K10 Carbide Spindle Tool - Round
£39.99
inc. vat
Home > Woodturning > Turning Tools > K10 Carbide Woodturning Tools > K10 Carbide Spindle Tools > K10 Carbide Spindle Tool - Round
Key Features
- Lifetime Warranty
If any turning tool fails due to a material or manufacturing defect it will be replaced free of charge - Extremely Easy to Master and Control
These carbide tip tools leave an incredibly smooth surface that requires minimal sanding - Round Tool is a Finishing Tool
For shaping and finishing the inside of bowls and goblets and for cutting coves into spindles - Always the Correct Angle of Cut
The flat face of the shaft sits flush against the tool rest and presents the cutter at the correct angle to the workpiece - Round Blade is Manufactured from K10 Carbide
Extremely hardwearing, retaining its edge for longer when working with hard and exotic woods - Shafts are Made from Stainless Steel
Highly durable and will not rust when in contact with wet or acidic wood - Beautiful Full-Size Beech Handles with a Stainless Steel Ferrule
Hand selected straight-grain beech to ensure incredible strength - Perfect Hold
Large, ergonomic handles ensure optimum tool control and a perfect balance
Product Details
Extremely easy to master and control these carbide tip tools leave an incredibly smooth surface that requires minimal sanding. Unlike conventional turning tools that require a sweeping movement to ensure a smooth cut, these tools simply require you to advance or retract the tip as you move the tools across the tool rest. The wide flat face of the shaft sits flush against the tool rest, automatically presenting the cutter at the correct angle to the workpiece. The 11mm diameter round blade is manufactured from K10 carbide, which is extremely hardwearing, retaining its edge for longer even when working with hard and exotic woods. The blades are bevelled and will not clog in wet or resinous woods, ensuring a smooth and consistent finish to the workpiece. When the blade shows signs of wear simply rotate it around to an unused section to create a fresh edge.
The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.
The round tool is primarily a finishing tool for shaping and finishing the inside of bowls and goblets and for cutting coves into spindles. It will leave a finished surface that is smooth, requiring minimal sanding. These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect. These are excellent full-size carbide tip woodturning tools. ©
The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.
The round tool is primarily a finishing tool for shaping and finishing the inside of bowls and goblets and for cutting coves into spindles. It will leave a finished surface that is smooth, requiring minimal sanding. These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect. These are excellent full-size carbide tip woodturning tools. ©
Extremely easy to master and control these carbide tip tools leave an incredibly smooth surface that requires minimal sanding. Unlike conventional turning tools that require a sweeping movement to ensure a smooth cut, these tools simply require you to advance or retract the tip as you move the tools across the tool rest. The wide flat face of the shaft sits flush against the tool rest, automatically presenting the cutter at the correct angle to the workpiece. The 11mm diameter round blade is manufactured from K10 carbide, which is extremely hardwearing, retaining its edge for longer even when working with hard and exotic woods. The blades are bevelled and will not clog in wet or resinous woods, ensuring a smooth and consistent finish to the workpiece. When the blade shows signs of wear simply rotate it around to an unused section to create a fresh edge.
The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.
The round tool is primarily a finishing tool for shaping and finishing the inside of bowls and goblets and for cutting coves into spindles. It will leave a finished surface that is smooth, requiring minimal sanding. These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect. These are excellent full-size carbide tip woodturning tools. ©
The shafts of the tools are made from stainless steel, which is extremely durable and will not rust when in contact with wet or acidic wood. The full-size handles are ergonomically designed to allow for optimum grip and comfort and are made from a slow growing beech that has been selected for its straight grain, to ensure maximum strength. The shanks of the blades are buried deep into the beech handles and secured by a solid stainless steel ferrule.
The round tool is primarily a finishing tool for shaping and finishing the inside of bowls and goblets and for cutting coves into spindles. It will leave a finished surface that is smooth, requiring minimal sanding. These premium performance woodturning tools have a lifetime warranty and will be replaced free of charge if any tool fails due to a material or manufacturing defect. These are excellent full-size carbide tip woodturning tools. ©
Show more +
Specifications
Brand
Rutlands®
Handle Length
320mm
Blade Length
150mm
Overall Length
470mm
Carbide Tip
11mm Diameter
Show more +
5.000
2
5
Customer Reviews
Reviews (2)
Write Review....
Tom Heinersdorff
Very easy to remove wood quickly or delicately. So far a total delight to use on tough eucalyptus root and and powdery burnt wood. But I'm wondering how long the carbide disc will last.
Cieron Dickinson-moore
Im making a number of pens as little gifts for friends. Im using resin blanks and thought the carbide tool would make it a little bit easier. So far so good. Cuts easy and leaves a good finish. This should come in handy for finishing the inside of bowls in the future too. The tool itself came well packaged and is well constructed. It should last many many years, minus the carbide tip of course and when its time is up. Ill be ordering another one.
Show more +
£39.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process