Premium K10 Carbide Hollowing Tools - Set of 3
Premium K10 Carbide Hollowing Tools - Set of 3
£139.99
inc. vat
Home > Woodturning > Turning Tools > K10 Carbide Hollowing Tool Sets > Premium K10 Carbide Hollowing Tools - Set of 3

Key Features

  • Lifetime Warranty
    If any turning tool fails due to a material or manufacturing defect it will be replaced free of charge
  • Set Comprises of Three Full-Size K10 Carbide Hollowing Tools
    Straight, gentle curve and sharp curve profiles
  • Easy to Control and Use Tools
    Allows you to focus on the shape of the turning rather than on the tool
  • Designed for Hollowing Out and Delicate Finishing Cuts
    Remove the inner bulk of the bowl before fine finishing the hard to reach inner walls and rim
  • Always the Correct Angle of Cut to the Bowl
    The wide flat face of the blade sits flush against the tool rest and presents the cutter at the correct angle to the workpiece
  • Circular Blades are Manufactured from K10 Carbide
    Extremely hardwearing, retaining its edge for longer when working with hard and exotic woods
  • Shafts are Made from Stainless Steel
    Highly durable and will not rust when in contact with wet or acidic wood
  • Beautiful Full-Size Beech Handles with a Stainless Steel Ferrule
    Hand selected straight-grain beech to ensure incredible strength
  • Perfect Hold
    Large, ergonomic handles ensure optimum tool control and a perfect balance

Show more +

Product Details

This set comprises of three full-size K10 carbide hollowing tools with straight, gentle curve and sharp curve profiles. These new hollowing tools are very easy to control and allow you to focus on the shape of the turning rather than on the tool. They are suitable for both roughing out and delicate finishing cuts. The wide flat face of the blade shaft sits flush against the tool rest, automatically presenting the cutter at the correct angle to the workpiece. The 9mm diameter circular blade is manufactured from K10 Carbide, which is extremely hardwearing, retaining its edge for longer even when working with hard and exotic woods. The blades are bevelled and will not clog in wet or resinous woods, ensuring a smooth and consistent finish to the workpiece. When the blade shows signs of wear simply rotate it around to an unused section to create a fresh edge.

The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.

The straight shafted hollower features a tapered cross section to allow for clearance of swarf when initially hollowing out, ensuring super fast operation and a smooth finish. It is used for the initial hollowing out of bowls prior to using the curve tools for clearing out sides and undercut areas of the bowl. It will leave a smooth, super fine finish to the inner bowl. The gentle curve hollower features a moderate gooseneck curvature to allow for clearing out of the inner sides of a bowl. It is commonly used after the initial hollowing out of bowls has been carried out with the straight hollower. It will leave a smooth, super fine finish to the inner bowl. The sharp curve hollower features a pronounced gooseneck curve designed for reaching into sharply undercut areas of the rim of the bowl. It is normally used as the final hollowing out tool, as it can reach areas of the inner bowl that the other two hollower can not reach. It will leave a smooth, super fine finish to the inner bowl.

These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect.
This set comprises of three full-size K10 carbide hollowing tools with straight, gentle curve and sharp curve profiles. These new hollowing tools are very easy to control and allow you to focus on the shape of the turning rather than on the tool. They are suitable for both roughing out and delicate finishing cuts. The wide flat face of the blade shaft sits flush against the tool rest, automatically presenting the cutter at the correct angle to the workpiece. The 9mm diameter circular blade is manufactured from K10 Carbide, which is extremely hardwearing, retaining its edge for longer even when working with hard and exotic woods. The blades are bevelled and will not clog in wet or resinous woods, ensuring a smooth and consistent finish to the workpiece. When the blade shows signs of wear simply rotate it around to an unused section to create a fresh edge.

The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.

The straight shafted hollower features a tapered cross section to allow for clearance of swarf when initially hollowing out, ensuring super fast operation and a smooth finish. It is used for the initial hollowing out of bowls prior to using the curve tools for clearing out sides and undercut areas of the bowl. It will leave a smooth, super fine finish to the inner bowl. The gentle curve hollower features a moderate gooseneck curvature to allow for clearing out of the inner sides of a bowl. It is commonly used after the initial hollowing out of bowls has been carried out with the straight hollower. It will leave a smooth, super fine finish to the inner bowl. The sharp curve hollower features a pronounced gooseneck curve designed for reaching into sharply undercut areas of the rim of the bowl. It is normally used as the final hollowing out tool, as it can reach areas of the inner bowl that the other two hollower can not reach. It will leave a smooth, super fine finish to the inner bowl.

These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect.

Show more +

Specifications

Brand Rutlands
Handle Length 390mm
Blade Length 300mm
Overall Length 690mm
Contents Part No. R2022, R2023 & R2024

Show more +
0 5

Customer Reviews

Reviews (0)
Write Review....

Show more +

Premium K10 Carbide Hollowing Tools - Set of 3

Rutlands
Part No. R2034
£139.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >