Premium Japanese Water Stone Kit - Cabinetmaker
Premium Japanese Water Stone Kit - Cabinetmaker
£99.99
inc. vat
Home > Sharpening > Japanese Water Stones > Water Stone Sharpening Kits > Premium Japanese Water Stone Kit - Cabinetmaker

Key Features

  • Lifetime Warranty
    If any water stone, knife sharpening guide, honing guide or diamond flattening stone fails due to a material or manufacturing defect it will be replaced free of charge
  • Cabinetmakers Sharpening Kit
    Precise shaping and sharpening of fine edge woodworking tools, knives and scissors
  • Complete Sharpening Kit
    Double sided Japanese water stone, knife sharpening guide, honing guide, diamond flattening stone
  • Premium Japanese Combination Water Stones
    Sharpen, hone and mirror-polish knives and fine edge woodworking tools
  • Premium Honing Guide Sled
    Allows for fast, consistent and accurate honing of wood chisels and plane irons
  • Premium Diamond Flattening Stone
    Allows you to maintain your sharpening stones as true and as flat as possible
  • Premium Knife Sharpening Guide
    Seats the knife at the correct angle to create a mirror finish, razor sharp edge

Show more +

Bundles

Total: £116.98
This Item: Premium Japanese Water Stone Kit - Cabinetmaker
£99.99

Product Details

This sharpening kit is favoured by cabinetmakers for the precise shaping and sharpening of fine edge woodworking tools, such as plane blades, chisels, carving tools and for knives and scissors. The set comprises of an extra large, double sided 1000/6000 grit Japanese water stone (R7508), honing guide sled (R7515), knife sharpening guide (R7513) and a diamond flattening stone (R7511).

Premium 200mm Japanese Combination Water Stone - 1000/6000
The premium Japanese combination water stone is man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process. The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse grit stone, to a medium grit stone to a fine grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the water stone. This combination water stone is 1000 grit and 6000 grit. The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 6000 grit water stone is for removing burrs, polishing and honing.

Premium Knife Sharpening Guide
The knife sharpening guide is used in conjunction with a water or diamond stone, seating the knife at the correct angle to create a mirror finish, razor sharp edge. Free hand sharpening can lead to an inconsistent finish across the bevel resulting in a lack of sharpness. The guide clips on to the back of the knife blade and by raising it slightly presents the cutting edge at an angle to the sharpening stone. The knife can then be sharpened in full confidence that it is being honed to the correct cutting angle. The guide can be used with any length of blade and can be repositioned along the blade when working on long fish or meat knives. The honing guide is made from a hard wearing, no-mar polymer and will travel over the surface of the sharpening stone without causing damage.

Premium Honing Guide
The premium honing guide sled allows for fast, consistent and accurate honing of wood chisels and plane irons. Precision CNC machined from aircraft grade aluminium the sliding carriage glides back and forth on a stainless steel bar, travelling through a housing which features 50 micro ball-bearings, ensuring a smooth, effortless movement with no lateral play. The head uses a clamping bar that registers on the face of the blade and accepts flat and tapered blades up to 9mm thick and 52mm wide. A series of parallel lines are etched onto the head to ensure the chisel or plane iron sits square to the jig. You can lock-off the head at your desired honing angle anywhere from 10-60 using an Allen key or as favoured by most, you can leave the head unlocked and simply copy the existing angle of the blade edge. The base of the jig accepts water stones from 160mm to 200mm in length and up to 80mm in width, held in position using the aluminium clamping block. This sled, unlike a traditional hand held honing guide eliminates any lateral or longitudinal play, allowing the blade to smoothly, consistently and accurately move over the sharpening stone.

Premium Diamond Flattening Stone
Water stones need to be perfectly flat to produce the finest sharpening results. This diamond flattening stone allows you to maintain your sharpening stones as true and as flat as possible. It can be used on all grades of water stones and features a high-quality diamond abrasive that allows for fast removal of material. The diamond plate is double sided and is held in position by two powerful rare earth magnets. The 220 grit diamond quickly removes material to flatten your stone and then the 360 grit diamond produces an extremely smooth finish. The integrated spirit level on top of the housing allows you to gauge the flatness of your water stone. A series of perforations on the diamond plate virtually eliminate clogging as they create reservoirs for the swarf to sit in, which is then periodically washed away. This flattening stone is essential to ensure you achieve the best possible sharpening results every time.

This kit comes with a lifetime warranty and in the event that any item should fail due to a material or manufacturing defect it will be replaced free of charge.
This sharpening kit is favoured by cabinetmakers for the precise shaping and sharpening of fine edge woodworking tools, such as plane blades, chisels, carving tools and for knives and scissors. The set comprises of an extra large, double sided 1000/6000 grit Japanese water stone (R7508), honing guide sled (R7515), knife sharpening guide (R7513) and a diamond flattening stone (R7511).

Premium 200mm Japanese Combination Water Stone - 1000/6000
The premium Japanese combination water stone is man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process. The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse grit stone, to a medium grit stone to a fine grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the water stone. This combination water stone is 1000 grit and 6000 grit. The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 6000 grit water stone is for removing burrs, polishing and honing.

Premium Knife Sharpening Guide
The knife sharpening guide is used in conjunction with a water or diamond stone, seating the knife at the correct angle to create a mirror finish, razor sharp edge. Free hand sharpening can lead to an inconsistent finish across the bevel resulting in a lack of sharpness. The guide clips on to the back of the knife blade and by raising it slightly presents the cutting edge at an angle to the sharpening stone. The knife can then be sharpened in full confidence that it is being honed to the correct cutting angle. The guide can be used with any length of blade and can be repositioned along the blade when working on long fish or meat knives. The honing guide is made from a hard wearing, no-mar polymer and will travel over the surface of the sharpening stone without causing damage.

Premium Honing Guide
The premium honing guide sled allows for fast, consistent and accurate honing of wood chisels and plane irons. Precision CNC machined from aircraft grade aluminium the sliding carriage glides back and forth on a stainless steel bar, travelling through a housing which features 50 micro ball-bearings, ensuring a smooth, effortless movement with no lateral play. The head uses a clamping bar that registers on the face of the blade and accepts flat and tapered blades up to 9mm thick and 52mm wide. A series of parallel lines are etched onto the head to ensure the chisel or plane iron sits square to the jig. You can lock-off the head at your desired honing angle anywhere from 10-60 using an Allen key or as favoured by most, you can leave the head unlocked and simply copy the existing angle of the blade edge. The base of the jig accepts water stones from 160mm to 200mm in length and up to 80mm in width, held in position using the aluminium clamping block. This sled, unlike a traditional hand held honing guide eliminates any lateral or longitudinal play, allowing the blade to smoothly, consistently and accurately move over the sharpening stone.

Premium Diamond Flattening Stone
Water stones need to be perfectly flat to produce the finest sharpening results. This diamond flattening stone allows you to maintain your sharpening stones as true and as flat as possible. It can be used on all grades of water stones and features a high-quality diamond abrasive that allows for fast removal of material. The diamond plate is double sided and is held in position by two powerful rare earth magnets. The 220 grit diamond quickly removes material to flatten your stone and then the 360 grit diamond produces an extremely smooth finish. The integrated spirit level on top of the housing allows you to gauge the flatness of your water stone. A series of perforations on the diamond plate virtually eliminate clogging as they create reservoirs for the swarf to sit in, which is then periodically washed away. This flattening stone is essential to ensure you achieve the best possible sharpening results every time.

This kit comes with a lifetime warranty and in the event that any item should fail due to a material or manufacturing defect it will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
R7508 Premium 200mm Japanese Combination Water Stone - 1000/6000
Length 200mm
Width 80mm
Depth 30mm
Weight 1000g
R7515 Premium Honing Guide Sled
Stone Length Capacity 160 - 200mm
Stone Width Capacity 0 - 80mm
Max Blade Width 52mm
Max Blade Thickness 9mm
Overall Length 290mm
R7511 Premium Diamond Flattening Stone
Diamond Plate Size 110mm x 55mm

Show more +
5.000 6 5

Customer Reviews

Reviews (6)
Write Review....

James Bullock

What a wonderfully engineered well thought out piece of kit ! This will not only speed up your sharpening process but take a lot of the guess work out of it too. The engineering looks and feels robust and sturdy and finished well...after inspection not one sharp edge or dodgy thread anywhere and very swift delivery. Thank you Rutland's...another quality product at much less than some other similar premium products.

Martin Singh

So good, this really helps me level my stones because it has a built in level. I like it because when i am on an uneven work surface I know if its level even if my bench isnt level. All you need to do is hold it level and more it around to level it off level.

Edward Smith

This is the best accompanying product I have purchased, I use it periodically to make sure that my Japanese Waterstones are kept perfectly flat. Having 2 different grits is particularly useful, one to remove the waste material and one to leave a smooth sharpening surface

Wesley Mckay

Makes sharpening my chisels and plane irons a lot easier.

Ollie Wright

Wow what a product, if only I knew this existed years ago it would have saved so much time compared to setting up manual honing guides. All you have to do is insert the chisel into the holder ( tip - the length inserted determines the sharpening angle ) and sharpen. Very easy to switch between grits of stone while the blades is clamped which means you can return to the same sharpening angle.

Evan Jenkins

I do a lot of sharpening of chisels and plane blades and I have never found a product that gives consistent results like this. I simply lock the jig off at my desired angle and sharpen then hone the blade as required.

Show more +

Premium Japanese Water Stone Kit - Cabinetmaker

Rutlands
Part No. R7539
£99.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >