Premium Woodturning Lathe and Stand
£549.99
inc. vat
Key Features
- Lifetime Warranty
If the lathe or stand fails due to a material or manufacturing defect the component will be replaced free of charge - Premium Performance Woodturning Lathe
Precision machined for accuracy from substantial grey iron castings - Ultra Quiet Operation
Powered by a high torque, low noise, induction motor - Electronic Variable Speed Control
Allows for fine tuning of speed to suit small, medium, large and out of balance workpieces - LED Digital Speed Display
The large digital speed read out is perfectly positioned for visibility on the headstock - Excellent Vibration Dampening
Vibration is virtually eliminated due to the precision machining of the cast iron headstock - Perfect Spindle Concentricity
Fine, delicate and precise turnings can be achieved due to the CNC machined, steel drive spindle - Heavy Duty Woodturning Lathe Stand
Made from heavy gauge hardened steel - Stitch Welded for Strength
Absorbs the weight of solid cast lathes - Epoxy Powder Painted
Takes the knocks and bumps associated with a busy workshop
Bundles
This Item: Premium Woodturning Lathe and Stand
£549.99
Product Details
This is an exceptional woodturning lathe and stand package. Compared to many other bench top lathes it has greater work holding capacity allowing for 305mm bowl turning and 457mm spindle turning and has the advantage that you can extend the bed at a later stage to increase spindle turning to over 1000mm.
The lathe is powered by a high torque, induction motor which is extremely quiet in use, even at maximum speed and under full load. A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The drive belt is moved to one of the three steps on the pulley and then the variable speed control knob is rotated, to dial in to a precise speed (450 to 1100rpm, 960 to 2400rpm or 1400 to 3500rpm).
The digital read out is ideally positioned on the top of the headstock to offer perfect visibility. The level of vibration is remarkably low, due to the substantial grey iron castings which have the mass needed to dampen and absorb vibration. The cast iron headstock is CNC machined for the precise alignment of the drive spindle and steel roller bearings, ensuring class leading concentricity. The drive spindle has a 1" x 8tpi thread with a no 2 morse taper to allow for the fitting of industry standard chucks and attachments. The tailstock has no 2 morse taper which is hollowed out to 10mm diameter to allow for the drilling of spindles for accepting electric cable when making standard and bed side lamps.
The extra long 200mm tool rest reduces the need for frequent repositioning and is held firmly in the non-slip banjo with a 25.4mm diameter stem. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a tool holder, revolving centre, four prong centre, 70mm face plate, spindle locking wrenches and a set of extra long bolts to fit the lathe to the premium lathe stand. This lathe is ideal for bowl and platter turning, goblet, vase and egg cup turning, pen turning and all between centres work.
The lathe stand that should not be confused with the array of low cost lookalikes. The stand is manufactured from hardened, heavy gauge steel pressings which have been stitch welded together to create immense strength. These tubular sections are finished in an epoxy powder coated paint that is resistant to the knocks and bumps associated with a busy workshop. Designed to be free-standing the legs are splayed for maximum stability and to allow for ample foot room and feature height adjustable rubber coated feet for seating on uneven floors. The stand adjusts from 590mm to 946mm in length and from 615mm to 876mm in height. The height of the lathe stand can be adjusted in 25mm increments.
This package contains the premium woodturning lathe with the premium lathe stand. ©
The lathe is powered by a high torque, induction motor which is extremely quiet in use, even at maximum speed and under full load. A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The drive belt is moved to one of the three steps on the pulley and then the variable speed control knob is rotated, to dial in to a precise speed (450 to 1100rpm, 960 to 2400rpm or 1400 to 3500rpm).
The digital read out is ideally positioned on the top of the headstock to offer perfect visibility. The level of vibration is remarkably low, due to the substantial grey iron castings which have the mass needed to dampen and absorb vibration. The cast iron headstock is CNC machined for the precise alignment of the drive spindle and steel roller bearings, ensuring class leading concentricity. The drive spindle has a 1" x 8tpi thread with a no 2 morse taper to allow for the fitting of industry standard chucks and attachments. The tailstock has no 2 morse taper which is hollowed out to 10mm diameter to allow for the drilling of spindles for accepting electric cable when making standard and bed side lamps.
The extra long 200mm tool rest reduces the need for frequent repositioning and is held firmly in the non-slip banjo with a 25.4mm diameter stem. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a tool holder, revolving centre, four prong centre, 70mm face plate, spindle locking wrenches and a set of extra long bolts to fit the lathe to the premium lathe stand. This lathe is ideal for bowl and platter turning, goblet, vase and egg cup turning, pen turning and all between centres work.
The lathe stand that should not be confused with the array of low cost lookalikes. The stand is manufactured from hardened, heavy gauge steel pressings which have been stitch welded together to create immense strength. These tubular sections are finished in an epoxy powder coated paint that is resistant to the knocks and bumps associated with a busy workshop. Designed to be free-standing the legs are splayed for maximum stability and to allow for ample foot room and feature height adjustable rubber coated feet for seating on uneven floors. The stand adjusts from 590mm to 946mm in length and from 615mm to 876mm in height. The height of the lathe stand can be adjusted in 25mm increments.
This package contains the premium woodturning lathe with the premium lathe stand. ©
This is an exceptional woodturning lathe and stand package. Compared to many other bench top lathes it has greater work holding capacity allowing for 305mm bowl turning and 457mm spindle turning and has the advantage that you can extend the bed at a later stage to increase spindle turning to over 1000mm.
The lathe is powered by a high torque, induction motor which is extremely quiet in use, even at maximum speed and under full load. A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The drive belt is moved to one of the three steps on the pulley and then the variable speed control knob is rotated, to dial in to a precise speed (450 to 1100rpm, 960 to 2400rpm or 1400 to 3500rpm).
The digital read out is ideally positioned on the top of the headstock to offer perfect visibility. The level of vibration is remarkably low, due to the substantial grey iron castings which have the mass needed to dampen and absorb vibration. The cast iron headstock is CNC machined for the precise alignment of the drive spindle and steel roller bearings, ensuring class leading concentricity. The drive spindle has a 1" x 8tpi thread with a no 2 morse taper to allow for the fitting of industry standard chucks and attachments. The tailstock has no 2 morse taper which is hollowed out to 10mm diameter to allow for the drilling of spindles for accepting electric cable when making standard and bed side lamps.
The extra long 200mm tool rest reduces the need for frequent repositioning and is held firmly in the non-slip banjo with a 25.4mm diameter stem. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a tool holder, revolving centre, four prong centre, 70mm face plate, spindle locking wrenches and a set of extra long bolts to fit the lathe to the premium lathe stand. This lathe is ideal for bowl and platter turning, goblet, vase and egg cup turning, pen turning and all between centres work.
The lathe stand that should not be confused with the array of low cost lookalikes. The stand is manufactured from hardened, heavy gauge steel pressings which have been stitch welded together to create immense strength. These tubular sections are finished in an epoxy powder coated paint that is resistant to the knocks and bumps associated with a busy workshop. Designed to be free-standing the legs are splayed for maximum stability and to allow for ample foot room and feature height adjustable rubber coated feet for seating on uneven floors. The stand adjusts from 590mm to 946mm in length and from 615mm to 876mm in height. The height of the lathe stand can be adjusted in 25mm increments.
This package contains the premium woodturning lathe with the premium lathe stand. ©
The lathe is powered by a high torque, induction motor which is extremely quiet in use, even at maximum speed and under full load. A non-slip poly V belt efficiently transmits power from the motor whilst the motor controller automatically increases the level of torque to maintain the speed, as load on the workpiece is increased. The drive belt is moved to one of the three steps on the pulley and then the variable speed control knob is rotated, to dial in to a precise speed (450 to 1100rpm, 960 to 2400rpm or 1400 to 3500rpm).
The digital read out is ideally positioned on the top of the headstock to offer perfect visibility. The level of vibration is remarkably low, due to the substantial grey iron castings which have the mass needed to dampen and absorb vibration. The cast iron headstock is CNC machined for the precise alignment of the drive spindle and steel roller bearings, ensuring class leading concentricity. The drive spindle has a 1" x 8tpi thread with a no 2 morse taper to allow for the fitting of industry standard chucks and attachments. The tailstock has no 2 morse taper which is hollowed out to 10mm diameter to allow for the drilling of spindles for accepting electric cable when making standard and bed side lamps.
The extra long 200mm tool rest reduces the need for frequent repositioning and is held firmly in the non-slip banjo with a 25.4mm diameter stem. All of the adjustment handles are ergonomic and can be locked off to prevent obstruction with the turning tool. The lathe comes complete with a tool holder, revolving centre, four prong centre, 70mm face plate, spindle locking wrenches and a set of extra long bolts to fit the lathe to the premium lathe stand. This lathe is ideal for bowl and platter turning, goblet, vase and egg cup turning, pen turning and all between centres work.
The lathe stand that should not be confused with the array of low cost lookalikes. The stand is manufactured from hardened, heavy gauge steel pressings which have been stitch welded together to create immense strength. These tubular sections are finished in an epoxy powder coated paint that is resistant to the knocks and bumps associated with a busy workshop. Designed to be free-standing the legs are splayed for maximum stability and to allow for ample foot room and feature height adjustable rubber coated feet for seating on uneven floors. The stand adjusts from 590mm to 946mm in length and from 615mm to 876mm in height. The height of the lathe stand can be adjusted in 25mm increments.
This package contains the premium woodturning lathe with the premium lathe stand. ©
Show more +
Specifications
Brand
Rutlands
Power
550W
Voltage
230V
Lathe Variable Speed
450 - 3500rpm
Distance Between Centres
457mm
Distance with Optional Bed Extension
1050mm
Maximum Diameter Over Bed
305mm
Tailstock Bore
10mm
Taper Headstock
No 2 Morse Taper
Spindle Thread
1"x 8tpi
Tool Rest Stem Diameter
25.4mm
No 2 Morse Taper
No 2 Morse Taper
Overall L x W x H
960mm x 247mm x 413mm
Cast Base Size L x W
762mm x 188mm
Weight
30kg
Show more +
0
5
Customer Reviews
Reviews (0)
Write Review....
£549.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £14.99
- Saturday Next Day UK - £14.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process