200mm Japanese Combination Water Stone - 1000/6000
£39.99
inc. vat
Home > Sharpening > Japanese Water Stones > Water Stones Combination - 200mm > 200mm Japanese Combination Water Stone - 1000/6000
Key Features
- Lifetime Warranty
If any Japanese water stone fails due to a material or manufacturing defect it will be replaced free of charge - Premium Japanese Large Combination Water Stones
Sharpen, hone and mirror-polish knives and fine edge woodworking tools - Large Surface Area
Aids sharpening performance, sharpen wide plane blades, extra support for honing guides when sharpening chisels and knives - Perfect Water Stone Formulation
Excellent for sharpening tool steel and tough alloys such as A2 and M2 high speed steels - Bring Tools Back to Life
Add razor sharp edges to chisels, plane irons, knives, scissors, turning tools and carving tools - Long Lasting
Stone wears slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that wear down more quickly - Fast and Easy Use
Simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point the water stone is ready to start sharpening - Time to Step Up a Grade
Fresh abrasive particles break down and dull during the sharpening process allowing you to move seamlessly through the varying grits of stones - Most Popular Grit Offerings
Remove nicks, create a basic edge, sharpen, remove burr, hone, mirror polish
Bundles
This Item: 200mm Japanese Combination Water Stone - 1000/6000
£39.99
Diamond Flattening Stone
£14.99
Product Details
These are the largest water stones that we offer measuring 200mm in length by 80mm in width and 30mm in depth. The large surface area aids the sharpening performance, allows for the sharpening of wide plane blades and offers extra support for honing guides when sharpening chisels and knives. These premium Japanese combination water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. Combination stones consist of two stones of different grits which are machine-fused together to create a permanent joint, allowing you to rotate the stones to select the most appropriate grit. The finish that you achieve with a water stone is an amalgamation of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly.
The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process.
The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse grit stone, to a medium grit stone to a fine grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the water stone. These combination stones sit in a polymer base which has four no-mar rubber feet to prevent the stone from wandering during the sharpening process whilst protecting the work surface from scratching. These combination stones come with a 60mm x 20mm wide mini-flattening stone for reshaping the surface of the stone.
This combination water stone is 1000 grit and 6000 grit. The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 6000 grit water stone is used to remove burr, polish and hone. These large, long-life water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©
The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process.
The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse grit stone, to a medium grit stone to a fine grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the water stone. These combination stones sit in a polymer base which has four no-mar rubber feet to prevent the stone from wandering during the sharpening process whilst protecting the work surface from scratching. These combination stones come with a 60mm x 20mm wide mini-flattening stone for reshaping the surface of the stone.
This combination water stone is 1000 grit and 6000 grit. The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 6000 grit water stone is used to remove burr, polish and hone. These large, long-life water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©
These are the largest water stones that we offer measuring 200mm in length by 80mm in width and 30mm in depth. The large surface area aids the sharpening performance, allows for the sharpening of wide plane blades and offers extra support for honing guides when sharpening chisels and knives. These premium Japanese combination water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. Combination stones consist of two stones of different grits which are machine-fused together to create a permanent joint, allowing you to rotate the stones to select the most appropriate grit. The finish that you achieve with a water stone is an amalgamation of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly.
The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process.
The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse grit stone, to a medium grit stone to a fine grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the water stone. These combination stones sit in a polymer base which has four no-mar rubber feet to prevent the stone from wandering during the sharpening process whilst protecting the work surface from scratching. These combination stones come with a 60mm x 20mm wide mini-flattening stone for reshaping the surface of the stone.
This combination water stone is 1000 grit and 6000 grit. The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 6000 grit water stone is used to remove burr, polish and hone. These large, long-life water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©
The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process.
The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse grit stone, to a medium grit stone to a fine grit stone. After use leave the water stone to dry out naturally, before using a diamond flattening stone to re-level the face of the water stone. These combination stones sit in a polymer base which has four no-mar rubber feet to prevent the stone from wandering during the sharpening process whilst protecting the work surface from scratching. These combination stones come with a 60mm x 20mm wide mini-flattening stone for reshaping the surface of the stone.
This combination water stone is 1000 grit and 6000 grit. The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 6000 grit water stone is used to remove burr, polish and hone. These large, long-life water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Length
200mm
Width
80mm
Depth
30mm
Weight
1000g
Show more +
5.000
2
5
Customer Reviews
Reviews (2)
Write Review....
Edward Tucker
Great product. Really happy with this addition to my stones. Awesome service as well.
Martyn Freeman
Used for the first time yesterday and after sharpening one of my chisels I had to do the rest. Everything came up beautifully sharp. I just need the time to get to my hand planes.
Sharpened very quickly and the tray for the stone catches most of the dirty water off the stone.
Sharpened very quickly and the tray for the stone catches most of the dirty water off the stone.
Show more +
£39.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process