Premium Mitre Saw Blade - Ultra Fine Finish Crosscut - 300mm x 96T x 30mm x 3.2/2.2mm
Premium Mitre Saw Blade - Ultra Fine Finish Crosscut - 300mm x 96T x 30mm x 3.2/2.2mm
£69.99
inc. vat
Home > Sawing > Saw Blades > Circular Saw Blades > Mitre Saw Blades > Premium Mitre Saw Blade - Ultra Fine Finish Crosscut - 300mm x 96T x 30mm x 3.2/2.2mm

Key Features

  • Lifetime Warranty
    If any saw blade fails due to a material or manufacturing defect it will be replaced free of charge
  • Premium Mitre Saw Blade
    Ultra-fine finish on both top and bottom faces without feathering and tear out
  • Ideal for Precise Crosscutting
    On hardwood, softwood, veneer wood, particle board, laminates and composites
  • ATB Negative Tooth Geometry
    15° bevel angles with -5° negative hook angle
  • Achieve an Exceptional Finish
    Teeth shear the wood fibres cleanly using a planing motion
  • Made from German Tool Steel
    Consistently rated among the finest performing blades in the woodworking industry
  • Laser Cut with Anti-Vibration Technology
    Yielding a blade with substantial noise reduction
  • A Run-Out Accuracy Better than 0.025mm
    Each blade is tensioned and balanced to exceed the European standard for flatness

Show more +

Bundles

Total: £84.98
This Item: Premium Mitre Saw Blade - Ultra Fine Finish Crosscut - 300mm x 96T x 30mm x 3.2/2.2mm
£69.99

Product Details

This blade has been specifically designed for smooth, ultra-fine, clean crosscuts on standard or sliding mitre saws when sawing hardwood, softwood, particle board, laminates and composites. This mitre saw blade has ATB Negative (alternate top bevel) teeth which are angled across the top edge, with every other tooth leaning in the opposite direction. The 15° bevel angle combined with a -5° face hook results in a negative rake tooth geometry, allowing the teeth to shear the wood fibres cleanly using a planing motion, leaving exceptionally clean cuts through both the top and bottom surfaces.

Made from German tool steel, these saw blades are consistently rated among the finest performing blades in the woodworking industry. The steel plate is hardened to Rc44, cold rolled and then laser cut with anti-vibration technology, yielding a blade with substantial noise reduction. Each blade is tensioned and balanced to exceed the European standard for flatness, to ensure a run-out accuracy better than 0.025mm. The long-life carbide teeth are precision ground using Vollmer CNC machines which offer the highest level of accuracy, to achieve exact tooth geometry, allowing for clean, finish quality cuts time after time. The carbide tips are sandwich solder brazed with silver, copper, silver, making them impact resistant, minimising the risk of detachment.

These are exceptionally high quality mitre saw blades manufactured and designed for the professional woodworker who demands true and precise crosscut results. These premium mitre saw blades have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
This blade has been specifically designed for smooth, ultra-fine, clean crosscuts on standard or sliding mitre saws when sawing hardwood, softwood, particle board, laminates and composites. This mitre saw blade has ATB Negative (alternate top bevel) teeth which are angled across the top edge, with every other tooth leaning in the opposite direction. The 15° bevel angle combined with a -5° face hook results in a negative rake tooth geometry, allowing the teeth to shear the wood fibres cleanly using a planing motion, leaving exceptionally clean cuts through both the top and bottom surfaces.

Made from German tool steel, these saw blades are consistently rated among the finest performing blades in the woodworking industry. The steel plate is hardened to Rc44, cold rolled and then laser cut with anti-vibration technology, yielding a blade with substantial noise reduction. Each blade is tensioned and balanced to exceed the European standard for flatness, to ensure a run-out accuracy better than 0.025mm. The long-life carbide teeth are precision ground using Vollmer CNC machines which offer the highest level of accuracy, to achieve exact tooth geometry, allowing for clean, finish quality cuts time after time. The carbide tips are sandwich solder brazed with silver, copper, silver, making them impact resistant, minimising the risk of detachment.

These are exceptionally high quality mitre saw blades manufactured and designed for the professional woodworker who demands true and precise crosscut results. These premium mitre saw blades have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
Tooth Type ATB Negative
Diameter 300mm
Teeth 96
Kerf 3.2mm
Plate 2.2mm
Bore 30mm
Bevel Angle 15°
Hook Angle -5°

Show more +
5.000 2 5

Customer Reviews

Reviews (2)
Write Review....

Rich Samuels

Does exactly as described, the best crosscut blade I have purchased, the finish left on all species of wood is just incredible.

Claire Davidson

Never bought a good blade before but I definitely will be doing again. Leaves a good finish on both sides of the wood. Packaged well.

Show more +

Premium Mitre Saw Blade - Ultra Fine Finish Crosscut - 300mm x 96T x 30mm x 3.2/2.2mm

Rutlands®
Part No. R1505
£69.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >