Panel Clamp - 4 Way
Panel Clamp - 4 Way
£39.99
inc. vat

Key Features

  • Lifetime Warranty
    If the panel clamp fails due to a material or manufacturing defect it will be replaced free of charge
  • Class Leading Clamping Force
    High clamping force ensures your work is always held securely
  • Make Your Own Panel Pressure Clamp
    Ideal for gluing doors, table tops and panels
  • Four Way Pressure
    Exert equal pressure in four directions; up, down, left & right
  • Just Add Timber
    Simply attach the clamps to any length of 38mm x 38mm timber
  • Keep Projects Square
    Minimal warping or mis-aligning during clamping
  • Large Clamping Capacity
    Maximum work piece thickness is 32mm

Show more +

Bundles

Total: £49.98
This Item: Panel Clamp - 4 Way
£39.99

Product Details

This unique clamp exerts equal pressure in four directions; up, down, right and left. It is therefore ideal for gluing and clamping shelves, cabinet doors, table tops, laminates and veneers and many other projects. As this clamp exerts even pressure across the work, there is minimal chance of it warping or mis-aligning during clamping which may happen when using bar clamps to construct panels from multiple boards. 

Easy to make and use, you simply attach the clamps to any length of 38mm by 38mm timber with the hardware provided, position the turn handle mechanism and rotate to exert pressure on the inserted work piece. Maximum work piece thickness is 32mm. This is an excellent clamping system that will save valuable time and money.

Contains: 1 x mounting block, 1 x support rake, 1 x clamp and 1 x crank. Each panel clamp comes with a lifetime warranty - if any panel clamp fails due to a material or manufacturing defect it will be replaced free of charge. ©
This unique clamp exerts equal pressure in four directions; up, down, right and left. It is therefore ideal for gluing and clamping shelves, cabinet doors, table tops, laminates and veneers and many other projects. As this clamp exerts even pressure across the work, there is minimal chance of it warping or mis-aligning during clamping which may happen when using bar clamps to construct panels from multiple boards. 

Easy to make and use, you simply attach the clamps to any length of 38mm by 38mm timber with the hardware provided, position the turn handle mechanism and rotate to exert pressure on the inserted work piece. Maximum work piece thickness is 32mm. This is an excellent clamping system that will save valuable time and money.

Contains: 1 x mounting block, 1 x support rake, 1 x clamp and 1 x crank. Each panel clamp comes with a lifetime warranty - if any panel clamp fails due to a material or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
Maximum Workpiece Thickness 32mm

Show more +
5.000 13 5

Customer Reviews

Reviews (13)
Write Review....

Paul Burring

Nice strong clamps, every shop needs a few sets

Bren B

Such a great clamp it has made life in the workshop so much easier. The definition of a useful tool.

Luke Kendrick

Excellent value clamps. Well worth a dry run through to save yourself some stress as the placement of each piece is important. Easy enough once you get the hang of it though.
As others have mentioned they are very solid and well made.
I got 2 while they were on sale which represents really amazing value.

Mark Harben

Straightforward, easy to use and effective. Good value, highly recommended.

Leslie Fancourt

excellent pair of clamps strong and really flexible in use.

Aleksander Sidorowicz

Really solid Clamps. I use them to glue panels on a viking shield. Easy to use. Recommend

Steve

Excellent quality of clamps. I was recommended to buy these by a friend and they have been used in nearly every project so far.

Colin Ashburn

I bought a pair of these some months ago, and found them fairly straight forward to use. While I was trying to get the right sized wood to use as the bars, I decided to try a couple of square steel tubes I had in the garage, luckily these were 38mm x 38mm, I used this set in one and wood in the other.
Although they both did exactly the same job, I found that the steel tubes were much lighter than the wood I was using, so I ordered another set of identical steel tubes for the second clamp.
I've just ordered two more of these clamps for a large project I have - and 2 sets of steel tubes.
I would definitely recommend these clamps.

Tony Buckfield

Bought mainly for panel door and kitchen cupboards etc, and they work very well, very simple to use just follow the guide and you can knock this up in 5-10 mins, guide + 18" but you can go well beyond that, just use a couple of g-clamps etc in the middle to support the work, very good, they could upscale these for bigger jobs? Tony

John R

I am making a wardrobe out of 150mm wide x 15mm thick tongue and grooved oak and needed a method of clamping the back boards rigidly together after applying the glue. The wardrobe has a total of 2 doors, 2 side and 1 back panel so I bought 6 of these clamps. After trial and error setting the first one up, I quickly assembled the rest. They are superb, as the steel work is very heavy duty and you never feel like you are straining the clamps. When I released the clamps the panels remained rock solid and the amount of glue that had seeped out from the joints showed how much pressure had been exerted. Excellent.

Brian Dance

Bought 4 to primarily glue boards together. They just take a little getting used to but they work!! As always a dry run first and to help, put offcuts a little thicker than the boards to keep the wood bars apart, then pop them out for the glue up. Much better than umpteen clamps I once used.

Roger Blake

I now have four of these clamps and must say that I'm really impressed. As they use 2x2 timber for the clamp bars, you can make whatever length clamp you need. Basically, I've replaced most of my other clamps with these. If you do a lot of jointing work, these are definitely worth a look.

Michael Ashmore

These clamps are excellent. I wasn't sure whether they would perform and give me the clamping pressure I needed but I had a trial run with them and I was amazed at the result. The board was perfect with no signs of warping or cupping.

Show more +

Panel Clamp - 4 Way

Rutlands®
Part No. R3071
£39.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >