Premium Table Saw Blades - 250mm - Set of 3 - 40T, 60T and 80T
Premium Table Saw Blades - 250mm - Set of 3 - 40T, 60T and 80T
£169.99
inc. vat
Home > Sawing > Saw Blades > Circular Saw Blades > Table Saw Blades > Premium Table Saw Blades - 250mm - Set of 3 - 40T, 60T and 80T

Key Features

  • Lifetime Warranty
    If any saw blade fails due to a material or manufacturing defect it will be replaced free of charge
  • Set of 3 Premium Table Saw Blades
    Achieve an exceptional finish on a wide range of materials
  • Ultra Fine Finish Crosscut Blade
    Features Hi-ATB geometry, ideal for precise crosscutting on veneer plywood, particle board, laminates, composites and solid woods
  • Fine Finish Crosscut & Rip Blades
    Feature ATB tooth geometry, for fast, feather free rip and crosscutting on hardwood, softwood, particle board and composite panels
  • Made from German Tool Steel
    Consistently rated among the finest performing blades in the woodworking industry
  • Laser Cut with Anti-Vibration Technology
    Yielding a blade with substantial noise reduction
  • A Run-Out Accuracy Better than 0.025mm
    Each blade is tensioned and balanced to exceed the European standard for flatness

Show more +

Product Details

Achieve an exceptional finish on a wide range of materials with this premium set of three table saw blades. The set contains an ultra fine finish crosscut blade with 80 teeth and two fine finish crosscut and rip blades, one with 60 teeth and the other with 40 teeth. All three blades are 250mm in diameter with a 30mm bore diameter, they have a plate width of 2.2mm and a kerf of 3.2mm. The set is rated amongst the finest in the industry.

Ultra Fine Finish Crosscut Blade
The 80T blade will achieve an ultra-fine finish without chipping and tear out, when crosscutting veneer plywood, particle board, laminates, composites and solid woods. The saw blade has Hi-ATB (high alternate top bevel) teeth which are angled across the top edge, with every other tooth leaning in the opposite direction. The steep 38 bevel angle combined with a -2 face hook results in a negative rake tooth geometry that shears the wood fibres cleanly using a planing motion, leaving exceptionally clean cuts through both top and bottom surfaces.

Fine Finish Crosscut & Rip Blades
The 60T and 40T blades are designed for both rip and crosscutting and will achieve a fine finish without feathering on hardwood, softwood, particle board and composite sheets. The blades have ATB (alternate top bevel) teeth which are angled across the top edge, with every other tooth leaning in the opposite direction. The 10 bevel angle combined with 15 face hook results in a tooth geometry that allows for fast rip and crosscutting with an incredibly clean finish. The carbide tips are sandwich solder brazed with silver, copper, silver, making them impact resistant, minimising the risk of detachment.

Made from German tool steel, these saw blades are consistently rated among the finest performing blades in the woodworking industry. The steel plate is hardened to Rc44, cold rolled and then laser cut with anti-vibration technology, yielding a blade with substantial noise reduction. Each blade is tensioned and balanced to exceed the European standard for flatness, to ensure a run-out accuracy better than 0.025mm. The long-life carbide teeth are precision ground using Vollmer CNC machines which offer the highest level of accuracy, to achieve exact tooth geometry, allowing for clean, finish quality cuts of panels time after time.

These exceptionally high quality saw blades have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge.
Achieve an exceptional finish on a wide range of materials with this premium set of three table saw blades. The set contains an ultra fine finish crosscut blade with 80 teeth and two fine finish crosscut and rip blades, one with 60 teeth and the other with 40 teeth. All three blades are 250mm in diameter with a 30mm bore diameter, they have a plate width of 2.2mm and a kerf of 3.2mm. The set is rated amongst the finest in the industry.

Ultra Fine Finish Crosscut Blade
The 80T blade will achieve an ultra-fine finish without chipping and tear out, when crosscutting veneer plywood, particle board, laminates, composites and solid woods. The saw blade has Hi-ATB (high alternate top bevel) teeth which are angled across the top edge, with every other tooth leaning in the opposite direction. The steep 38 bevel angle combined with a -2 face hook results in a negative rake tooth geometry that shears the wood fibres cleanly using a planing motion, leaving exceptionally clean cuts through both top and bottom surfaces.

Fine Finish Crosscut & Rip Blades
The 60T and 40T blades are designed for both rip and crosscutting and will achieve a fine finish without feathering on hardwood, softwood, particle board and composite sheets. The blades have ATB (alternate top bevel) teeth which are angled across the top edge, with every other tooth leaning in the opposite direction. The 10 bevel angle combined with 15 face hook results in a tooth geometry that allows for fast rip and crosscutting with an incredibly clean finish. The carbide tips are sandwich solder brazed with silver, copper, silver, making them impact resistant, minimising the risk of detachment.

Made from German tool steel, these saw blades are consistently rated among the finest performing blades in the woodworking industry. The steel plate is hardened to Rc44, cold rolled and then laser cut with anti-vibration technology, yielding a blade with substantial noise reduction. Each blade is tensioned and balanced to exceed the European standard for flatness, to ensure a run-out accuracy better than 0.025mm. The long-life carbide teeth are precision ground using Vollmer CNC machines which offer the highest level of accuracy, to achieve exact tooth geometry, allowing for clean, finish quality cuts of panels time after time.

These exceptionally high quality saw blades have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
R1500 Ultra Fine Finish Crosscut
R1500 - Tooth Type Hi-ATB
R1500 - Diameter 250mm
R1500 - Teeth 80
R1500 - Kerf 3.2mm
R1500 - Plate 2.2mm
R1500 - Bore 30mm
R1500 - Bevel Angle 38
R1500 - Hook Angle -2
R1501 Fine Finish Crosscut & Rip
R1501 - Tooth Type ATB
R1501 - Diameter 250mm
R1501 - Teeth 40
R1501 - Kerf 3.2mm
R1501 - Plate 2.2mm
R1501 - Bore 30mm
R1501 - Bevel Angle 10
R1501 - Hook Angle 15
R1502 Fine Finish Crosscut & Rip
R1502 - Tooth Type ATB
R1502 - Diameter 250mm
R1502 - Teeth 60
R1502 - Kerf 3.2mm
R1502 - Plate 2.2mm
R1502 - Bore 30mm
R1502 - Bevel Angle 10
R1502 - Hook Angle 15

Show more +
5.000 8 5

Customer Reviews

Reviews (8)
Write Review....

Doug Scott-skinner

I just used these to cut loads of 18mm hardwood ply. They were excellent. Cut the sheet material like butter and left a clean and crisp finish. I would highly recommend them.

Liam Crafter

I am very happy with my recent purchase from Rutlands of these 3 superb table saw blades. Each blade has a different tooth pattern to achieve professional quality results on composite materials to softwoods to hardwoods. It is important to work with quality blades if you want quality results, and these blades from Rutlands are very much comparable in quality to the leading brands.

William Osbourne

The best blade I have ever used, well worth the money for such a quality blade. As with any blade I would recommend cleaning it to remove resin - this prevents the wood from burning.

Alan Mellor

I purchased this blade for my table saw to make fine cuts for cutting boards in walnut and white oak. There was no burning when cutting and the cuts were smooth. Very pleased and highly recommend this blade.

Iain Kindred

It is important to get the basics right in a workshop and a lot of my colleagues underestimate the value of a top quality saw blade - this certainly is one. Highly recommended.

Mr Greaves

Decided to take a punt on the Rutlands blade as the image and product description really sold it to me. I was not disappointed, the cut quality is very good for both cross and rip cuts. I think I have found a new supplier of saw blades.

Ester Mac

It makes a nice thin kerf and leaves the wood with a smooth surface. I've used it on several species of wood with excellent results.

Frank Richards

Just picked up blade and can't believe how smooth the cuts are, it cuts through hard woods like butter.

Show more +

Premium Table Saw Blades - 250mm - Set of 3 - 40T, 60T and 80T

Rutlands
Part No. R1514
£169.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >