In Line Toggle Clamp - 20mm with Plate and Posts
£29.99
inc. vat
Home > Workholding > More Clamps > Toggle Clamps & Plates > Toggle Clamps with Plates & Posts > In Line Toggle Clamp - 20mm with Plate and Posts
Key Features
- Lifetime Warranty
If any plate or clamp fails due to a material or manufacturing defect it will be replaced free of charge - Designed for 3/4" or 20mm Dog Holes
Perfect to use with existing dog holes on workbenches or tapletops - 360° Clamping
Use your toggle clamp at any point around 360° - Increased Capacity
The thickness of the base adds 10mm to the clamping shoe height of in line toggle clamps - Auto Adjust Technology
Clamping arm has 25mm of travel and automatically adjusts to different workpiece widths without manual adjustments - Variable Clamping Force
Change the clamping force with the simple turn of a screw for a delicate or firm hold - Industry Standard Compatible
The plate is supplied with posts to fit inside either standard dog hole diameter - Secure Clamping
Several back tapered rings engage with the hole to prevent the toggle clamp from lifting - Black Anodised Finish
Durable and great looking non marring finish
Product Details
This auto adjusting in line toggle clamp with plate and posts allows you to use the toggle clamp wherever 3/4" or 20mm holes have been drilled. The plates are perfect to use with existing dog holes on workbenches or tabletops. There are four predrilled holes in the plate to allow you to mount your toggle clamp easily. The clamp can then be rotated around 360 degrees once it is placed inside a hole. The plate is 10mm thick which will naturally increase the clamping shoe height of the in line toggle clamp.
With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece width, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.
There are two 125mm steel posts suppled with the plate, one is 3/4" in diameter and the other is 20mm, meaning they will be compatible with either industry standard dog hole diameters. The posts have several back tapered rings along their length which engage with the inner wall of the hole to prevent the post from being pulled upwards when clamping force is applied from the clamp.
The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge. ©
With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece width, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.
There are two 125mm steel posts suppled with the plate, one is 3/4" in diameter and the other is 20mm, meaning they will be compatible with either industry standard dog hole diameters. The posts have several back tapered rings along their length which engage with the inner wall of the hole to prevent the post from being pulled upwards when clamping force is applied from the clamp.
The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge. ©
This auto adjusting in line toggle clamp with plate and posts allows you to use the toggle clamp wherever 3/4" or 20mm holes have been drilled. The plates are perfect to use with existing dog holes on workbenches or tabletops. There are four predrilled holes in the plate to allow you to mount your toggle clamp easily. The clamp can then be rotated around 360 degrees once it is placed inside a hole. The plate is 10mm thick which will naturally increase the clamping shoe height of the in line toggle clamp.
With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece width, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.
There are two 125mm steel posts suppled with the plate, one is 3/4" in diameter and the other is 20mm, meaning they will be compatible with either industry standard dog hole diameters. The posts have several back tapered rings along their length which engage with the inner wall of the hole to prevent the post from being pulled upwards when clamping force is applied from the clamp.
The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge. ©
With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece width, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.
There are two 125mm steel posts suppled with the plate, one is 3/4" in diameter and the other is 20mm, meaning they will be compatible with either industry standard dog hole diameters. The posts have several back tapered rings along their length which engage with the inner wall of the hole to prevent the post from being pulled upwards when clamping force is applied from the clamp.
The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Post Diameters
3/4" and 20mm
Plate Width
65mm
Plate Length
100mm
Plate Height
10mm
Maximum Clamping Force
3000N
Piston Travel
25mm
Show more +
5.000
2
5
Customer Reviews
Reviews (2)
Write Review....
Robert Jefferson
Does exactly as it says on the tin. Good quality and heavy. Catch a little stiff but not a problem
Frank Richards
Great that the product comes with two sizes of post inserts. I ordered alongside a dog fence to give me the option of clamping in workpieces horizontally on my bench. Toggle clamp is good quality and the autoadjusting feature is genius.
Show more +
£29.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process