Horizontal Toggle Clamp - 40mm with T Track Plate
£29.99
inc. vat
Home > Workholding > More Clamps > Toggle Clamps & Plates > Toggle Clamps with T Track Plates > Horizontal Toggle Clamp - 40mm with T Track Plate
Key Features
- Lifetime Warranty
If any plate or clamp fails due to a material or manufacturing defect it will be replaced free of charge - Designed for T Track
Use the toggle clamp in standard T track - Choose Your Orientation
Two sets of predilled holes allow clamps to be mounted either in line or perpendicularly to track - Increased Capacity
The thickness of the base adds 10mm to the capacity of horizontal clamps - Auto Adjust Technology
Automatically accommodate workpieces from 0mm to 40mm thick without any adjustments - Variable Clamping Force
Change the clamping force with the simple turn of a screw for a delicate or firm hold - Black Anodised Finish
Durable and great looking non marring finish
Bundles
This Item: Horizontal Toggle Clamp - 40mm with T Track Plate
£29.99
Product Details
This 40mm auto adjusting horizontal toggle clamp and plate is designed to be used with T track to allow you to use the toggle clamp at any point along the length of track. You will be able to quickly position the clamp where needed without the need to drill any holes in a tabletop or bench. There are two sets of predrilled holes in the plate to allow to you mount your toggle clamp either perpendicularly or parallel to your T track. The plate is 10mm thick which will naturally increase the maximum capacity the horizontal toggle clamp.
With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece height, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.
The plate is supplied with four mounting bolts to secure the toggle clamp to the plate. There are two T bolts which have a width of 12.7mm meaning they are compatible with industry standard 8.3mm T track. There are two additional holes in the plate for use with 19mm T track slider bars, meaning the plate can also be used in 19mm T track. Please note that the screws required for use with 19mm slider bars are not included.
The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge. ©
With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece height, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.
The plate is supplied with four mounting bolts to secure the toggle clamp to the plate. There are two T bolts which have a width of 12.7mm meaning they are compatible with industry standard 8.3mm T track. There are two additional holes in the plate for use with 19mm T track slider bars, meaning the plate can also be used in 19mm T track. Please note that the screws required for use with 19mm slider bars are not included.
The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge. ©
This 40mm auto adjusting horizontal toggle clamp and plate is designed to be used with T track to allow you to use the toggle clamp at any point along the length of track. You will be able to quickly position the clamp where needed without the need to drill any holes in a tabletop or bench. There are two sets of predrilled holes in the plate to allow to you mount your toggle clamp either perpendicularly or parallel to your T track. The plate is 10mm thick which will naturally increase the maximum capacity the horizontal toggle clamp.
With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece height, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.
The plate is supplied with four mounting bolts to secure the toggle clamp to the plate. There are two T bolts which have a width of 12.7mm meaning they are compatible with industry standard 8.3mm T track. There are two additional holes in the plate for use with 19mm T track slider bars, meaning the plate can also be used in 19mm T track. Please note that the screws required for use with 19mm slider bars are not included.
The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge. ©
With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece height, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw.
The plate is supplied with four mounting bolts to secure the toggle clamp to the plate. There are two T bolts which have a width of 12.7mm meaning they are compatible with industry standard 8.3mm T track. There are two additional holes in the plate for use with 19mm T track slider bars, meaning the plate can also be used in 19mm T track. Please note that the screws required for use with 19mm slider bars are not included.
The plate itself has been CNC machined from aircraft grade aluminium and has been black anodised to provide a durable and great looking, non marring finish. Both the plate and toggle clamp come with a lifetime warranty - if either fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Maximum Clamping Force
3000N
Clamping Capacity
40mm
Maximum Reach
60mm
T Bolt Width
12mm
Plate Width
100mm
Plate Length
135mm
Plate Height
10mm
Show more +
5.000
2
5
Customer Reviews
Reviews (2)
Write Review....
Keith Irving
Well made and sturdy. Already a useful asset in my workshop.
Tim Grainger
Wow what a difference the plate makes to the useability of a toggle clamp. It can now be used in virtually all corners of my workshop. The drilled holes also accept my bessey toggle clamps.
Show more +
£29.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process