Brushless Random and Palm Orbital Sanders with M Class Dust Extractor - 25 Litre

The Rutlands® brushless random and palm orbital sanders with 25L M class dust extractor deliver dust-free sanding, capturing 99.9% of dust to improve air quality and safeguard lung health, suitable for applications involving wood dust, MDF, paint, fillers, plaster, masonry and more.

Brushless Random & Palm Orbital Sanders
The sanders deliver maximum operator comfort, engineered for low vibration and low noise. Ergonomically designed, the lightweight, low profile bodies allow the sanders to be used for long periods without fatigue, whether operated flat, vertically or overhead. Supplied 150mm and 125mm backing pads, the random orbital sander runs in a 5.0mm orbit, providing a high material removal rate whilst yielding consistent surface finishes in a range of applications. The palm orbital sander is supplied with an 81mm x 133mm backing pad and runs in a 3.0mm orbit, for fine sanding and finishing applications, reaching into tight corners, profiles and hard-to-reach areas such as windows, doors and frames. 

The 350W high performance brushless motors maintain constant speed under load, ensuring a consistent material removal rate and finish quality throughout. The soft start motors with electronic brake gradually and safely build up speed and stop instantly. The motors operate between a 4,000 to 10,000rpm range, with the paddle levers allowing careful control of the speed between 4,000rpm and the current max rpm, set using the + and - buttons and LED indicators.

M Class Dust Extractor with Auto Start and Auto Filter Cleaning - 25 Litre
The highly portable 25L M class dust extractor combines consistently high suction power, auto filter cleaning and auto start functionality, ensuring a safer, dust-free work environment. Included is a filter bag, HEPA filter, 3.5m flexible hose and telescopic tube with floor brush, round brush and small crevice attachments.

Four operating modes (manual, manual & clean, auto, auto & clean) provide the flexibility to work how you want. Auto filter cleaning pulsates the HEPA filter every 20 seconds, shifting accumulated dust to prevent clogging, prolong filter life and maintain maximum suction power. Health and safety compliant for on-site use, an audible and visual alarm will advise you when the suction rate has dropped to an unsafe level. Auto start functionality activates the dust extractor simultaneously with the sander, running for a further 5 seconds after the sander is switched off to clear any dust left in the hose.

The extractor should not be operated for more than 20 minutes continuously. After 20 minutes of continuous operation, turn off the unit and allow a 15 minute resting period before next use. Clean the body, filter and dust bag after use. ©