Premium Electronic Router Lift & Motor
Premium Electronic Router Lift & Motor
£799.99
inc. vat
Home > New Arrivals > Premium Electronic Router Lift & Motor

Key Features

  • Lifetime Warranty
    If any router lift fails due to a material or manufacturing defect the component will be replaced free of charge
  • Premium Electronic Router Lift & Motor
    The perfect combination to equip your workshop with the next level of routing capabilities
  • Digital Router Lift Control Box
    Superfast set up and pin point accuracy of the router bit height to 0.1mm
  • Keypad Control 1
    Raise or lower the lift by pressing and holding the up or down button until you reach your desired height
  • Keypad Control 2
    Raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required
  • Powerful 2400W Motor
    Tackles the most demanding hardwoods and end grain with complete ease
  • Variable Speed Control Dial
    Operates between 10,000 to 22,000rpm, letting you select the speed most appropriate for your router bit
  • Soft Start Technology
    Allows the motor to gradually increase the speed after powering on, reducing kickback and strain on your router lift and table
  • The Height Won't Slip
    Inbuilt thread tensioning design to ensure that the router will automatically lock in position after setting the cutting height
  • Beautifully Machined
    CNC machined carriage and arms mounted on sealed-for-life bearings for perfect travel

Show more +

Bundles

Product Details

This premium electronic router lift and motor are the perfect addition to your workshop to upgrade your routing capabilities. Noticeably improve the accuracy and quality of your work compared to using plunge routers mounted to insert plates. This package provides pin point electronic accuracy with super fast set up and adjustment using the digital control box. Purposefully designed to seamlessly work together the combination will fit into Rutlands, Jessem or homemade router table tops providing the hole dimensions are 298 x 235mm to accept the lift plate.

The premium electronic router lift is without doubt the finest electronic router lift available. It will significantly reduce set up time whilst ensuring pin point routing accuracy. The rise and fall of the router lift is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments.

There are two operating modes for the lift, the first method is to raise or lower the lift by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height by pressing the set zero height button.

The premium 2400W (3 hp) router motor generates high levels of torque, powerful enough to tackle the toughest hardwoods and end grain. There is a variable speed control dial situated on the bottom of the unit with a wide range of rotational speeds from anywhere between 10,000 to 22,000 rpm. The motor has soft start technology and will safely increase the speed gradually from zero to the desired speed set by the dial. This eliminates any kickback or jerking of the motor body and does not put unnecessary strain on your router lift and table.

Its intelligent electronic speed control system means the motor will adjust to feedback to maintain a constant speed between no-load and load conditions. The premium router motor has been designed to be exceptionally quiet and virtually vibration free. The motor comes fitted with a heavy duty 2 metre cable with a 13 amp, 230V three pin plug. Use in conjunction with the Rutlands R5013 premium router table NVR power switch for the safest possible routing experience.

The top plate is CNC machined from 10mm thick aluminium plate and has a 100mm opening for accepting insert rings. The plate can be levelled to a table top via the 8 micro adjustment screws. The electronic router lift has a lifetime warranty and in the event of failure due to a material or manufacturing defect the component will be replaced free of charge. This excludes the router motor which is covered by our standard electrical goods warranty.
This premium electronic router lift and motor are the perfect addition to your workshop to upgrade your routing capabilities. Noticeably improve the accuracy and quality of your work compared to using plunge routers mounted to insert plates. This package provides pin point electronic accuracy with super fast set up and adjustment using the digital control box. Purposefully designed to seamlessly work together the combination will fit into Rutlands, Jessem or homemade router table tops providing the hole dimensions are 298 x 235mm to accept the lift plate.

The premium electronic router lift is without doubt the finest electronic router lift available. It will significantly reduce set up time whilst ensuring pin point routing accuracy. The rise and fall of the router lift is operated by the digital control box which features an LED display. You simply press the start button on the control box and then select either metric or imperial graduations. Metric settings are displayed in 0.1mm increments and imperial settings in 0.001" increments.

There are two operating modes for the lift, the first method is to raise or lower the lift by pressing and holding the up or down button on the key pad until you reach your desired height. The second method is to raise or lower the lift by a specific increment by entering into the keypad the amount of height adjustment required. You can re-set to zero at any height by pressing the set zero height button.

The premium 2400W (3 hp) router motor generates high levels of torque, powerful enough to tackle the toughest hardwoods and end grain. There is a variable speed control dial situated on the bottom of the unit with a wide range of rotational speeds from anywhere between 10,000 to 22,000 rpm. The motor has soft start technology and will safely increase the speed gradually from zero to the desired speed set by the dial. This eliminates any kickback or jerking of the motor body and does not put unnecessary strain on your router lift and table.

Its intelligent electronic speed control system means the motor will adjust to feedback to maintain a constant speed between no-load and load conditions. The premium router motor has been designed to be exceptionally quiet and virtually vibration free. The motor comes fitted with a heavy duty 2 metre cable with a 13 amp, 230V three pin plug. Use in conjunction with the Rutlands R5013 premium router table NVR power switch for the safest possible routing experience.

The top plate is CNC machined from 10mm thick aluminium plate and has a 100mm opening for accepting insert rings. The plate can be levelled to a table top via the 8 micro adjustment screws. The electronic router lift has a lifetime warranty and in the event of failure due to a material or manufacturing defect the component will be replaced free of charge. This excludes the router motor which is covered by our standard electrical goods warranty.

Show more +

Specifications

Brand Rutlands
R5063 Premium Electronic Router Lift
Power 230V
Mounting Plate Size 298mm x 235mm x 10mm
Lift Total Height 330mm
Insert Ring Diameter 100mm
Insert Ring Supplied Diameter 50mm
Suits Motor Diameter 104mm to 110mm
Digital Display Metric and Imperial
Digital Increments 0.1mm or 0.001"
Maximum Travel 75mm
Weight 9kg
R5018 Premium Router Lift Motor
Motor Power Input Rating 2400 watt (3 hp)
Motor Power Output Rating 1800 watt
Included Collets 1/2" and 1/4"
Motor Rotational Speed Between 10,000 and 22,000rpm

Show more +
5.000 3 5

Customer Reviews

Reviews (3)
Write Review....

John Bonsall

When using large raised filed panel cutters, even in hardwood this little beauty does not falter and allows for an exceptional finish. My previous Makita 3612C router would slow under heavy loads and end up burning the surface.

Paul Fischer

I toyed with ordering the electronic lift for a couple of days trying to justify to myself if I could warrant such a tool. I took the plunge and received delivery a couple of days ago. I have a Jessem table with router lift that you raise and lower by a side handwheel. I removed my old lift and replace it with my new electronic version. The table opening size was the same, so the fit was simple. I'm assuming that router table insert sizes are becoming standard now - at last. I attached the control box to the stand and positioned it at a slight angle so I could clearly see the keypad. I switched the control box on, pressed and held the up button and the lift smoothly raised itself with a quiet purring sound. There is a dedicated motor built into the lift that rotates via a drive belt, a nut on the main threaded spindle. As the nut rotates the carriage of the lift moves up and down. It's extremely precise and you can stop the movement instantaneously by releasing your finger form the key pad. After playing with the lift for a couple of hours to get a clear understanding of its operations I set to work on my first project. I needed to run a 12mm wide groove in tulip wood to a depth of 8.5mm. I set the control box to zero when the top of my router bit was flush with the router table and then keyed in 8.5mm to the control box. I pressed enter and the bit rose by 8.5mm. I made my first pass and then measured using a digital depth gauge the routed groove and it was precisely 8.5mm deep all the way along. I justified my purchase that very moment. An excellent piece of equipment that I will highly recommend to anyone.

tom west

this motor is a beast, so powerful when you need it, came with 2 collets which is useful been using it for some long sessions and its been brill

Show more +

Premium Electronic Router Lift & Motor

Rutlands
Part No. R5078
£799.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >