Set Up Square with Clamps
£29.99
inc. vat
Home > Workholding > More Clamps > Clamping Squares > Clamping Square Kits > Set Up Square with Clamps
Key Features
- Lifetime Warranty
If any part should fail due to a material or manufacturing defect it will be replaced free of charge - Multifunction Triangle Set Up Square
Used for setting up machinery, setting blade or cutter heights as well as being used as a clamping square - Fence Clamps
Used with the triangle square or can be used independently to attach wooden sub-fences to a bandsaw, bench saw, router table or planer - Laser Engraved Markings
Crisp and clear and can be read easily without straining your eyes - Precision CNC Machined
From aircraft grade aluminium - Black Anodised Finish
Makes the components scratch resistant and durable
Bundles
This Item: Set Up Square with Clamps
£29.99
Product Details
This set contains a multifunction triangle set up square with two fence clamps. The triangle set up square has a multitude of uses in the workshop. It can be used for setting up machinery such as table saws or router table fences. It has a thick cross section so will stand unaided on your table surface to allow you to adjust your machinery with both hands. Easily set your machinery blade to either 45 or 90 degrees. The triangle can also be used as a clamping square when you need to guarantee a joint is at 90 degrees. Simply place the triangle into the corner and secure with the two fence clamps. The square also has inset rare earth magnets that an included steel bar attaches to, which creates a lip and allows 45° and 90° angles to be drawn from the edge of workpieces.
The square has been CNC machined from aircraft grade aluminium; the edges have been machined perfectly flat to ensure that the triangle sits perfectly square when stood upright. The triangle square has a black anodised finish which will protect it against scratches and make it durable. A crisp and clear metric scale has been laser etched onto 2 sides of the square - the vertical scales are especially useful when setting the height of router bits.
As well as being used with the triangle square in this set the fence clamps can also be used to attach a wooden sub-fence to the fence on your bandsaw, bench saw, router table or planer. You simply drill two 10mm diameter holes vertically in the wooden sub fence and then adjust the width of the clamp to reach over your machine standard fence.
You have two adjustments; one is by rotating the knob and the other is by rotating the L shaped acme threaded bar. The capacity range is 20mm to 80mm assuming for a 20mm wide sub-fence. The main body is manufactured from anodised aluminium and the threaded bar is made from a hardened steel. The set comes with a lifetime warranty - if a part fails due to a material or manufacturing defect it will be replaced free of charge. ©
The square has been CNC machined from aircraft grade aluminium; the edges have been machined perfectly flat to ensure that the triangle sits perfectly square when stood upright. The triangle square has a black anodised finish which will protect it against scratches and make it durable. A crisp and clear metric scale has been laser etched onto 2 sides of the square - the vertical scales are especially useful when setting the height of router bits.
As well as being used with the triangle square in this set the fence clamps can also be used to attach a wooden sub-fence to the fence on your bandsaw, bench saw, router table or planer. You simply drill two 10mm diameter holes vertically in the wooden sub fence and then adjust the width of the clamp to reach over your machine standard fence.
You have two adjustments; one is by rotating the knob and the other is by rotating the L shaped acme threaded bar. The capacity range is 20mm to 80mm assuming for a 20mm wide sub-fence. The main body is manufactured from anodised aluminium and the threaded bar is made from a hardened steel. The set comes with a lifetime warranty - if a part fails due to a material or manufacturing defect it will be replaced free of charge. ©
This set contains a multifunction triangle set up square with two fence clamps. The triangle set up square has a multitude of uses in the workshop. It can be used for setting up machinery such as table saws or router table fences. It has a thick cross section so will stand unaided on your table surface to allow you to adjust your machinery with both hands. Easily set your machinery blade to either 45 or 90 degrees. The triangle can also be used as a clamping square when you need to guarantee a joint is at 90 degrees. Simply place the triangle into the corner and secure with the two fence clamps. The square also has inset rare earth magnets that an included steel bar attaches to, which creates a lip and allows 45° and 90° angles to be drawn from the edge of workpieces.
The square has been CNC machined from aircraft grade aluminium; the edges have been machined perfectly flat to ensure that the triangle sits perfectly square when stood upright. The triangle square has a black anodised finish which will protect it against scratches and make it durable. A crisp and clear metric scale has been laser etched onto 2 sides of the square - the vertical scales are especially useful when setting the height of router bits.
As well as being used with the triangle square in this set the fence clamps can also be used to attach a wooden sub-fence to the fence on your bandsaw, bench saw, router table or planer. You simply drill two 10mm diameter holes vertically in the wooden sub fence and then adjust the width of the clamp to reach over your machine standard fence.
You have two adjustments; one is by rotating the knob and the other is by rotating the L shaped acme threaded bar. The capacity range is 20mm to 80mm assuming for a 20mm wide sub-fence. The main body is manufactured from anodised aluminium and the threaded bar is made from a hardened steel. The set comes with a lifetime warranty - if a part fails due to a material or manufacturing defect it will be replaced free of charge. ©
The square has been CNC machined from aircraft grade aluminium; the edges have been machined perfectly flat to ensure that the triangle sits perfectly square when stood upright. The triangle square has a black anodised finish which will protect it against scratches and make it durable. A crisp and clear metric scale has been laser etched onto 2 sides of the square - the vertical scales are especially useful when setting the height of router bits.
As well as being used with the triangle square in this set the fence clamps can also be used to attach a wooden sub-fence to the fence on your bandsaw, bench saw, router table or planer. You simply drill two 10mm diameter holes vertically in the wooden sub fence and then adjust the width of the clamp to reach over your machine standard fence.
You have two adjustments; one is by rotating the knob and the other is by rotating the L shaped acme threaded bar. The capacity range is 20mm to 80mm assuming for a 20mm wide sub-fence. The main body is manufactured from anodised aluminium and the threaded bar is made from a hardened steel. The set comes with a lifetime warranty - if a part fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Fence Clamp Capacity
20mm to 80mm
Trianlge Square Dimension
90mm x 90mm
Show more +
0
5
Customer Reviews
Reviews (0)
Write Review....
£29.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process