180mm Japanese Sharpening Stone System 1000/2000/3000
£49.99
inc. vat
Home > Sharpening > Japanese Water Stones > Water Stone Sets > 180mm Japanese Sharpening Stone System 1000/2000/3000
Key Features
- Lifetime Warranty
If any Japanese waterstone fails due to a material or manufacturing defect it will be replaced free of charge - Complete System
Three water stones, a flattening stone, knife sharpening guide and a holder with trough - Premium Japanese Water Stones
Sharpen, hone and mirror-polish knives and fine edge woodworking tools - Perfect Water Stone Formulation
Excellent for sharpening tool steel and tough alloys such as A2 and M2 high speed steels - Long Lasting
Stone wears slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that wear down more quickly - Fast and Easy Use
Simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point the water stone is ready to start sharpening - Bring Tools Back to Life
Add razor sharp edges to chisels, plane irons, knives, scissors, turning tools and carving tools - Time to Step Up a Grade
Fresh abrasive particles break down and dull during the sharpening process allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine mirror-finish 3000 grit stone
Bundles
This Item: 180mm Japanese Sharpening Stone System 1000/2000/3000
£49.99
Diamond Flattening Stone
£14.99
Product Details
This premium sharpening stone system is all that is needed to sharpen and hone chisels, plane blades, knives and more. A triangular prism houses 1000, 2000 and 3000 grit 180mm water stones, this prism can be rotated in its holder depending on your choice of water stone. The holder also acts as a trough to catch excess water and sharpening residue. A 60mm x 20mm wide mini-flattening stone is included for reshaping the surface of the stone, as well as a knife sharpening guide.
The premium Japanese water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. The finish that you achieve with a water stone is a combination of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly. The water stone formulation is excellent for sharpening O1 general tool steel, the steel commonly used to make knives and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the waterstone retains moisture during the sharpening process.
The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine mirror-finish 3000 grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the waterstone. The stone is mounted in a rubber polymer base to stop the stone from wandering during the sharpening process whilst protecting the work surface from scratching.
The system consists of 1000, 2000 and 3000 grit water stones. The 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit water stone is used after the 1000 grit stone to refine the edge of knives and tools and the 3000 grit water stone is used to quickly add a mirror finish and final polish. The water stones measure 180mm in length with a width of 60mm and a depth of 14mm. These premium Japanese water stones are excellent for the sharpening, honing and mirror polishing of kitchen knives, outdoor knives and all fine edge woodworking tools. These stones have a lifetime warranty and in the event that they fail due to a material or manufacturing defect will be replaced free of charge. ©
The premium Japanese water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. The finish that you achieve with a water stone is a combination of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly. The water stone formulation is excellent for sharpening O1 general tool steel, the steel commonly used to make knives and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the waterstone retains moisture during the sharpening process.
The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine mirror-finish 3000 grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the waterstone. The stone is mounted in a rubber polymer base to stop the stone from wandering during the sharpening process whilst protecting the work surface from scratching.
The system consists of 1000, 2000 and 3000 grit water stones. The 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit water stone is used after the 1000 grit stone to refine the edge of knives and tools and the 3000 grit water stone is used to quickly add a mirror finish and final polish. The water stones measure 180mm in length with a width of 60mm and a depth of 14mm. These premium Japanese water stones are excellent for the sharpening, honing and mirror polishing of kitchen knives, outdoor knives and all fine edge woodworking tools. These stones have a lifetime warranty and in the event that they fail due to a material or manufacturing defect will be replaced free of charge. ©
This premium sharpening stone system is all that is needed to sharpen and hone chisels, plane blades, knives and more. A triangular prism houses 1000, 2000 and 3000 grit 180mm water stones, this prism can be rotated in its holder depending on your choice of water stone. The holder also acts as a trough to catch excess water and sharpening residue. A 60mm x 20mm wide mini-flattening stone is included for reshaping the surface of the stone, as well as a knife sharpening guide.
The premium Japanese water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. The finish that you achieve with a water stone is a combination of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly. The water stone formulation is excellent for sharpening O1 general tool steel, the steel commonly used to make knives and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the waterstone retains moisture during the sharpening process.
The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine mirror-finish 3000 grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the waterstone. The stone is mounted in a rubber polymer base to stop the stone from wandering during the sharpening process whilst protecting the work surface from scratching.
The system consists of 1000, 2000 and 3000 grit water stones. The 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit water stone is used after the 1000 grit stone to refine the edge of knives and tools and the 3000 grit water stone is used to quickly add a mirror finish and final polish. The water stones measure 180mm in length with a width of 60mm and a depth of 14mm. These premium Japanese water stones are excellent for the sharpening, honing and mirror polishing of kitchen knives, outdoor knives and all fine edge woodworking tools. These stones have a lifetime warranty and in the event that they fail due to a material or manufacturing defect will be replaced free of charge. ©
The premium Japanese water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. The finish that you achieve with a water stone is a combination of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly. The water stone formulation is excellent for sharpening O1 general tool steel, the steel commonly used to make knives and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the waterstone retains moisture during the sharpening process.
The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine mirror-finish 3000 grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the waterstone. The stone is mounted in a rubber polymer base to stop the stone from wandering during the sharpening process whilst protecting the work surface from scratching.
The system consists of 1000, 2000 and 3000 grit water stones. The 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit water stone is used after the 1000 grit stone to refine the edge of knives and tools and the 3000 grit water stone is used to quickly add a mirror finish and final polish. The water stones measure 180mm in length with a width of 60mm and a depth of 14mm. These premium Japanese water stones are excellent for the sharpening, honing and mirror polishing of kitchen knives, outdoor knives and all fine edge woodworking tools. These stones have a lifetime warranty and in the event that they fail due to a material or manufacturing defect will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Length
180mm
Width
60mm
Depth
14mm
Show more +
4.625
8
5
Customer Reviews
Reviews (8)
Write Review....
JemScot
Neat unit. You know where all your stones are! I'm a bit of a beginner when it comes to chisel care but, having just inherited a distinctly ancient mix of chisels from my Dad, I can confirm that even the ropiest chisel can be rejuvenated by a bit of TLC and the close attention of these stones.
Ben Hoggard
Absolutely spot on for the money. Great value for 3 separate grits, really handy holder/trough too - very pleased! Sharpened a full set of chisels and all my plane irons, they cut really well - easy enough to flatten too with a diamond plate. Couldn't be bothered to strop so took the plane irons straight from the 3000 grit stone and into the planes - they cut beautifully.
Tim Greenwood
Rutlands have cracked it with their range of sharpening stones and this set is probably the best set they have brought out. Contains everything I need to leave a perfect edge on my tools.
Yuri
Really clever little product, it saves having to purchase different grit stones separately. The 3 stones included are perfect for sharpening knifes and tool blades. Would recommned.
Edward Tucker
Wow excellent service and a great product, really happy with my stones for both chisels and my wifes knives. Highly recommend.
Rob Gibbs
A really practical and space saving sharpening device for honing any blade or chisel that already has a defined bevel.
Would have got 5 stars but one stone was detached so a better fixing solution is needed.
Would have got 5 stars but one stone was detached so a better fixing solution is needed.
Phil Watson
I was disappointed that the parcel arrived with two of the stone unstuck from the frame. Hopefully I will be advised on how to remedy this. Otherwise it would have got full marks.
Phil Watson
A really neat unit but disappointing to find that two of the stone arrived unstuck from the frame.
Hopefully Rutland will remedy this.
Hopefully Rutland will remedy this.
Show more +
£49.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process