Router Table Fence Micro Adjusters

Finely adjust the back and forth position of the router table fence with a level of control not previously possible. Moving the fence freehand often results in inaccuracy and inconsistency, requiring endless tapping or pushing back and forth to achieve the desired position. Each pair of precision engineered adjusters has been designed to sit between the fence and its support brackets, allowing the user to perform careful final adjustments. Save valuable setup time, achieve tighter fitting joints and most importantly, reduce material wastage with fewer trial and error cuts.

Installed within minutes, the rear knobs screw into the supplied slider bars whilst the frontmost knobs replace that of the fence. With each knob loosely secured, the fence is moved as close as possible to its final position and the rear knobs are then locked in place. Smooth, controlled push and pull adjustments can then be made to the position of the fence by simply turning the large, knurled adjustment wheels. Once set, tighten the remaining knobs to lock the fence firmly in position.

Designed to seamlessly integrate with Rutlands® router tables and the R5009 & R5137 router table fences, further enhancing their versatility and precision. The adjusters will also be compatible with other router table fences that work with 19mm T track - there are two sizes of slider bar provided, with the longer bars measuring 19mm x 5mm x 100mm and the shorter bars measuring 19mm x 5mm x 35mm. Supplied as a set of 2 fence adjusters. ©