Premium Woodturning Lathe with Variable Speed, Reverse, Precision 75 Chuck & Cryogenic HSS Tool Set
Premium Woodturning Lathe with Variable Speed, Reverse, Precision 75 Chuck & Cryogenic HSS Tool Set
£899.99
inc. vat
Home > Woodturning > Lathes > Lathes > Lathe with Variable Speed & Reverse - 305 x 610mm > Premium Woodturning Lathe with Variable Speed, Reverse, Precision 75 Chuck & Cryogenic HSS Tool Set

Key Features

  • 3 Year Warranty
    If the lathe fails due to a material or manufacturing defect the lathe or component will be replaced free of charge
  • Premium Performance Large Capacity Lathe
    Turn spindles up to 610mm and bowls up to 305mm
  • Ultra Quiet Operation
    Powered by a 750w high torque, low noise, DC motor
  • Electronic Variable Speed Control
    Fine tune the speed to suit small, medium and large turnings
  • LED Digital Speed Display
    Large digital speed read out is perfectly positioned for visibility
  • Excellent Vibration Dampening
    Vibration is virtually eliminated due to the CNC machining of the cast headstock, tailstock and bed
  • Excellent Spindle Concentricity
    Drive spindle runs on extra wide, sealed for life roller bearings
  • Lifetime Turning Tool Warranty
    If any turning tool fails due to a material or manufacturing defect it will be replaced free of charge
  • Set of Six Full-Size M2 HSS Turning Tools
    Professionally turn both bowl and spindle projects including candlesticks, goblets, standard lamps, pepper pots, bowls, platters and pens
  • For Woodturners Who Prefer to Turn Wood Rather than Grind
    Superior edge holding ability in oily abrasive woods, exotic woods and hardwoods
  • Cryogenically Heat Treated M2 HSS Blades
    Results in an exceptionally long service life, up to 5 times longer than conventionally hardened HSS 4341 material
  • 10 Year Chuck Warranty
    If the precision chuck or jaws fail due to a material or manufacturing defect they will be replaced free of charge
  • The Latest Advancement in Work Holding Systems for Discerning Woodturners
    Precision engineered and beautifully balanced, it offers superior performance
  • Turn a Multitude of Projects
    Spindles, bowls, goblets, candlesticks, pepper mills, pens and unseasoned timber
  • Machined from Special Grade Medium-Tensile Steel
    Normally used for the manufacture of high performance turbo impellors, pistons and gears

Show more +

Bundles

Product Details

Premium Woodturning Lathe with Variable Speed and Reverse - 305mm x 610mm
This is an exceptional woodturning lathe. Compared to many other bench top lathes it has greater work holding capacity allowing for 305mm bowl turning and 610mm spindle turning and has the advantage that you can extend the bed at a later stage to increase spindle turning to 1300mm. It is powered by a high torque, DC motor which is extremely quiet in use, even at maximum speed and under full load.

A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The two step pulley, in conjunction with the variable speed control results in two speed ranges of 250 to 1300rpm and 700 to 3450rpm, allowing you to fine tune the speed to suit small, medium and large turnings. The digital read out is ideally positioned on the tailstock to offer perfect visibility. The level of vibration is remarkable low, due to the substantial grey iron castings which have the mass needed to dampen and absorb vibration. The cast iron headstock is CNC machined for the precise alignment of the drive spindle and the extra wide roller bearings, ensuring class leading concentricity.

The drive spindle has a 1" x 8tpi thread with a No 2 morse taper to allow for the fitting industry standard chucks and attachments. The tailstock has No 2 morse taper which is hollowed out to accept drill bits when turning standard and bed side lamps. The tool rest is held firmly in the non-slip banjo and will not wander when roughing out or turning large bowls and platters. The bed of the lathe is finely ground for smooth tool rest positioning. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool.

The lathe comes complete with a revolving centre, four prong centre, face plate, knock out rod and spindle locking wrenches . This lathe is ideal for bowl and platter turning, goblet, vase and egg cup turning, pen turning and all between centres work.

Precision 75 Woodturning Chuck
The new Precision 75 Woodturning Chuck is engineered to ensure that the workpiece sits as close as possible to the headstock, therefore reducing load and minimizing wear on the main spindle bearing. This chuck is extremely strong and durable, as it is machined from a special grade of medium-tensile steel, which is normally used for the manufacture of high performance turbo impellors, pistons and gears. It is the latest advancement in work holding systems for discerning woodturners and comes with a 10 year warranty. Precision engineered and beautifully balanced, it offers superior performance combined with rock-solid holding power and excellent load bearing capability.

The chuck kit contains the Precision 75 chuck body, 50mm dovetail jaws, 65mm faceplate ring, 35mm pin jaws and screw chuck. This wide array of jaws allows for all popular turning projects including; spindles, bowls, goblets, candlesticks, pepper mills, pens and pencils up to 20kg and more. The chuck and jaws are presented in a box set, which features a dedicated foam cut out to aid protection when not in use.

Premium Cryogenic M2 HSS Woodturning Tools - Set of 6
This premium set of Cryogenic M2 HSS turning tools features six full-size tools allowing for the professional turning of both bowl and spindle projects including candlesticks, goblets, standard lamps, pepper pots, bowls, platters and pens. Beautifully presented in a wooden case, this set comprises of a 1" roughing gouge for taking the corners off square stock, to make it round, 3/4" oval skew chisel for creating a smooth cylindrical finish, 3/8" spindle gouge for adding detail, such as coves and beads, 1/8" diamond parting tool for cutting deep grooves or releasing finished work from a waste wood base, 1/2" bowl gouge for the hollowing out of goblets and bowls and a 3/4" square nose scraper to give perfectly flat bottoms to the insides of bowls.

These premium turning tools are made from M2 high-speed steel which has been cryogenically hardened, to ensure an extremely long service life. Cryogenic hardening is a technical process, where the steel is cooled down to -185°C after hardening, resulting in an edge that will last up to 5 times longer than conventionally hardened high-speed steel. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the high-speed steel blades are buried deep into the beech handles and secured by a solid stainless steel ferrule. These are excellent full-size woodturning tools. ©
Premium Woodturning Lathe with Variable Speed and Reverse - 305mm x 610mm
This is an exceptional woodturning lathe. Compared to many other bench top lathes it has greater work holding capacity allowing for 305mm bowl turning and 610mm spindle turning and has the advantage that you can extend the bed at a later stage to increase spindle turning to 1300mm. It is powered by a high torque, DC motor which is extremely quiet in use, even at maximum speed and under full load.

A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The two step pulley, in conjunction with the variable speed control results in two speed ranges of 250 to 1300rpm and 700 to 3450rpm, allowing you to fine tune the speed to suit small, medium and large turnings. The digital read out is ideally positioned on the tailstock to offer perfect visibility. The level of vibration is remarkable low, due to the substantial grey iron castings which have the mass needed to dampen and absorb vibration. The cast iron headstock is CNC machined for the precise alignment of the drive spindle and the extra wide roller bearings, ensuring class leading concentricity.

The drive spindle has a 1" x 8tpi thread with a No 2 morse taper to allow for the fitting industry standard chucks and attachments. The tailstock has No 2 morse taper which is hollowed out to accept drill bits when turning standard and bed side lamps. The tool rest is held firmly in the non-slip banjo and will not wander when roughing out or turning large bowls and platters. The bed of the lathe is finely ground for smooth tool rest positioning. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool.

The lathe comes complete with a revolving centre, four prong centre, face plate, knock out rod and spindle locking wrenches . This lathe is ideal for bowl and platter turning, goblet, vase and egg cup turning, pen turning and all between centres work.

Precision 75 Woodturning Chuck
The new Precision 75 Woodturning Chuck is engineered to ensure that the workpiece sits as close as possible to the headstock, therefore reducing load and minimizing wear on the main spindle bearing. This chuck is extremely strong and durable, as it is machined from a special grade of medium-tensile steel, which is normally used for the manufacture of high performance turbo impellors, pistons and gears. It is the latest advancement in work holding systems for discerning woodturners and comes with a 10 year warranty. Precision engineered and beautifully balanced, it offers superior performance combined with rock-solid holding power and excellent load bearing capability.

The chuck kit contains the Precision 75 chuck body, 50mm dovetail jaws, 65mm faceplate ring, 35mm pin jaws and screw chuck. This wide array of jaws allows for all popular turning projects including; spindles, bowls, goblets, candlesticks, pepper mills, pens and pencils up to 20kg and more. The chuck and jaws are presented in a box set, which features a dedicated foam cut out to aid protection when not in use.

Premium Cryogenic M2 HSS Woodturning Tools - Set of 6
This premium set of Cryogenic M2 HSS turning tools features six full-size tools allowing for the professional turning of both bowl and spindle projects including candlesticks, goblets, standard lamps, pepper pots, bowls, platters and pens. Beautifully presented in a wooden case, this set comprises of a 1" roughing gouge for taking the corners off square stock, to make it round, 3/4" oval skew chisel for creating a smooth cylindrical finish, 3/8" spindle gouge for adding detail, such as coves and beads, 1/8" diamond parting tool for cutting deep grooves or releasing finished work from a waste wood base, 1/2" bowl gouge for the hollowing out of goblets and bowls and a 3/4" square nose scraper to give perfectly flat bottoms to the insides of bowls.

These premium turning tools are made from M2 high-speed steel which has been cryogenically hardened, to ensure an extremely long service life. Cryogenic hardening is a technical process, where the steel is cooled down to -185°C after hardening, resulting in an edge that will last up to 5 times longer than conventionally hardened high-speed steel. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the high-speed steel blades are buried deep into the beech handles and secured by a solid stainless steel ferrule. These are excellent full-size woodturning tools. ©

Show more +

Specifications

Brand Rutlands®
R2103 Premium Woodturning Lathe with Variable Speed and Reverse
Power 750W
Voltage 230v
Variable Speed Range 2
Variable Speeds 250-1300rpm and 700-3450rpm
Diameter Over Bed 305mm
Distance Between Centres 610mm
Distance Between Centres with Optional Bed Extension 1300mm
Spindle Thread 1" x 8tpi
Taper Headstock No. 2 MT
Taper Tailstock No. 2 MT
Tailstock Barrel Travel 60mm
Tool Rest Stem Diameter 16mm
Tool Rest Length 150mm
Overall L x W x H 1078mm x 255mm x 401mm
Weight - R2103 39kg
R2500 Precision 75 Woodturning Chuck Kit
Chuck Body Diameter 70mm
Dovetail Jaws Compression Grip 40mm - 28mm
Dovetail Jaws Expansion Grip 38mm - 50mm
Pin Jaws Compression Grip 20mm - 8mm
Pin Jaws Expansion Grip 23mm - 35mm
Faceplate Ring 65mm
Woodscrew Chuck 30mm
R2020 Premium Cryogenic M2 HSS Woodturning Tools - Set of 6
Handle Lengths 320mm
Blade Lengths 130mm to 220mm
Overall Lengths 450 to 540mm
Steel M2 High-Speed Steel
Handle Beech
Rockwell Hardness HRC63-77
Contents Part No. R2005, R2009, R2011, R2014, R2015 & R2017
Roughing Gouge Blade Width 1"
Roughing Gough Flute Width 3/4"
Bowl Gouge Blade Width 1/2"
Bowl Gouge Flute Width 3/8"
Gouge Blade Width 3/8"
Spindle Gouge Flute Width 1/4"

Show more +
5.000 3 5

Customer Reviews

Reviews (3)
Write Review....

Paul Walsh

This lathe lives up to its specification. I have used a number of brands of lathe in my tutors workshop ( he has 9 different lathes) and I can honestly say that this is the smoothest running lathe I have come across. You don't even need to mount it down, it seems to have no vibration. Without and adjustments the headstock and tailstock lined up perfectly. It's great - what more can I say. Rutlands should make a video of it to show how smooth it is.

George Lloyd

I was impressed from the moment I started to unbox this lathe. It was extremely well packed in a polystyrene mould, there were no chips or damage to the paint surface and all I had to do was plug and go. I have had two other lathes in the past and neither compare to this. It is remarkably quiet and simply purrs when you turn the speed dial. I balanced a penny coin on the headstock, that's how smooth it is. It is in a different class to any other lathe I have owned. It looks very similar to the Rikon lathe sold in America. I have turned a couple of bowls out of Bubinga and I am delighted with the finish. It really is an excellent lathe.

John Bilson

An absolute gem of a lathe. It runs extremely quietly and there is simply no vibration through the castings. It is in a different league to my old Tyme Cub lathe. Turned a bowl form a Bubinga blank that was way out of true and the lathe did not stall or slow when initially roughing out. It seemed to relish the challenge. Highly impressed.

Show more +

Premium Woodturning Lathe with Variable Speed, Reverse, Precision 75 Chuck & Cryogenic HSS Tool Set

Rutlands®
Part No. R2118
£899.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >