Horizontal Toggle Clamp - 40mm with Plate for T Track
Horizontal Toggle Clamp - 40mm with Plate for T Track
£29.99
inc. vat
Home > Workholding > More Clamps > Toggle Clamps & Plates > Toggle Clamps with T Track Plates > Horizontal Toggle Clamp - 40mm with Plate for T Track

Key Features

  • Lifetime Warranty
    If any plate or clamp fails due to a material or manufacturing defect it will be replaced free of charge
  • Designed for T Track
    Use the toggle clamp in standard T track
  • Choose Your Orientation
    Two sets of predilled holes allow clamps to be mounted either in line or perpendicularly to track
  • Increased Capacity
    The thickness of the base adds 10mm to the capacity of horizontal clamps
  • Auto Adjust Technology
    Automatically accommodate workpieces from 0mm to 40mm thick without any adjustments
  • Variable Clamping Force
    Change the clamping force with the simple turn of a screw for a delicate or firm hold
  • Black Anodised Finish
    Durable and great looking non marring finish

Show more +

Product Details

This 40mm auto adjusting horizontal toggle clamp and plate is designed to be used with T track to allow you to use the toggle clamp at any point along the length of track. You will be able to quickly position the clamp where needed without the need to drill any holes in a tabletop or bench. There are two sets of predrilled holes in the plate to allow to you mount your toggle clamp either perpendicularly or parallel to your T track. The plate is 10mm thick which will naturally increase the maximum capacity the horizontal toggle clamp.

With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece height, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.

The plate is supplied with four mounting bolts to secure the toggle clamp to the plate. There are two T bolts which have a width of 12.7mm meaning they are compatible with industry standard 8.3mm T track. There are two additional holes in the plate for use with 19mm T track slider bars, meaning the plate can also be used in 19mm T track. Please note that the screws required for use with 19mm slider bars are not included.

The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge.
This 40mm auto adjusting horizontal toggle clamp and plate is designed to be used with T track to allow you to use the toggle clamp at any point along the length of track. You will be able to quickly position the clamp where needed without the need to drill any holes in a tabletop or bench. There are two sets of predrilled holes in the plate to allow to you mount your toggle clamp either perpendicularly or parallel to your T track. The plate is 10mm thick which will naturally increase the maximum capacity the horizontal toggle clamp.

With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece height, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.

The plate is supplied with four mounting bolts to secure the toggle clamp to the plate. There are two T bolts which have a width of 12.7mm meaning they are compatible with industry standard 8.3mm T track. There are two additional holes in the plate for use with 19mm T track slider bars, meaning the plate can also be used in 19mm T track. Please note that the screws required for use with 19mm slider bars are not included.

The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
Maximum Clamping Force 3000N
Clamping Capacity 40mm
Maximum Reach 60mm
T Bolt Width 12mm
Plate Width 100mm
Plate Length 135mm
Plate Height 10mm

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

Tim Grainger

Wow what a difference the plate makes to the useability of a toggle clamp. It can now be used in virtually all corners of my workshop. The drilled holes also accept my bessey toggle clamps.

Show more +

Horizontal Toggle Clamp - 40mm with Plate for T Track

Rutlands
Part No. R3166
£29.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >