Premium Track Saw Blade - Ultra Fine Finish Crosscut & Rip - 216mm x 60T x 30mm x 1.6/1.1mm
Premium Track Saw Blade - Ultra Fine Finish Crosscut & Rip - 216mm x 60T x 30mm x 1.6/1.1mm
£49.99
inc. vat
Home > Sawing > Saw Blades > Circular Saw Blades > Track Saw Blades > Premium Track Saw Blade - Ultra Fine Finish Crosscut & Rip - 216mm x 60T x 30mm x 1.6/1.1mm

Key Features

  • Lifetime Warranty
    If any saw blade fails due to a material or manufacturing defect it will be replaced free of charge
  • Premium Track Saw Blade
    Ultra-fine finish on both top and bottom faces without feathering and tear out
  • Ideal for Precise Rip and Crosscutting
    On hardwood, softwood, veneer wood, particle board, laminates and composites
  • ATB Negative Tooth Geometry
    10° bevel angles with 15° hook angle
  • Thin Kerf
    33% less material is removed and consequently less strain is put on the motor of the saw
  • Made from German Tool Steel
    Consistently rated among the finest performing blades in the woodworking industry
  • Laser Cut with Anti-Vibration Technology
    Yielding a blade with substantial noise reduction
  • A Run-Out Accuracy Better than 0.025mm
    Each blade is tensioned and balanced to exceed the European standard for flatness

Show more +

Bundles

Total: £64.98
This Item: Premium Track Saw Blade - Ultra Fine Finish Crosscut & Rip - 216mm x 60T x 30mm x 1.6/1.1mm
£49.99

Product Details

These premium blades have been specifically developed for use with track saws for precise, ultra-fine finish sawing. They will rip and crosscut hardwood, softwood, particle board, laminates and composite panels. The blade has ATB (alternate top bevel) thin kerf teeth which are angled across the top edge, with every other tooth leaning in the opposite direction. The 10° bevel angle combined with 15° face hook results in a tooth geometry that allows for smooth, fast rip and crosscutting, leaving an ultra fine finish. The thin kerf which is approximately 33% narrower than similar blades means that less material is removed and consequently less strain is put on the motor of the saw.

Made from German tool steel, these saw blades are consistently rated among the finest performing blades in the woodworking industry. The steel plate is hardened to Rc44, cold rolled and then laser cut with anti-vibration technology, yielding a blade with substantial noise reduction. Each blade is tensioned and balanced to exceed the European standard for flatness, to ensure a run-out accuracy better than 0.025mm. The long-life carbide teeth are precision ground using Vollmer CNC machines which offer the highest level of accuracy, to achieve exact tooth geometry, allowing for clean, finish quality cuts time after time. The carbide tips are sandwich solder brazed with silver, copper, silver, making them impact resistant, minimising the risk of detachment.

These are exceptionally high quality track saw blades manufactured and designed for the professional woodworker who demands true and precise sawing results. These premium saw blades have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
These premium blades have been specifically developed for use with track saws for precise, ultra-fine finish sawing. They will rip and crosscut hardwood, softwood, particle board, laminates and composite panels. The blade has ATB (alternate top bevel) thin kerf teeth which are angled across the top edge, with every other tooth leaning in the opposite direction. The 10° bevel angle combined with 15° face hook results in a tooth geometry that allows for smooth, fast rip and crosscutting, leaving an ultra fine finish. The thin kerf which is approximately 33% narrower than similar blades means that less material is removed and consequently less strain is put on the motor of the saw.

Made from German tool steel, these saw blades are consistently rated among the finest performing blades in the woodworking industry. The steel plate is hardened to Rc44, cold rolled and then laser cut with anti-vibration technology, yielding a blade with substantial noise reduction. Each blade is tensioned and balanced to exceed the European standard for flatness, to ensure a run-out accuracy better than 0.025mm. The long-life carbide teeth are precision ground using Vollmer CNC machines which offer the highest level of accuracy, to achieve exact tooth geometry, allowing for clean, finish quality cuts time after time. The carbide tips are sandwich solder brazed with silver, copper, silver, making them impact resistant, minimising the risk of detachment.

These are exceptionally high quality track saw blades manufactured and designed for the professional woodworker who demands true and precise sawing results. These premium saw blades have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
Tooth Type ATB Thin Kerf
Diameter 216mm
Teeth 60
Kerf 1.6mm
Plate 1.1mm
Bore 30mm
Bevel Angle 10°
Hook Angle 15°

Show more +
5.000 2 5

Customer Reviews

Reviews (2)
Write Review....

Simon White

Full of features and benefits that you do not know you need until you've used a quality blade. It will really make a difference to your finished work.

Martin Corrigon

Only one blade now needed instead of two separate ones for ripping and cross cutting. Quite pricey but worth the money and the blades actually look as good as they do in the images.

Show more +

Premium Track Saw Blade - Ultra Fine Finish Crosscut & Rip - 216mm x 60T x 30mm x 1.6/1.1mm

Rutlands®
Part No. R1507
£49.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >