Random Orbital Sander with Turbo Gear Drive with M Class Dust Extractor - 40 Litre

Two sanders in one - the Rutlands® 150mm random orbital sander combines an aggressive, high removal rate turbo gear-driven coarse sander, with a super-fine finishing low vibration random orbital sander. Switch from stall-free heavy stock removal to ultra-fine finishing at the flick of a switch. The M class dust extractor with auto filter cleaning captures 99.9% of dust for proven protection against harmful dust with an occupational exposure limit (OEL) greater than 0.1 mg/m³. The quiet, efficient dust extractor synchronises with the sander, automatically activating as you work. The dust extractor will run for a further 5 seconds after the sander is switched off, clearing any dust left in the hose.

Random Orbital Sander with Turbo Gear Drive - 150mm, 5.0mm Orbit
‘Free rotation’ mode runs in a standard 5.0mm random orbit, oscillating only through rotational momentum. This ensures the highest quality surface finish, free from swirl marks or scratches, whilst reducing the risk of applying too much pressure during lighter sanding tasks. Switch to ‘turbo gear drive’, and the random orbit is forcibly driven by gears, allowing you to apply heavy pressure with zero stalling. This provides exceptionally high sanding power and a 50% quicker material removal rate, stripping old paint and finishes, or flattening rough surfaces, with unrelenting speed.

Driving the sander is an 800W high torque motor, running at a variable speed range of between 3,300 - 7,400 RPM. An electronic speed controller maintains the selected speed under load, for consistent results no matter the application. The side mounted slide switch prevents accidental start-up and can be locked in the on position for continuous operation.

An auxiliary handle screws into the left or right hand side of the sander and provides maximum control during coarse sanding, or when working vertically or overhead. The clip-on edge protector protects both the edge of the backing pad, and adjacent surfaces, from damage when sanding right up against corners or edges. Supplied with the sander is a 150mm backing pad, auxiliary side handle and backing pad removal key.

M Class Dust Extractor with Auto Start and Auto Filter Cleaning - 40 Litre
This M class dust extractor combines consistently high suction power, auto filter cleaning and auto start functionality, ensuring a safer, dust-free work environment. Health and safety compliant for on-site use, an audible and visual alarm will advise you when the suction rate has dropped to an unsafe level. A variable air-flow control knob adjusts the suction to suit all surfaces, up to a maximum air flow rate of 216 m³/hr.

With a sleek, ergonomic design, the extractor is easily manoeuvrable and offers ample on-board storage for hoses and attachments. A generous 40 litre drum capacity allows you to work for longer, reducing downtime emptying the machine. The soft grip trolley handle folds down when not in use, and the extractor can be locked in place using the brake-operated non-marring castors. Includes filter bag, HEPA filter, flexible vacuum hose, flexible power tool hose and telescopic tube with floor brush, round brush and small crevice attachments. Suitable for wet or dry extraction.

The extractor should not be operated for more than 20 minutes continuously. After 20 minutes of continuous operation, turn off the unit and allow a 15 minute resting period before next use. Clean the body, filter and dust bag after use. ©