
Steel Sash Clamps - 900mm - Pack of 6
£109.99
inc. vat
Home > Workholding > Bar Clamps > Sash Clamps > Steel Sash Clamps > Steel Sash Clamps - 900mm - Pack of 6
Key Features
- Lifetime Warranty
If any clamp fails due to a material or manufacturing defect it will be replaced free of charge - Class Leading Clamping Force
19000N clamping force means your work will be held securely across a multitude of projects - Solid Cold Drawn Steel Bar
Extremely rigid structure and resistant to bowing and twisting - Unbreakable Clamping Jaws
Grey cast iron heads and slides are guaranteed unbreakable - Flat Bottom Design
Means the clamps will stand unaided without falling over during glue ups - Tapered Jaws
Slightly tapered jaws for true parallel clamping - Fast Action Acme Screw Thread
The hard wearing, precision machined thread enables smooth, fast clamping
Product Details
Steel sash bar clamps are needed to clamp large scale projects where a considerable clamping force is required such as cabinets, doors, worktops and panels. These sash bar clamps are extremely powerful and enable the full clamping force of 19000N to be exerted onto your project without the bar bowing or twisting.
The clamping head and slide are made from grey cast iron and are guaranteed not to break during use. Being flat bottomed allows the clamp to stand, unsupported on the work bench to facilitate clamping of flat panels with ease. The jaws are slightly tapered inwards towards each other so when under clamping pressure they become parallel for positive non slip clamping.
The main bar of the sash clamp has a very thick cross section and is made of high quality cold drawn steel for maximum strength. The head and slide are epoxy powder coated for durability and have been precision machined so that they glide freely and easily along the main bar. The slide can be positioned anywhere on the bar using the predrilled locating holes and is held firmly in position using a solid steel pin. This sturdy steel pin will not bend or break even under maximum load. The head features an extremely hard-wearing steel rolled acme thread which enables smooth fast clamping. A steel tommy bar coupled with the fast action thread enables the maximum force to be exerted onto your work piece with ease.
Supplied in packs of 6 each clamp comes with a lifetime warranty - if any clamp fails due to a material or manufacturing defect it will be replaced free of charge. The clamps are made and assembled by the world's leading clamp manufacturer who also produce the most well-known brand of sash clamps. ©
The clamping head and slide are made from grey cast iron and are guaranteed not to break during use. Being flat bottomed allows the clamp to stand, unsupported on the work bench to facilitate clamping of flat panels with ease. The jaws are slightly tapered inwards towards each other so when under clamping pressure they become parallel for positive non slip clamping.
The main bar of the sash clamp has a very thick cross section and is made of high quality cold drawn steel for maximum strength. The head and slide are epoxy powder coated for durability and have been precision machined so that they glide freely and easily along the main bar. The slide can be positioned anywhere on the bar using the predrilled locating holes and is held firmly in position using a solid steel pin. This sturdy steel pin will not bend or break even under maximum load. The head features an extremely hard-wearing steel rolled acme thread which enables smooth fast clamping. A steel tommy bar coupled with the fast action thread enables the maximum force to be exerted onto your work piece with ease.
Supplied in packs of 6 each clamp comes with a lifetime warranty - if any clamp fails due to a material or manufacturing defect it will be replaced free of charge. The clamps are made and assembled by the world's leading clamp manufacturer who also produce the most well-known brand of sash clamps. ©
Steel sash bar clamps are needed to clamp large scale projects where a considerable clamping force is required such as cabinets, doors, worktops and panels. These sash bar clamps are extremely powerful and enable the full clamping force of 19000N to be exerted onto your project without the bar bowing or twisting.
The clamping head and slide are made from grey cast iron and are guaranteed not to break during use. Being flat bottomed allows the clamp to stand, unsupported on the work bench to facilitate clamping of flat panels with ease. The jaws are slightly tapered inwards towards each other so when under clamping pressure they become parallel for positive non slip clamping.
The main bar of the sash clamp has a very thick cross section and is made of high quality cold drawn steel for maximum strength. The head and slide are epoxy powder coated for durability and have been precision machined so that they glide freely and easily along the main bar. The slide can be positioned anywhere on the bar using the predrilled locating holes and is held firmly in position using a solid steel pin. This sturdy steel pin will not bend or break even under maximum load. The head features an extremely hard-wearing steel rolled acme thread which enables smooth fast clamping. A steel tommy bar coupled with the fast action thread enables the maximum force to be exerted onto your work piece with ease.
Supplied in packs of 6 each clamp comes with a lifetime warranty - if any clamp fails due to a material or manufacturing defect it will be replaced free of charge. The clamps are made and assembled by the world's leading clamp manufacturer who also produce the most well-known brand of sash clamps. ©
The clamping head and slide are made from grey cast iron and are guaranteed not to break during use. Being flat bottomed allows the clamp to stand, unsupported on the work bench to facilitate clamping of flat panels with ease. The jaws are slightly tapered inwards towards each other so when under clamping pressure they become parallel for positive non slip clamping.
The main bar of the sash clamp has a very thick cross section and is made of high quality cold drawn steel for maximum strength. The head and slide are epoxy powder coated for durability and have been precision machined so that they glide freely and easily along the main bar. The slide can be positioned anywhere on the bar using the predrilled locating holes and is held firmly in position using a solid steel pin. This sturdy steel pin will not bend or break even under maximum load. The head features an extremely hard-wearing steel rolled acme thread which enables smooth fast clamping. A steel tommy bar coupled with the fast action thread enables the maximum force to be exerted onto your work piece with ease.
Supplied in packs of 6 each clamp comes with a lifetime warranty - if any clamp fails due to a material or manufacturing defect it will be replaced free of charge. The clamps are made and assembled by the world's leading clamp manufacturer who also produce the most well-known brand of sash clamps. ©
Show more +
Specifications
Brand
Rutlands
Clamping Force
19000N
Clamping Capacity
900mm
Jaw Dimensions
54x28mm
Weight
2.55kg
Show more +
5.000
3
5
Customer Reviews
Reviews (3)
Write Review....
Ron Kelly
Great items. High quality, really sturdy. I would recommend these to anyone seeking top quality at a value price.
Micah Lynn
I've used Rutlands tools before so I felt confident buying these knowing they would be of a good quality. These are indeed very well made and strong and I will surely be trying their various range of other clamps over the next year
Will Tillman
Absolute bargain for a pack of 6 and its good to see they have introduced a lifetime guarantee so they clearly stand by their product, only used these clamps on a few occasions so far but first impressions are excellent
Show more +
£109.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £14.99
- Saturday Next Day UK - £14.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process