Premium Woodturning Lathe Stand
£149.99
inc. vat
Key Features
- Lifetime Warranty
If the stand fails due to a material or manufacturing defect it will be replaced free of charge - Heavy Duty Woodturning Lathe Stand
Made from heavy gauge hardened steel - Stitch Welded for Strength
Absorbs the weight of solid cast lathes - Epoxy Powder Painted
Takes the knocks and bumps associated with a busy workshop - Free-Standing Legs are Splayed for Maximum Stability
Allows for ample foot room underneath the lathe - Height Adjustable
Adjust the height to suit the woodturner in 25mm increments - Optional Extension Piece
To accept longer lathes or lathes with bed extensions
Bundles
This Item: Premium Woodturning Lathe Stand
£149.99
Product Details
This is a very heavy duty woodturning lathe stand that should not be confused with the array of low cost lookalikes. The stand is manufactured from hardened, heavy gauge steel pressings which have been stitch welded together to create immense strength. These tubular sections are finished in an epoxy powder coated paint that is resistant to the knocks and bumps associated with a busy workshop.
Designed to be free-standing the legs are splayed for maximum stability and to allow for ample foot room and feature height adjustable rubber coated feet for seating on uneven floors. The stand adjusts from 590mm to 946mm in length and from 615mm to 876mm in height. The height of the lathe stand can be adjusted in 25mm increments. An optional stand extension is available to suit longer lathes or woodturning lathes with extension beds.
This is an excellent heavy duty lathe stand. ©
Designed to be free-standing the legs are splayed for maximum stability and to allow for ample foot room and feature height adjustable rubber coated feet for seating on uneven floors. The stand adjusts from 590mm to 946mm in length and from 615mm to 876mm in height. The height of the lathe stand can be adjusted in 25mm increments. An optional stand extension is available to suit longer lathes or woodturning lathes with extension beds.
This is an excellent heavy duty lathe stand. ©
This is a very heavy duty woodturning lathe stand that should not be confused with the array of low cost lookalikes. The stand is manufactured from hardened, heavy gauge steel pressings which have been stitch welded together to create immense strength. These tubular sections are finished in an epoxy powder coated paint that is resistant to the knocks and bumps associated with a busy workshop.
Designed to be free-standing the legs are splayed for maximum stability and to allow for ample foot room and feature height adjustable rubber coated feet for seating on uneven floors. The stand adjusts from 590mm to 946mm in length and from 615mm to 876mm in height. The height of the lathe stand can be adjusted in 25mm increments. An optional stand extension is available to suit longer lathes or woodturning lathes with extension beds.
This is an excellent heavy duty lathe stand. ©
Designed to be free-standing the legs are splayed for maximum stability and to allow for ample foot room and feature height adjustable rubber coated feet for seating on uneven floors. The stand adjusts from 590mm to 946mm in length and from 615mm to 876mm in height. The height of the lathe stand can be adjusted in 25mm increments. An optional stand extension is available to suit longer lathes or woodturning lathes with extension beds.
This is an excellent heavy duty lathe stand. ©
Show more +
Specifications
Brand
Rutlands®
Length
590mm to 946mm
Height
615mm to 876mm
Height Adjustment
25mm Increments
Weight
22kg
Show more +
5.000
4
5
Customer Reviews
Reviews (4)
Write Review....
John Galloway
I was looking for a stand that would take my old Tyme lathe that I have owned from new. The lathe is still good with no wear in the headstock bearings, so I could not justify replacing it at the moment. Previously I have used a home-made wooden bench but this was taking up too much room in the workshop. Trying to match up old machinery with new accessories is often difficult ,especially as I had originally opted for a long bed on the lathe for spindle turning. As a result I was delighted to see this stand has the optional extension to take the elongated bed which I also purchased The quality of the build is outstanding with very heavy grade steel. The machining is very accurate and as a result is a very stable stand which does not move when the wood is out of balance. The feet are adjustable to account for inaccuracies in the floor and their synthetic rubber nature absorb any vibration. The pre-drilled holes to mount the lathe lined up easily but I did have one extra hole to drill for the headstock because one of the mounts on the Tyme lathe is asymetric. In particular I like the fact that this stand is height adjustable and I have set it higher than my original bench making wood turning much more comfortable for my ageing back .If I decide to opt for the excellent new Rutland lathe in the future I know that I now have a stand that will fit this as well . This is the best £200 I have spent on equipment for my wood working workshop.
Allan Hamlen
I have just purchased this lathe stand as my work bench that I have been using is well past it's sell by date.
The stand is perfect, as the height can be adjusted exactly to your preference height. Built solid and so tough it would hold just about any lathe. I have total confidence with this stand for my AT350WL 1416 woodturning lathe.
Great job Rutlands!
The stand is perfect, as the height can be adjusted exactly to your preference height. Built solid and so tough it would hold just about any lathe. I have total confidence with this stand for my AT350WL 1416 woodturning lathe.
Great job Rutlands!
Keith M
Very solid and heavy stand. Easy to assemble and adjustable height to suit. Feet adjust easily for levelling with a bolt and locking nut. Purchased as part of a lathe bundle with extension bed. Pleasantly surprised just how steady this base is.
Duncan Waters
Wow, really heavy duty and well built. Slight scuffs to the paintwork but apart from that very easy to assemble and rock solid in use. The adjustment holes allow you to sit the lathe at the correct working height. I previously had my lathe sat on a bench and did not realise until i set this new stand up that i was actually have to bend to turn. Now i don't have to arch and I think my working position is mush better. Took about 45 minutes to fully assemble, having realised that i put the leg feet the wrong way around. Should have read the instructions. Overall a very good stand that will outlast me.
Show more +
£149.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process