K10 Carbide Hollowing Tool - Sharp Curve
£69.99
inc. vat
Home > Woodturning > Turning Tools > K10 Carbide Hollowing Tools > K10 Carbide Hollowing Tool - Sharp Curve
Key Features
- Lifetime Warranty
If any turning tool fails due to a material or manufacturing defect it will be replaced free of charge - Easy to Control and Use for Reaching into Sharply Undercut Areas of the Rim of the Bowl
Allows you to focus on the shape of the turning rather than on the tool - Designed for Both Roughing Out and Delicate Finishing Cuts
Remove the inner bulk of the bowl before fine finishing the inner walls - Always the Correct Angle of Cut to the Bowl
The flat face of the shaft sits flush against the tool rest and presents the cutter at the correct angle to the workpiece - Circular Blade is Manufactured from K10 Carbide
Extremely hardwearing, retaining its edge for longer when working with hard and exotic woods - Shafts are Made from Stainless Steel
Highly durable and will not rust when in contact with wet or acidic wood - Beautiful Full-Size Beech Handles with a Stainless Steel Ferrule
Hand selected straight-grain beech to ensure incredible strength - Perfect Hold
Large, ergonomic handles ensure optimum tool control and a perfect balance
Bundles
This Item: K10 Carbide Hollowing Tool - Sharp Curve
£69.99
Leather Apron
£89.99
Product Details
These new hollowing tools are very easy to control and allow you to focus on the shape of the turning rather than on the tool. They are suitable for both roughing out and delicate finishing cuts. The wide flat face of the blade shaft sits flush against the tool rest, automatically presenting the cutter at the correct angle to the workpiece. The 9mm diameter circular blade is manufactured from K10 carbide, which is extremely hardwearing, retaining its edge for longer even when working with hard and exotic woods. The blades are bevelled and will not clog in wet or resinous woods, ensuring a smooth and consistent finish to the workpiece. When the blade shows signs of wear simply rotate it around to an unused section to create a fresh edge.
The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.
This sharp curve hollower features a pronounced gooseneck curve designed for reaching into sharply undercut areas of the rim of the bowl. It is normally used as the final hollowing out tool, as it can reach areas of the inner bowl that the other two hollower can not reach. It will leave a smooth, super fine finish to the inner bowl. These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect. ©
The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.
This sharp curve hollower features a pronounced gooseneck curve designed for reaching into sharply undercut areas of the rim of the bowl. It is normally used as the final hollowing out tool, as it can reach areas of the inner bowl that the other two hollower can not reach. It will leave a smooth, super fine finish to the inner bowl. These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect. ©
These new hollowing tools are very easy to control and allow you to focus on the shape of the turning rather than on the tool. They are suitable for both roughing out and delicate finishing cuts. The wide flat face of the blade shaft sits flush against the tool rest, automatically presenting the cutter at the correct angle to the workpiece. The 9mm diameter circular blade is manufactured from K10 carbide, which is extremely hardwearing, retaining its edge for longer even when working with hard and exotic woods. The blades are bevelled and will not clog in wet or resinous woods, ensuring a smooth and consistent finish to the workpiece. When the blade shows signs of wear simply rotate it around to an unused section to create a fresh edge.
The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.
This sharp curve hollower features a pronounced gooseneck curve designed for reaching into sharply undercut areas of the rim of the bowl. It is normally used as the final hollowing out tool, as it can reach areas of the inner bowl that the other two hollower can not reach. It will leave a smooth, super fine finish to the inner bowl. These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect. ©
The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.
This sharp curve hollower features a pronounced gooseneck curve designed for reaching into sharply undercut areas of the rim of the bowl. It is normally used as the final hollowing out tool, as it can reach areas of the inner bowl that the other two hollower can not reach. It will leave a smooth, super fine finish to the inner bowl. These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect. ©
Show more +
Specifications
Brand
Rutlands®
Handle Length
390mm
Blade Length
180
Overall Length
570mm
Show more +
5.000
3
5
Customer Reviews
Reviews (3)
Write Review....
Yvonne Bolton
The best carbide tools ever so easy to use the balance is unbelievable I can't believe the quality of these tools for the price I tell anyone who will listen to look at rutland tools first before paying through the nose for brand names that are not a patch on rutland tools
Matt Hall
Indulge your inner gynaecologist by entering through tight openings and feeling round corners in the dark.
The 6mm scraping disc is not so large as to be overly aggressive and turning the tool handle anti-clockwise to present a few degrees below horizontal certainly helps reduce catches.
The unusual tool test location took some adjusting to but the results are efficient and easily controllable.
£60 seems a bit steep given the companion tool with the gentler curve is half price, but needs must when the devil drives!
The 6mm scraping disc is not so large as to be overly aggressive and turning the tool handle anti-clockwise to present a few degrees below horizontal certainly helps reduce catches.
The unusual tool test location took some adjusting to but the results are efficient and easily controllable.
£60 seems a bit steep given the companion tool with the gentler curve is half price, but needs must when the devil drives!
Tim Blackman
A superb tool which cuts faster and leaves a far superior finish than any of my other bowl gouges.
I have used it on all types of wood including oak, apple, cherry, sycamore and even pine. Going into end grain is no problem at all and it matters not one jot the size of the project from a 10" bowl down to a small eggcup.
Having the tool rest much further away (to only the wide flat surface on the rest) was a little un-nerving at first but the tool cuts smoothly without any tendency to grab feeling both safe and comfortable in use.
I have used it on all types of wood including oak, apple, cherry, sycamore and even pine. Going into end grain is no problem at all and it matters not one jot the size of the project from a 10" bowl down to a small eggcup.
Having the tool rest much further away (to only the wide flat surface on the rest) was a little un-nerving at first but the tool cuts smoothly without any tendency to grab feeling both safe and comfortable in use.
Show more +
£69.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process