180mm Multi-Profile Japanese Water Stone - 1000
£19.99
inc. vat
Home > Sharpening > Japanese Water Stones > Water Stones Multi-Profile > 180mm Multi-Profile Japanese Water Stone - 1000
Key Features
- Lifetime Warranty
If any Japanese water stone fails due to a material or manufacturing defect it will be replaced free of charge - Premium Multi-Profile Japanese Water Stones
Sharpen, hone and mirror-polish carving tools, gouges and chisels - Perfect Water Stone Formulation
Excellent for sharpening tool steel and tough alloys such as A2 and M2 high speed steels - Bring Tools Back to Life
Add razor sharp edges to V tools, gouges and chisels - Long Lasting
Stone wears slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that wear down more quickly - Fast and Easy Use
Simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point the water stone is ready to start sharpening - Time to Step Up a Grade
Fresh abrasive particles break down and dull during the sharpening process allowing you to move seamlessly through the varying grits of stones
Bundles
This Item: 180mm Multi-Profile Japanese Water Stone - 1000
£19.99
Sharpening Stone Holder
£19.99
Product Details
These premium multi-profile Japanese water stones are designed for sharpening wood carving chisels, gouges and other fine tools with profiled blades. The stones feature both convex and concave radii profiles for in-cannel and out-cannel sharpening of gouges and V tools. The rear of the stone is flat to allow for the sharpening of straight edge tools such as skew and bevel edge chisels. These water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. The finish that you achieve with a water stone is a combination of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly.
The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process. The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine 3000 grit stone for mirror finishing. After use leave the water stone to dry out naturally.
This 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The stone measures 180mm in length with a width of 60mm and a depth of 16mm. These Japanese water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©
The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process. The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine 3000 grit stone for mirror finishing. After use leave the water stone to dry out naturally.
This 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The stone measures 180mm in length with a width of 60mm and a depth of 16mm. These Japanese water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©
These premium multi-profile Japanese water stones are designed for sharpening wood carving chisels, gouges and other fine tools with profiled blades. The stones feature both convex and concave radii profiles for in-cannel and out-cannel sharpening of gouges and V tools. The rear of the stone is flat to allow for the sharpening of straight edge tools such as skew and bevel edge chisels. These water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. The finish that you achieve with a water stone is a combination of the particle size, durability of the abrasive and the resin bond strength. These water stones have a medium strength bond and wear relatively slowly, releasing fresh, sharp abrasive at a reduced rate in comparison to stones with weaker bonds that release abrasive at higher rates and wear down more quickly.
The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process. The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine 3000 grit stone for mirror finishing. After use leave the water stone to dry out naturally.
This 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The stone measures 180mm in length with a width of 60mm and a depth of 16mm. These Japanese water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©
The water stone formulation is excellent for sharpening O1 general tool steel, a steel commonly used to make knives, and are fast cutting when sharpening tough alloys such as A2 and M2 high speed steels which are used to manufacture chisels, plane irons, turning and carving tools. You simply immerse the stones in water and allow to soak for 3 to 5 minutes, at which point they are ready for use. It is important to ensure the water stone retains moisture during the sharpening process. The fresh abrasive particles break down and dull during the sharpening process, creating progressively finer grits, allowing you to move seamlessly from a coarse 1000 grit stone, to a medium 2000 grit stone to the fine 3000 grit stone for mirror finishing. After use leave the water stone to dry out naturally.
This 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The stone measures 180mm in length with a width of 60mm and a depth of 16mm. These Japanese water stones have a lifetime warranty and in the event of a failure due to a material or manufacturing defect the stone will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Length
180mm
Width
60mm
Depth
16mm
Weight
280g
Show more +
5.000
4
5
Customer Reviews
Reviews (4)
Write Review....
John Copp
I bought these to go with the set of carving tools supplied by Rutlands. Superb price and very good quality, they make the job of sharpening a lot easier., producing a good edge before honing. Very nice. :-)
Mark Okeefe
Once again, excellent quality product from Rutlands at a very reasonable price. The Waterstones are reliable and easy to use, producing an exceptionally sharp edge.
Michael Holton
I needed something to keep a set of hand chisels and gouges sharp. I'm not the best at sharpening so hoped these would help me get a better edge. I was right. They do a great job and as the chisels were given to me by a retired carpenter I can now do them justice. Thanks
Paul Jackson
Recently bought these for my turning chisels and gouges. Work great and put really good honed edges. Glad I decided to give them a try
Show more +
£19.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process