Premium Woodturning Lathe with Variable Speed, Reverse and Extension Bed
£899.99
inc. vat
Home > Woodturning > Lathes > Lathes > Lathe with Variable Speed & Reverse - 355 x 510mm > Premium Woodturning Lathe with Variable Speed, Reverse and Extension Bed
Key Features
- 3 Year Warranty
If the lathe fails due to a material or manufacturing defect the lathe or component will be replaced free of charge - Premium Performance Heavy Duty Lathe
Turn spindles up to 510mm and bowls up to 355mm - Ultra Quiet Operation
Powered by a 750w high torque, reversible , DC brush motor - Electronic Variable Speed Control
Fine tune the speed to suit small, medium and large turnings - Motor Controller Automatically Increases The Level Of Torque
Maintains rotational speed, as load on the workpiece is increased - Whisper Quiet In Use
Even at maximum speed and under full load - LED Digital Read-Out
Helps control your work and is ideally position on the tailstock to offer perfect visibility - Reverse Rotation
Ideal for sanding and polishing when final finishing - Excellent Vibration Dampening
Vibration is virtually eliminated due to the CNC machining of the cast headstock, tailstock and bed - Premium Lathe Extension Bed
Machined from a solid grey iron casting - Epoxy Powder Coated
To withstand the knocks and bumps of a busy workshop - Absorbs Vibration
Two rubber feet absorb vibration for smooth controlled turning
Bundles
Product Details
Premium Woodturning Lathe with Variable Speed and Reverse - 355mm x 510mm
This premium performance lathe is favoured by both professional and discerning home woodturners, as it features class-leading levels of concentricity, electronic variable speed control, reverse action, an ultra quiet DC motor and a vibration dampening system. Weighing in at 57kg, the vibration level on this lathe is exceptionally low, due to the heavy duty grey iron castings which have the mass needed to dampen and absorb vibration. The castings are CNC machined to exacting tolerances to ensure perfect alignment of the headstock and tailstock and the bed is CNC machined and brush finished to allow for smooth movement of the banjo and tailstock.
The drive spindle is precisely aligned and runs in large roller bearings to ensure class-leading concentricity. The drive spindle has a M33 x 3.5mm thread with a No 2 morse taper to accept industry standard chucks and fitments. The tailstock has No 2 morse taper which is hollowed out to accept drill bits when turning lampstands that require electric cable to be passed through. You can turn bowls up to 355mm and spindles up to 510mm.
The lathe is powered by a high torque, DC brush motor which is whisper quiet in use, even at maximum speed and under full load. A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The step pulleys, in conjunction with the variable speed control results in three speed ranges of 250 to 720rpm, 600 to 1700rpm and 1200 to 3550rpm, enabling fine tuning of speed to suit delicate work, larger diameters and out of balance work pieces. The LED digital read-out of the spindle speed helps control your work and is positioned on the tailstock to offer perfect visibility. The reverse rotation is ideal for sanding and polishing when final finishing.
The 24 stop indexing facility, features a spring loaded indent pin to securely lock the spindle into position which is an invaluable aid in laying out equally-spaced lines on a turning. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a revolving centre, four prong centre, face plate,tool holder knock out rod and spindle locking wrenches . This lathe is ideal for turning bowls, platters, goblets, vases, egg cups , pens, lamp stands. This is a premium build lathe, which will give years of vibration free, quiet, powerful and controlled turning.
Premium Woodturning Lathe Extension Bed
Designed specifically to fit the R2106 wood turning lathe, this extension will increase the spindle turning capacity of the lathe to 1120mm. Manufactured from cast iron the face and ends of the extension are precision CNC machined to ensure prefect alignment with the existing lathe bed. Simply join the two sections with the suppled allen head bolts. Once positioned the tailstock will slide up and down the bed ensuring perfect headstock and tailstock alignment. Two heavy duty rubber feet absorb and minimise vibration. Set up takes no more than a couple of minutes. ©
This premium performance lathe is favoured by both professional and discerning home woodturners, as it features class-leading levels of concentricity, electronic variable speed control, reverse action, an ultra quiet DC motor and a vibration dampening system. Weighing in at 57kg, the vibration level on this lathe is exceptionally low, due to the heavy duty grey iron castings which have the mass needed to dampen and absorb vibration. The castings are CNC machined to exacting tolerances to ensure perfect alignment of the headstock and tailstock and the bed is CNC machined and brush finished to allow for smooth movement of the banjo and tailstock.
The drive spindle is precisely aligned and runs in large roller bearings to ensure class-leading concentricity. The drive spindle has a M33 x 3.5mm thread with a No 2 morse taper to accept industry standard chucks and fitments. The tailstock has No 2 morse taper which is hollowed out to accept drill bits when turning lampstands that require electric cable to be passed through. You can turn bowls up to 355mm and spindles up to 510mm.
The lathe is powered by a high torque, DC brush motor which is whisper quiet in use, even at maximum speed and under full load. A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The step pulleys, in conjunction with the variable speed control results in three speed ranges of 250 to 720rpm, 600 to 1700rpm and 1200 to 3550rpm, enabling fine tuning of speed to suit delicate work, larger diameters and out of balance work pieces. The LED digital read-out of the spindle speed helps control your work and is positioned on the tailstock to offer perfect visibility. The reverse rotation is ideal for sanding and polishing when final finishing.
The 24 stop indexing facility, features a spring loaded indent pin to securely lock the spindle into position which is an invaluable aid in laying out equally-spaced lines on a turning. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a revolving centre, four prong centre, face plate,tool holder knock out rod and spindle locking wrenches . This lathe is ideal for turning bowls, platters, goblets, vases, egg cups , pens, lamp stands. This is a premium build lathe, which will give years of vibration free, quiet, powerful and controlled turning.
Premium Woodturning Lathe Extension Bed
Designed specifically to fit the R2106 wood turning lathe, this extension will increase the spindle turning capacity of the lathe to 1120mm. Manufactured from cast iron the face and ends of the extension are precision CNC machined to ensure prefect alignment with the existing lathe bed. Simply join the two sections with the suppled allen head bolts. Once positioned the tailstock will slide up and down the bed ensuring perfect headstock and tailstock alignment. Two heavy duty rubber feet absorb and minimise vibration. Set up takes no more than a couple of minutes. ©
Premium Woodturning Lathe with Variable Speed and Reverse - 355mm x 510mm
This premium performance lathe is favoured by both professional and discerning home woodturners, as it features class-leading levels of concentricity, electronic variable speed control, reverse action, an ultra quiet DC motor and a vibration dampening system. Weighing in at 57kg, the vibration level on this lathe is exceptionally low, due to the heavy duty grey iron castings which have the mass needed to dampen and absorb vibration. The castings are CNC machined to exacting tolerances to ensure perfect alignment of the headstock and tailstock and the bed is CNC machined and brush finished to allow for smooth movement of the banjo and tailstock.
The drive spindle is precisely aligned and runs in large roller bearings to ensure class-leading concentricity. The drive spindle has a M33 x 3.5mm thread with a No 2 morse taper to accept industry standard chucks and fitments. The tailstock has No 2 morse taper which is hollowed out to accept drill bits when turning lampstands that require electric cable to be passed through. You can turn bowls up to 355mm and spindles up to 510mm.
The lathe is powered by a high torque, DC brush motor which is whisper quiet in use, even at maximum speed and under full load. A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The step pulleys, in conjunction with the variable speed control results in three speed ranges of 250 to 720rpm, 600 to 1700rpm and 1200 to 3550rpm, enabling fine tuning of speed to suit delicate work, larger diameters and out of balance work pieces. The LED digital read-out of the spindle speed helps control your work and is positioned on the tailstock to offer perfect visibility. The reverse rotation is ideal for sanding and polishing when final finishing.
The 24 stop indexing facility, features a spring loaded indent pin to securely lock the spindle into position which is an invaluable aid in laying out equally-spaced lines on a turning. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a revolving centre, four prong centre, face plate,tool holder knock out rod and spindle locking wrenches . This lathe is ideal for turning bowls, platters, goblets, vases, egg cups , pens, lamp stands. This is a premium build lathe, which will give years of vibration free, quiet, powerful and controlled turning.
Premium Woodturning Lathe Extension Bed
Designed specifically to fit the R2106 wood turning lathe, this extension will increase the spindle turning capacity of the lathe to 1120mm. Manufactured from cast iron the face and ends of the extension are precision CNC machined to ensure prefect alignment with the existing lathe bed. Simply join the two sections with the suppled allen head bolts. Once positioned the tailstock will slide up and down the bed ensuring perfect headstock and tailstock alignment. Two heavy duty rubber feet absorb and minimise vibration. Set up takes no more than a couple of minutes. ©
This premium performance lathe is favoured by both professional and discerning home woodturners, as it features class-leading levels of concentricity, electronic variable speed control, reverse action, an ultra quiet DC motor and a vibration dampening system. Weighing in at 57kg, the vibration level on this lathe is exceptionally low, due to the heavy duty grey iron castings which have the mass needed to dampen and absorb vibration. The castings are CNC machined to exacting tolerances to ensure perfect alignment of the headstock and tailstock and the bed is CNC machined and brush finished to allow for smooth movement of the banjo and tailstock.
The drive spindle is precisely aligned and runs in large roller bearings to ensure class-leading concentricity. The drive spindle has a M33 x 3.5mm thread with a No 2 morse taper to accept industry standard chucks and fitments. The tailstock has No 2 morse taper which is hollowed out to accept drill bits when turning lampstands that require electric cable to be passed through. You can turn bowls up to 355mm and spindles up to 510mm.
The lathe is powered by a high torque, DC brush motor which is whisper quiet in use, even at maximum speed and under full load. A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The step pulleys, in conjunction with the variable speed control results in three speed ranges of 250 to 720rpm, 600 to 1700rpm and 1200 to 3550rpm, enabling fine tuning of speed to suit delicate work, larger diameters and out of balance work pieces. The LED digital read-out of the spindle speed helps control your work and is positioned on the tailstock to offer perfect visibility. The reverse rotation is ideal for sanding and polishing when final finishing.
The 24 stop indexing facility, features a spring loaded indent pin to securely lock the spindle into position which is an invaluable aid in laying out equally-spaced lines on a turning. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a revolving centre, four prong centre, face plate,tool holder knock out rod and spindle locking wrenches . This lathe is ideal for turning bowls, platters, goblets, vases, egg cups , pens, lamp stands. This is a premium build lathe, which will give years of vibration free, quiet, powerful and controlled turning.
Premium Woodturning Lathe Extension Bed
Designed specifically to fit the R2106 wood turning lathe, this extension will increase the spindle turning capacity of the lathe to 1120mm. Manufactured from cast iron the face and ends of the extension are precision CNC machined to ensure prefect alignment with the existing lathe bed. Simply join the two sections with the suppled allen head bolts. Once positioned the tailstock will slide up and down the bed ensuring perfect headstock and tailstock alignment. Two heavy duty rubber feet absorb and minimise vibration. Set up takes no more than a couple of minutes. ©
Show more +
Specifications
Brand
Rutlands®
R2106
Premium Woodturning Lathe with Variable Speed and Reverse
Power
750W
Voltage
230v
Variable Speed Ranges
3
Variable Speeds
250-720rpm, 600-1700rpm and 1200-3550rpm
Diameter Over Bed
355mm
Distance Between Centres
510mm
Spindle Thread
M33 x 3.5mm
Taper Headstock
No. 2 MT
Taper Tailstock
No. 2 MT
Tailstock Barrel Travel
70mm
Tool Rest Stem Diameter
25.4mm
Overall L x W x H
1050mm x 400mm x 480mm
Weight - R2106
57kg
R2110
Premium Woodturning Lathe Extension Bed
Lathe Distance Between Centres with Bed Extension
1120mm
Weight
15kg
Show more +
5.000
1
5
Customer Reviews
Reviews (1)
Write Review....
Paul Jones
I am delighted with this lathe. It is much bigger in the flesh than it looks on the website. It was delivered in two large boxes and needed both the driver and myself to carry each box to my workshop. Assembly was straight forward as one box contains the headstock, motor and tailstock and the other box has the bed and fitments. At near on 60kg it sits rock solid on my bench, with no vibration what so ever. It just hums quietly along. I turned a 14" x 3" bowl out of Bubinga and even when initially roughing out the spindle speed did not slow at all. Would i buy again - without hesitation.
Show more +
Premium Woodturning Lathe with Variable Speed, Reverse and Extension Bed
Rutlands®
Part No. R2120
£899.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process