Premium 180mm Multi-Profile Japanese Water Stone - Set of 3
Premium 180mm Multi-Profile Japanese Water Stone - Set of 3
£49.99
inc. vat
Home > Sharpening > Japanese Water Stones > Water Stone Sets > Premium 180mm Multi-Profile Japanese Water Stone - Set of 3

Key Features

  • Lifetime Warranty
    If any Japanese water stone fails due to a material or manufacturing defect it will be replaced free of charge
  • Premium Multi-Profile Japanese Water Stones
    Sharpen, hone and mirror-polish carving tools, gouges and chisels
  • Perfect Water Stone Formulation
    Excellent for sharpening tool steel and tough alloys such as A2 and M2 high speed steels
  • Bring Tools Back to Life
    Add razor sharp edges to V tools, gouges and chisels
  • Long Lasting
    Stone wears slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that wear down more quickly
  • Fast and Easy Use
    Simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point the water stone is ready to start sharpening
  • Time to Step Up a Grade
    Fresh abrasive particles break down and dull during the sharpening process allowing you to move seamlessly through the varying grits of stones
  • Three Most Popular Stone Grits
    Remove nicks, create a basic edge, sharpen, remove burr, hone, mirror polish

Show more +

Bundles

Total: £69.98
This Item: Premium 180mm Multi-Profile Japanese Water Stone - Set of 3
£49.99

Product Details

These premium multi-profile Japanese water stones are designed for sharpening wood carving chisels, gouges and other fine tools with profiled blades. The stones feature both convex and concave radii profiles for in-cannel and out-cannel sharpening of gouges and V tools. The rear of the stone is flat to allow for the sharpening of straight edge tools such as skew and bevel edge chisels. These water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. The finish that you achieve with a water stone is a combination of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly.

The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process. The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine 3000 grit stone for mirror finishing. After use leave the water stone to dry out naturally.

This set consist of 1000, 2000 and 3000 grit profiled water stones. The 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit water stone is used after the 1000 grit stone to refine the edge and the 3000 grit water stone is used to quickly add a mirror finish and final polish. The stones measure 180mm in length with a width of 60mm and a depth of 16mm. These Japanese water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©
These premium multi-profile Japanese water stones are designed for sharpening wood carving chisels, gouges and other fine tools with profiled blades. The stones feature both convex and concave radii profiles for in-cannel and out-cannel sharpening of gouges and V tools. The rear of the stone is flat to allow for the sharpening of straight edge tools such as skew and bevel edge chisels. These water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. The finish that you achieve with a water stone is a combination of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly.

The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process. The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine 3000 grit stone for mirror finishing. After use leave the water stone to dry out naturally.

This set consist of 1000, 2000 and 3000 grit profiled water stones. The 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit water stone is used after the 1000 grit stone to refine the edge and the 3000 grit water stone is used to quickly add a mirror finish and final polish. The stones measure 180mm in length with a width of 60mm and a depth of 16mm. These Japanese water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
Length 180mm
Width 60mm
Depth 16mm
Weight 280g

Show more +
5.000 2 5

Customer Reviews

Reviews (2)
Write Review....

Frank Richards

Really useful if your getting flat spots when sharpening gouges, These will help you. These totally work.

David Jones

I use these water stones on a daily basis to put an edge back on my carving tools. Soak in a bath of water for no longer than two minutes and away you go. Be careful not to apply too much pressure as the stones are quite soft and you can leave grooves.

Show more +

Premium 180mm Multi-Profile Japanese Water Stone - Set of 3

Rutlands®
Part No. R7531
£49.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >