Router Bit - Rabbeting - D=50mm H=20mm T=6,8,10,12,15,20mm L=75mm S=1/2"
£79.99
inc. vat
Home > Router Bits > TCT Router Bits > TCT Router Bit Sets > Rabbeting with Bearing Bit Sets > Router Bit - Rabbeting - D=50mm H=20mm T=6,8,10,12,15,20mm L=75mm S=1/2"
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Rabbeting with Bearing Bits
Used to produce fast and accurate rebates on the edges of material - Interchangeable Bearing Guides
Provide 6 widths of rebate: 6, 8, 10, 12, 15 & 20mm - Diamond Ground Micro-Grain Tungsten Carbide Tips
Micro-grain structure means the blades offer long lasting hardness and superior edge retention - Perfectly Balanced Machined Steel Bodies
Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life - Brazed By Induction
The tips are attached by induction creating an extremely strong joint between tip and body - Cutting Edge Shear Angle
Gives a smoother, slicing cut to eliminate tear-out and give a superior finish - Anti Kick Back Design
Allows you work safely in accordance with German DIN standards
Bundles
This Item: Router Bit - Rabbeting - D=50mm H=20mm T=6,8,10,12,15,20mm L=75mm S=1/2"
£79.99
Grip Blocks - Pack of 12
£39.99
Product Details
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Rabbeting with Bearing Bits
Rabbeting with bearing bits are used to produce fast and accurate rebates on the edges of material. 6 interchangeable bearing guides are supplied, allowing the bits to follow straight and shaped workpieces. Bearing guides should be selected according to the width of rebate required. These bits are typically used for joint making, recessing the back of frames for accepting glass, and producing inset door, drawer and cabinet fronts.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Rabbeting with Bearing Bits
Rabbeting with bearing bits are used to produce fast and accurate rebates on the edges of material. 6 interchangeable bearing guides are supplied, allowing the bits to follow straight and shaped workpieces. Bearing guides should be selected according to the width of rebate required. These bits are typically used for joint making, recessing the back of frames for accepting glass, and producing inset door, drawer and cabinet fronts.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Rabbeting with Bearing Bits
Rabbeting with bearing bits are used to produce fast and accurate rebates on the edges of material. 6 interchangeable bearing guides are supplied, allowing the bits to follow straight and shaped workpieces. Bearing guides should be selected according to the width of rebate required. These bits are typically used for joint making, recessing the back of frames for accepting glass, and producing inset door, drawer and cabinet fronts.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Rabbeting with Bearing Bits
Rabbeting with bearing bits are used to produce fast and accurate rebates on the edges of material. 6 interchangeable bearing guides are supplied, allowing the bits to follow straight and shaped workpieces. Bearing guides should be selected according to the width of rebate required. These bits are typically used for joint making, recessing the back of frames for accepting glass, and producing inset door, drawer and cabinet fronts.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
D
50mm
H
20mm
T
6,8,10,12,15,20mm
L
75mm
n.max
18,000
S
1/2"
Show more +
5.000
5
5
Customer Reviews
Reviews (5)
Write Review....
Mark Poyner
A superp set used in my table run as sweet as a die and having the differant bearings make depth setting a snap. I use a straight edge to set my fence to the bearing as a fence gives better results than a bearing but it is so quick to do and no measuring. Used to cut the tongue on hard wood tongue and grove as it is so much more robust than a slot cutter.
Gavin White
A handy set that makes cutting rebates of various sizes easy. Cutter is of good quality and bearings can be switched to other tornado cutters as needed.
Atte Pitkänen
Good quality set of rabbet bits; no missing pieces. Alltogether no cons.
David Sullivan
As ever a great product well made and fantastic service from Rutland's
Anthony Atkins
Good quality product that saves having various sized rebate bits.
Well done Rutland yet again
Well done Rutland yet again
Show more +
Router Bit - Rabbeting - D=50mm H=20mm T=6,8,10,12,15,20mm L=75mm S=1/2"
Rutlands®
Part No. R5626
£79.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process