth for sawing across, along and diagonally to the grain. Due to the finest of kerfs, Dozuki saws are indispensable for cutting dovetails and other fine joints and for making precise shoulder and crosscuts. The universal tooth pattern allows for the rip-cut of pins and the crosscut of side pins when making dovetails in both hard and soft wood. A reinforced back stabilises the 0.3mm ultra-thin, 240mm long blade to ensure backlash free saw blade guidance for straight, chatter free performance.

Kataba
Kataba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces. This Kataba has a 240mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain. Each tooth is sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The tooth geometry is excellent at clearing the kerf to prevent clogging. With its wear resistant, super hard teeth this Kataba saw will perform trimming, shoulder and flush cuts in hardwoods, exotic and tropical hardwoods, soft woods, particle boards and glued woods.

Ryoba
The Ryoba is the most versatile Japanese saw for cabinetmaking and joinery as the blade has two different tooth patterns to allow for both crosscut and rip work. This Ryoba has a 240mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain on one side and triangular teeth for ripping along the grain on the opposite side. The trapezoidal teeth are sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The triangular rip teeth become progressively finer from tip to tang to make starting the cut easier and to use less force as the stroke progresses. Ryoba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces in hardwood, softwood and particle board.

Rattan Handle
Traditional in style, the blade is mounted on a lightweight wooden handle for fatigue free working and is wrapped in rattan for excellent comfort, breathability and hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge.
This set features the three most popular rattan handle Japanese saws, Dozuki (R1000), Kataba (R1003) and Ryoba (R1006).

Japanese Saws
Made exclusively for Rutlands by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.

Dozuki
This Dozuki saw features ultra-thin, universal teeth for sawing across, along and diagonally to the grain. Due to the finest of kerfs, Dozuki saws are indispensable for cutting dovetails and other fine joints and for making precise shoulder and crosscuts. The universal tooth pattern allows for the rip-cut of pins and the crosscut of side pins when making dovetails in both hard and soft wood. A reinforced back stabilises the 0.3mm ultra-thin, 240mm long blade to ensure backlash free saw blade guidance for straight, chatter free performance.

Kataba
Kataba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces. This Kataba has a 240mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain. Each tooth is sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The tooth geometry is excellent at clearing the kerf to prevent clogging. With its wear resistant, super hard teeth this Kataba saw will perform trimming, shoulder and flush cuts in hardwoods, exotic and tropical hardwoods, soft woods, particle boards and glued woods.

Ryoba
The Ryoba is the most versatile Japanese saw for cabinetmaking and joinery as the blade has two different tooth patterns to allow for both crosscut and rip work. This Ryoba has a 240mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain on one side and triangular teeth for ripping along the grain on the opposite side. The trapezoidal teeth are sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The triangular rip teeth become progressively finer from tip to tang to make starting the cut easier and to use less force as the stroke progresses. Ryoba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces in hardwood, softwood and particle board.

Rattan Handle
Traditional in style, the blade is mounted on a lightweight wooden handle for fatigue free working and is wrapped in rattan for excellent comfort, breathability and hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
R1000 Dozuki
R1000 - Tooth Type Universal
R1000 - Blade Length 240mm
R1000 - Overall Length 530mm
R1000 - Blade Thickness 0.3mm
R1000 - Tooth Pitch 1.5mm
R1000 - Cut Depth 50mm
R1003 Kataba
R1003 - Tooth Type Crosscut
R1003 - Blade Length 240mm
R1003 - Overall Length 530mm
R1003 - Blade Thickness 0.6mm
R1003 - Tooth Pitch 1.9mm
R1006 Ryoba
R1006 - Tooth Type Crosscut & Rip
R1006 - Blade Length 240mm
R1006 - Overall Length 550mm
R1006 - Blade Thickness 0.6mm
R1006 - Tooth Pitch Crosscut 1.3mm
R1006 - Tooth Pitch Rip 2.4mm-3.8mm

Show more +
5.000 7 5

Customer Reviews

Reviews (7)
Write Review....

George Anglis

As a woodcarver this is my first set of decent Japanese saws and I am so happy I purchased them. They are great to use. The thin blades and the selection of cutting grades makes cutting so much easier compared to traditional saws. The quality of the saws is great. I would highly recommend this set for all types of accurate work.

Peter Rush

I needed to cut 2 inch thick oak accurately and because of the needs of the job it could not be done on my table saw. I bought the Japanese saw guide to assist me and this set of saws because at least one, the Kataba, could be used with the saw guide.

I was very impressed with the results. The saw guide was a big help and the Kataba saw was a joy to work with. The cut was fine, smooth and accurate.

I have used the other saws as well and they are great to use, particularly if you are doing precision work on larger pieces of wood.

I am doing more small tenons by hand of late and I think I might buy the compact set for that extra degree of precision.

I have only just starting using Rutlands but I did find their service impressive - next day really does mean next day.

Peter Walker

I've never used any other japanese or pull saws before but I have to say, these are stunningly impressive.

Slightly offputting when you first receive them as they are somewhat larger than you would imagine from looking at the pictures and you might mistake them for a set of murder weapons! The other disconcerting things is that the blades are rather thin and you may find that they don't appear to be perfectly straight.

These concerns disappear as soon as you use them though: they cut with ease through wood and leave a beautifully clean cut, even in my amateur hands. Regarding the blades not being straight, this is a function of them being thin and being designed to cut on the pull stroke; under the light tension of a gentle pull stroke they cut in a straight line.

Would recommend highly.

Tom Grainger

i've used japanese tools for s few years now and must say these are the best saws i've owned. i'm now trying to resist the temptation of some of the other tools.

R Kennedy

Never used a pull saw before so these took a little bit of getting used to but even in my inexperienced hands the result was still impressive. The saws are so sharp and seem to glide through whatever I'm cutting whether its delicate moulding or thick boards.

Richard Mckinlay

I ordered a set of these saws on the 18th of December and they arrived in Cork in the south of Ireland on the 21st. Great service again. Having used Japanese saws before I had no hesitation ordering this set, which were on offer with a free carrying case.
The saws are good quality and can handle all the different timber products that I can throw at them.
Highly recommended to the serious woodworker or the occasional user.
Good product and great service.

Steve Heptinstall

These arrived well packed and in very short timescale. Very easy to use. I am actually looking forward to my next doevetail project due to the clean precise cuts. Materials and workmanship of the tools ate very good.

First impresdions lead me to think I may invest in some Premium grade Japanese pull saws now I have tried them. Impressed.

Show more +

Japanese Saws - 240mm - Rattan - Set of 3

Rutlands
Part No. R1011
£99.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >