Premium Woodturning Lathe with Six Speeds, Reverse and Extension Bed
Premium Woodturning Lathe with Six Speeds, Reverse and Extension Bed
£599.99
inc. vat
Home > Woodturning > Lathes > Lathes > Lathe with Six Speeds & Reverse - 305 x 535mm > Premium Woodturning Lathe with Six Speeds, Reverse and Extension Bed

Key Features

  • 3 Year Warranty
    If the lathe fails due to a material or manufacturing defect the lathe or component will be replaced free of charge
  • Premium Performance Lathe
    Turn spindles up to 535mm and bowls up to 305mm
  • Extremely Quiet In Operation Even At Maximum Speed And Under Full Load
    Powered by a 550w high torque, induction motor
  • Six Speed Range
    460, 660, 1040, 1560, 2270 & 2900 rpm
  • Excellent Vibration Dampening
    Vibration is virtually eliminated due to the CNC machining of the cast headstock, tailstock and bed
  • Class-Leading Spindle Concentricity
    Drive spindle runs on extra wide, sealed for life roller bearings
  • Ergonomic Adjustment Handles
    Can be locked off in any position to prevent obstruction with the turning tool
  • Premium Lathe Extension Bed
    Machined from a solid grey iron casting
  • Epoxy Powder Coated
    To withstand the knocks and bumps of a busy workshop
  • Absorbs Vibration
    Two rubber feet absorb vibration for smooth controlled turning

Show more +

Bundles

Product Details

Premium Woodturning Lathe with Six Speeds and Reverse - 305mm x 535mm
This premium performance lathe is designed for the discerning woodturner or more ambitious newcomer and should not be compared with low cost, budget lathes. The level of vibration on this lathe is exceptionally low, due to the substantial grey iron castings which have the mass needed to dampen and absorb vibration. The castings are CNC machined to exacting tolerances to ensure perfect alignment of the headstock and tailstock and to allow for the smooth movement of the tool rest holder and tailstock along the length of the bed.

The drive spindle is precisely aligned and runs in extra wide roller bearings to ensure class-leading concentricity. The drive spindle has a 1" x 8tpi thread with a No 2 morse taper for the fitting of industry standard chucks and attachments. The tailstock has No 2 morse taper which is hollowed out to accept drill bits when turning lampstands that require electric cable to be passed through. You can turn bowls up to 305mm and spindles up to 535mm , which can be extended to 1230mm with the optional bed extension. The lathe is powered by a 550w high torque, induction motor which is extremely quiet in use, even at maximum speed and under full load.

A non-slip, poly V belt, efficiently transmits power from the motor to the step pulleys, resulting in six spindle speeds of 460, 660, 1040, 1560, 2270 & 2900 rpm, allowing you to select the correct speed to suit small, medium and large turnings. To change speeds you simply raise the motor to slacken off the belt and then reposition the belt on a different step of the pulley. The reverse rotation is ideal for sanding and polishing when final finishing. The 150mm tool rest is held firmly in the non-slip banjo and will not wander when roughing out or turning large bowls and platters.

All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a revolving centre, four prong centre, face plate, knock out rod and spindle locking wrenches . This lathe is ideal for bowl and platter turning, goblet, vase and egg cup turning, pen turning and all between centres work. This is a precisely machined, premium performance lathe that is extremely quiet in operation, virtually vibration free and features six speeds. Three Year Warranty: If the lathe fails due to a material or manufacturing defect the lathe or component will be replaced free of charge.

Premium Woodturning Lathe Extension Bed
Designed specifically to fit the R2100 wood turning lathes, this extension will increase the spindle turning capacity of the lathe to 1230mm. Manufactured from cast iron the face and ends of the extension are precision CNC machined to ensure prefect alignment with the existing lathe bed. Simply join the two sections with the suppled allen head bolts. Once positioned the tailstock will slide up and down the bed ensuring perfect headstock and tailstock alignment. Two heavy duty rubber feet absorb and minimise vibration. Set up takes no more than a couple of minutes. ©
Premium Woodturning Lathe with Six Speeds and Reverse - 305mm x 535mm
This premium performance lathe is designed for the discerning woodturner or more ambitious newcomer and should not be compared with low cost, budget lathes. The level of vibration on this lathe is exceptionally low, due to the substantial grey iron castings which have the mass needed to dampen and absorb vibration. The castings are CNC machined to exacting tolerances to ensure perfect alignment of the headstock and tailstock and to allow for the smooth movement of the tool rest holder and tailstock along the length of the bed.

The drive spindle is precisely aligned and runs in extra wide roller bearings to ensure class-leading concentricity. The drive spindle has a 1" x 8tpi thread with a No 2 morse taper for the fitting of industry standard chucks and attachments. The tailstock has No 2 morse taper which is hollowed out to accept drill bits when turning lampstands that require electric cable to be passed through. You can turn bowls up to 305mm and spindles up to 535mm , which can be extended to 1230mm with the optional bed extension. The lathe is powered by a 550w high torque, induction motor which is extremely quiet in use, even at maximum speed and under full load.

A non-slip, poly V belt, efficiently transmits power from the motor to the step pulleys, resulting in six spindle speeds of 460, 660, 1040, 1560, 2270 & 2900 rpm, allowing you to select the correct speed to suit small, medium and large turnings. To change speeds you simply raise the motor to slacken off the belt and then reposition the belt on a different step of the pulley. The reverse rotation is ideal for sanding and polishing when final finishing. The 150mm tool rest is held firmly in the non-slip banjo and will not wander when roughing out or turning large bowls and platters.

All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a revolving centre, four prong centre, face plate, knock out rod and spindle locking wrenches . This lathe is ideal for bowl and platter turning, goblet, vase and egg cup turning, pen turning and all between centres work. This is a precisely machined, premium performance lathe that is extremely quiet in operation, virtually vibration free and features six speeds. Three Year Warranty: If the lathe fails due to a material or manufacturing defect the lathe or component will be replaced free of charge.

Premium Woodturning Lathe Extension Bed
Designed specifically to fit the R2100 wood turning lathes, this extension will increase the spindle turning capacity of the lathe to 1230mm. Manufactured from cast iron the face and ends of the extension are precision CNC machined to ensure prefect alignment with the existing lathe bed. Simply join the two sections with the suppled allen head bolts. Once positioned the tailstock will slide up and down the bed ensuring perfect headstock and tailstock alignment. Two heavy duty rubber feet absorb and minimise vibration. Set up takes no more than a couple of minutes. ©

Show more +

Specifications

Brand Rutlands®
r2111
R2100 Premium Woodturning Lathe with Six Speeds and Reverse
Power 550W
Voltage 230v
No. of Speeds 6
Speed Range 460, 660, 1040, 1560, 2270, 2900rpm
Diameter Over Bed 305mm
Distance Between Centres 535mm
Spindle Thread 1" x 8tpi
Taper Headstock No. 2 MT
Taper Tailstock No. 2 MT
Tailstock Barrel Travel 50mm
Tool Rest Stem Diameter 16mm
Tool Rest Length 150mm
Overall L x W x H 1008mm x 255mm x 401mm
Weight - R2100 35kg
R2109 Premium Woodturning Lathe Extension Bed
Lathe Distance Between Centres with Bed Extension 1230mm
Weight - R2109 12kg

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

Jeff Bean

Delighted with my new lathe. Technology has obviously moved on significantly, as this lathe is so much quieter and is vibration free in comparison to my previous Tyme lathe. The castings are nicely finished and all of the moving components just glide along the bed. Changing speeds is straight forward, you raise the motor lever, reposition the belt and then relax the motor. Reverse is great for adding wax and polish. This beauty will keep me happy for months to come.

Show more +

Premium Woodturning Lathe with Six Speeds, Reverse and Extension Bed

Rutlands®
Part No. R2112
£599.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >