Workshop Multi Purpose Vice - 125mm
£119.99
inc. vat
Key Features
- Lifetime Warranty
If any vice fails due to a material or manufacturing defect it will be replaced free of charge - Class Leading Clamping Force
25000N maximum clamping force for assured workholding - 360° Base & Head Rotation
Clamp your workpiece exactly where you want to - Three Sets of Jaws
Standard flat jaws, stepped jaws and pipe jaws - Made By World Leading Vice Manufacturer
Cast, machined and assembled by the world's leading and largest vice manufacturer - Epoxy Powder Coated Finish
Hard wearing, corrosion resistant paintwork - Weighs Over 17kg
Significant mass to dampen vibration
Bundles
This Item: Workshop Multi Purpose Vice - 125mm
£119.99
Product Details
Weighing over 17kg this substantial vice has significant mass to absorb vibration when sawing, drilling, grinding or filing. Manufactured from CNC machined, grey iron castings it features an Acme threaded main screw, for smooth, controlled movement whilst delivering a massive and class leading clamping force up to 25000N.
The main screw is fully protected from dirt and debris, preventing swarf for becoming trapped between the main screw and the cast steel nut. The castings are epoxy powder painted resulting in a hard wearing, corrosion and chip resistant finish. The main head has three sets of jaws; standard 125mm hardened steel flat jaws which are serrated and replaceable, 64mm diameter capacity cast stepped jaws for powerful non slip clamping and replaceable V shaped hardened steel jaws with a 64mm diameter clamping capacity.
Both the head of the vice and the swivel base rotate through 360° and are locked off using two steel tommy bars, allowing for the workpiece to be clamped horizontally, vertically or an any angle required for best access. At the rear, the vice features a large machined anvil measuring 80mm x 65mm, providing a striking surface for a variety of functions. Fully opened the vice has a clamping capacity of 125mm with an overall length of 420mm and standing 220mm in height.
This workshop vice has a lifetime warranty and in the event that the vice fails due to a material or manufacturing defect it will be replaced free of charge. This is an exceptionally heavy duty vice that will rigidly clamp any shape, at any angle for best workpiece access, whether in the workshop, garage or factory. ©
The main screw is fully protected from dirt and debris, preventing swarf for becoming trapped between the main screw and the cast steel nut. The castings are epoxy powder painted resulting in a hard wearing, corrosion and chip resistant finish. The main head has three sets of jaws; standard 125mm hardened steel flat jaws which are serrated and replaceable, 64mm diameter capacity cast stepped jaws for powerful non slip clamping and replaceable V shaped hardened steel jaws with a 64mm diameter clamping capacity.
Both the head of the vice and the swivel base rotate through 360° and are locked off using two steel tommy bars, allowing for the workpiece to be clamped horizontally, vertically or an any angle required for best access. At the rear, the vice features a large machined anvil measuring 80mm x 65mm, providing a striking surface for a variety of functions. Fully opened the vice has a clamping capacity of 125mm with an overall length of 420mm and standing 220mm in height.
This workshop vice has a lifetime warranty and in the event that the vice fails due to a material or manufacturing defect it will be replaced free of charge. This is an exceptionally heavy duty vice that will rigidly clamp any shape, at any angle for best workpiece access, whether in the workshop, garage or factory. ©
Weighing over 17kg this substantial vice has significant mass to absorb vibration when sawing, drilling, grinding or filing. Manufactured from CNC machined, grey iron castings it features an Acme threaded main screw, for smooth, controlled movement whilst delivering a massive and class leading clamping force up to 25000N.
The main screw is fully protected from dirt and debris, preventing swarf for becoming trapped between the main screw and the cast steel nut. The castings are epoxy powder painted resulting in a hard wearing, corrosion and chip resistant finish. The main head has three sets of jaws; standard 125mm hardened steel flat jaws which are serrated and replaceable, 64mm diameter capacity cast stepped jaws for powerful non slip clamping and replaceable V shaped hardened steel jaws with a 64mm diameter clamping capacity.
Both the head of the vice and the swivel base rotate through 360° and are locked off using two steel tommy bars, allowing for the workpiece to be clamped horizontally, vertically or an any angle required for best access. At the rear, the vice features a large machined anvil measuring 80mm x 65mm, providing a striking surface for a variety of functions. Fully opened the vice has a clamping capacity of 125mm with an overall length of 420mm and standing 220mm in height.
This workshop vice has a lifetime warranty and in the event that the vice fails due to a material or manufacturing defect it will be replaced free of charge. This is an exceptionally heavy duty vice that will rigidly clamp any shape, at any angle for best workpiece access, whether in the workshop, garage or factory. ©
The main screw is fully protected from dirt and debris, preventing swarf for becoming trapped between the main screw and the cast steel nut. The castings are epoxy powder painted resulting in a hard wearing, corrosion and chip resistant finish. The main head has three sets of jaws; standard 125mm hardened steel flat jaws which are serrated and replaceable, 64mm diameter capacity cast stepped jaws for powerful non slip clamping and replaceable V shaped hardened steel jaws with a 64mm diameter clamping capacity.
Both the head of the vice and the swivel base rotate through 360° and are locked off using two steel tommy bars, allowing for the workpiece to be clamped horizontally, vertically or an any angle required for best access. At the rear, the vice features a large machined anvil measuring 80mm x 65mm, providing a striking surface for a variety of functions. Fully opened the vice has a clamping capacity of 125mm with an overall length of 420mm and standing 220mm in height.
This workshop vice has a lifetime warranty and in the event that the vice fails due to a material or manufacturing defect it will be replaced free of charge. This is an exceptionally heavy duty vice that will rigidly clamp any shape, at any angle for best workpiece access, whether in the workshop, garage or factory. ©
Show more +
Specifications
Brand
Rutlands®
Clamping Force
25000N
Clamping Capacity
125mm
Jaw Depth
20mm
Jaw Width
125mm
Stepped Jaw Capacity
63mm diameter
V Jaw Capacity
63mm
Overall Length
420mm
Weight
17kg
Show more +
5.000
8
5
Customer Reviews
Reviews (8)
Write Review....
Danny Jacewicz
Michael Kitchen
A substantial piece of kit. Solidly built. Smooth operation. Particularly like the swivel jaw for holding difficult shaped items at different angles. Quite heavy, but should last a very long time. Recommend for a wide variety of engineering jobs and projects.
Malcolm Steward
Real pleased so far , and a lot bigger than I thought.
looks well made . The winding bar is a bit noisy when it drops
down , but that's only a miner point . Recomended .
looks well made . The winding bar is a bit noisy when it drops
down , but that's only a miner point . Recomended .
Phillip Hoggard
Outstanding bit of kit on product and price high five Rutland team
Lester Cox
What a great bit of kit, spent the last 40 years using a standard metal working vice, now able to move work pieces to more accessible angles makes jobs so much easier, really solid tool, a real plus for any workshop.
Paul Turnbull
The only person so far who does not like my new vice was the Parcel Force driver. He moaned and groaned as he carried it up the drive .... "what you ordered a box of led". Fantastic vice that is really practical with its swivel base and swivel head and three sets of jaws. Very well finished in a dark grey paint. If I had seen it in a shop I would have paid more as it really is a big beast. Originally tried to screw it to the bench but gave that up and drilled the bench top and used a couple of coach bolts. Cracking piece of kit.
Dante Lin
As a woodworker doing the occasional metalwork I thought I'd cover both bases and buy this vice. I've so far used it for sanding, planing, drilling and used the other jaws for cutting down some pipes with my angle grinder. Each time it's given me a secure grip and flexibilty to rotate the work however I need it. Impressed
Wayne Allman
Arrived promptly the following day. Incredibly useful to make rotational adjustments when you need to, makes getting a workable angle for planing and grinding a whole lot easier. Locks in nice & tight once adjusted and will not budge. Second set of jaws have been useful for metal pipes etc.
Show more +
£119.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Parcelforce 24 - £6.99
- UPS Next Working Day - £8.99
(Order before 1pm) - International - Choose Destination
- Show Delivery Rates for
- Choose Destination
* Notice
Parcelforce and Royal Mail have upcoming strikes planned on the 30th November and 1st December that could potentially cause a delay to the delivery of your order. Please allow additional time for your order to arrive. We apologise for any inconvenience caused.
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process
After a few uses, I can definitely recommend this vice as a dependable & well made item for your workshop..